Skip to contentSkip to conversation

userspace MHI client interface driver

PATCH Superseded Hemant Kumar 2 participants 7 messages Dec 3, 2020 – Dec 4, 2020

Subsystems (5)

v15 of 18 Superseded Latest is v18 →

lore
Share & tools
lore
#0 lore raw

v15 cover userspace MHI client interface driver

This patch series adds support for UCI driver. UCI driver enables userspace clients to communicate to external MHI devices like modem and WLAN. UCI driver probe creates standard character device file nodes for userspace clients to perform open, read, write, poll and release file operations. These file operations call MHI core layer APIs to perform data transfer using MHI bus to communicate with MHI device. Patch is tested using arm64 and x86 based platform.

v15:
- Updated documentation related to poll and release operations.

V14:
- Fixed device file node format to /dev/<mhi_dev_name> instead of /dev/mhi_<mhi_dev_name> because "mhi" is already part of mhi device name. For example old format: /dev/mhi_mhi0_QMI new format: /dev/mhi0_QMI.
- Updated MHI documentation to reflect index mhi controller name in QMI usage example.

V13:
- Removed LOOPBACK channel from mhi_device_id table from this patch series. Pushing a new patch series to add support for LOOPBACK channel and the user space test application. Also removed the description from kernel documentation.
- Added QMI channel to mhi_device_id table. QMI channel has existing libqmi support from user space.
- Updated kernel Documentation for QMI channel and provided external reference for libqmi.
- Updated device file node name by appending mhi device name only, which already includes mhi controller device name.

V12:
- Added loopback test driver under selftest/drivers/mhi. Updated kernel documentation for the usage of the loopback test application.
- Addressed review comments for renaming variable names, updated inline comments and removed two redundant dev_dbg.

V11:
- Fixed review comments for UCI documentation by expanding TLAs and rewording some sentences.

V10:
- Replaced mutex_lock with mutex_lock_interruptible in read() and write() file ops call back.

V9:
- Renamed dl_lock to dl_pending _lock and pending list to dl_pending for clarity.
- Used read lock to protect cur_buf.
- Change transfer status check logic and only consider 0 and -EOVERFLOW as only success.
- Added __int to module init function.
- Print channel name instead of minor number upon successful probe.

V8:
- Fixed kernel test robot compilation error by changing %lu to %zu for size_t.
- Replaced uci with UCI in Kconfig, commit text, and comments in driver code.
- Fixed minor style related comments.

V7:
- Decoupled uci device and uci channel objects. uci device is associated with device file node. uci channel is associated with MHI channels. uci device refers to uci channel to perform MHI channel operations for device file operations like read() and write(). uci device increments its reference count for every open(). uci device calls mhi_uci_dev_start_chan() to start the MHI channel. uci channel object is tracking number of times MHI channel is referred. This allows to keep the MHI channel in start state until last release() is called. After that uci channel reference count goes to 0 and uci channel clean up is performed which stops the MHI channel. After the last call to release() if driver is removed uci reference count becomes 0 and uci object is cleaned up.
- Use separate uci channel read and write lock to fine grain locking between reader and writer.
- Use uci device lock to synchronize open, release and driver remove.
- Optimize for downlink only or uplink only UCI device.

V6:
- Moved uci.c to mhi directory.
- Updated Kconfig to add module information.
- Updated Makefile to rename uci object file name as mhi_uci
- Removed kref for open count

V5:
- Removed mhi_uci_drv structure.
- Used idr instead of creating global list of uci devices.
- Used kref instead of local ref counting for uci device and open count.
- Removed unlikely macro.

V4:
- Fix locking to protect proper struct members.
- Updated documentation describing uci client driver use cases.
- Fixed uci ref counting in mhi_uci_open for error case.
- Addressed style related review comments.

V3: Added documentation for MHI UCI driver.

V2:
- Added mutex lock to prevent multiple readers to access same
- mhi buffer which can result into use after free. Hemant Kumar (4):
bus: mhi: core: Add helper API to return number of free TREs
bus: mhi: core: Move MHI_MAX_MTU to external header file
docs: Add documentation for userspace client interface
bus: mhi: Add userspace client interface driver

 Documentation/mhi/index.rst     |   1 +
 Documentation/mhi/uci.rst       |  95 ++++++
 drivers/bus/mhi/Kconfig         |  13 +
 drivers/bus/mhi/Makefile        |   3 +
 drivers/bus/mhi/core/internal.h |   1 -
 drivers/bus/mhi/core/main.c     |  12 +
 drivers/bus/mhi/uci.c           | 664 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mhi.h             |  12 +
 8 files changed, 800 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/mhi/uci.rst
 create mode 100644 drivers/bus/mhi/uci.c
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#4 lore raw

PATCH v15 4/4 bus: mhi: Add userspace client interface driver

This MHI client driver allows userspace clients to transfer raw data between MHI device and host using standard file operations. Driver instantiates UCI device object which is associated to device file node. UCI device object instantiates UCI channel object when device file node is opened. UCI channel object is used to manage MHI channels by calling MHI core APIs for read and write operations. MHI channels are started as part of device open(). MHI channels remain in start state until last release() is called on UCI device file node. Device file node is created with format

/dev/<mhi_device_name>

Currently it supports QMI channel.

---
 drivers/bus/mhi/Kconfig  |  13 +
 drivers/bus/mhi/Makefile |   3 +
 drivers/bus/mhi/uci.c    | 664 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 680 insertions(+)
 create mode 100644 drivers/bus/mhi/uci.c
drivers/bus/mhi/Kconfig +13 -0
index da5cd0c..5194e8e 100644
@@ -29,3 +29,16 @@ config MHI_BUS_PCI_GENERIC
 	  This driver provides MHI PCI controller driver for devices such as
 	  Qualcomm SDX55 based PCIe modems.
 
+config MHI_UCI
+	tristate "MHI UCI"
+	depends on MHI_BUS
+	help
+	  MHI based Userspace Client Interface (UCI) driver is used for
+	  transferring raw data between host and device using standard file
+	  operations from userspace. Open, read, write, poll and close
+	  operations are supported by this driver. Please check
+	  mhi_uci_match_table for all supported channels that are exposed to
+	  userspace.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called mhi_uci.
drivers/bus/mhi/Makefile +3 -0
index 0a2d778..69f2111 100644
@@ -4,3 +4,6 @@ obj-y += core/
 obj-$(CONFIG_MHI_BUS_PCI_GENERIC) += mhi_pci_generic.o
 mhi_pci_generic-y += pci_generic.o
 
+# MHI client
+mhi_uci-y := uci.o
+obj-$(CONFIG_MHI_UCI) += mhi_uci.o
drivers/bus/mhi/uci.c new file +664 -0

664 lines not on this page · raw message

Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#1 lore raw

PATCH v15 1/4 bus: mhi: core: Add helper API to return number of free TREs

In reply to Hemant Kumar

Introduce mhi_get_free_desc_count() API to return number of TREs available to queue buffer. MHI clients can use this API to know before hand if ring is full without calling queue API.

---
 drivers/bus/mhi/core/main.c | 12 ++++++++++++
 include/linux/mhi.h         |  9 +++++++++
 2 files changed, 21 insertions(+)
drivers/bus/mhi/core/main.c +12 -0
index 702c31b..74a25e7 100644
@@ -260,6 +260,18 @@ int mhi_destroy_device(struct device *dev, void *data)
 	return 0;
 }
 
+int mhi_get_free_desc_count(struct mhi_device *mhi_dev,
+				enum dma_data_direction dir)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct mhi_chan *mhi_chan = (dir == DMA_TO_DEVICE) ?
+		mhi_dev->ul_chan : mhi_dev->dl_chan;
+	struct mhi_ring *tre_ring = &mhi_chan->tre_ring;
+
+	return get_nr_avail_ring_elements(mhi_cntrl, tre_ring);
+}
+EXPORT_SYMBOL_GPL(mhi_get_free_desc_count);
+
 void mhi_notify(struct mhi_device *mhi_dev, enum mhi_callback cb_reason)
 {
 	struct mhi_driver *mhi_drv;
include/linux/mhi.h +9 -0
index aa9757e..e36d575 100644
@@ -599,6 +599,15 @@ void mhi_set_mhi_state(struct mhi_controller *mhi_cntrl,
 void mhi_notify(struct mhi_device *mhi_dev, enum mhi_callback cb_reason);
 
 /**
+ * mhi_get_free_desc_count - Get transfer ring length
+ * Get # of TD available to queue buffers
+ * @mhi_dev: Device associated with the channels
+ * @dir: Direction of the channel
+ */
+int mhi_get_free_desc_count(struct mhi_device *mhi_dev,
+				enum dma_data_direction dir);
+
+/**
  * mhi_prepare_for_power_up - Do pre-initialization before power up.
  *                            This is optional, call this before power up if
  *                            the controller does not want bus framework to
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#2 lore raw

PATCH v15 2/4 bus: mhi: core: Move MHI_MAX_MTU to external header file

In reply to Hemant Kumar

Currently this macro is defined in internal MHI header as a TRE length mask. Moving it to external header allows MHI client drivers to set this upper bound for the transmit buffer size.

---
 drivers/bus/mhi/core/internal.h | 1 -
 include/linux/mhi.h             | 3 +++
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/bus/mhi/core/internal.h +0 -1
index 6f80ec3..2b9c063 100644
@@ -453,7 +453,6 @@ enum mhi_pm_state {
 #define CMD_EL_PER_RING			128
 #define PRIMARY_CMD_RING		0
 #define MHI_DEV_WAKE_DB			127
-#define MHI_MAX_MTU			0xffff
 #define MHI_RANDOM_U32_NONZERO(bmsk)	(prandom_u32_max(bmsk) + 1)
 
 enum mhi_er_type {
include/linux/mhi.h +3 -0
index e36d575..f072605 100644
@@ -15,6 +15,9 @@
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 
+/* MHI client drivers to set this upper bound for tx buffer */
+#define MHI_MAX_MTU 0xffff
+
 #define MHI_MAX_OEM_PK_HASH_SEGMENTS 16
 
 struct mhi_chan;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#3 lore raw

PATCH v15 3/4 docs: Add documentation for userspace client interface

In reply to Hemant Kumar

MHI userspace client driver is creating device file node for user application to perform file operations. File operations are handled by MHI core driver. Currently QMI MHI channel is supported by this driver.

---
 Documentation/mhi/index.rst |  1 +
 Documentation/mhi/uci.rst   | 95 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 96 insertions(+)
 create mode 100644 Documentation/mhi/uci.rst
Documentation/mhi/index.rst +1 -0
index 1d8dec3..c75a371 100644
@@ -9,6 +9,7 @@ MHI
 
    mhi
    topology
+   uci
 
 .. only::  subproject and html
 
Documentation/mhi/uci.rst new file +95 -0

95 lines not on this page · raw message

Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#5 lore raw

Re: [PATCH v15 4/4] bus: mhi: Add userspace client interface driver

In reply to Hemant Kumar
Quoted 10 lines · Hemant Kumar

This MHI client driver allows userspace clients to transfer raw data between MHI device and host using standard file operations. Driver instantiates UCI device object which is associated to device file node. UCI device object instantiates UCI channel object when device file node is opened. UCI channel object is used to manage MHI channels by calling MHI core APIs for read and write operations. MHI channels are started as part of device open(). MHI channels remain in start state until last release() is called on UCI device file node. Device file node is created with format

Quoted 7 lines

/dev/<mhi_device_name>

Currently it supports QMI channel.

You dropped Loic's tested by. Was that a mistake, or did something actually change which would invalidate his testing?

Signature · 3 lines
Jeffrey Hugo
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
#6 lore raw

Re: [PATCH v15 4/4] bus: mhi: Add userspace client interface driver

Quoted 13 lines · Jeffrey Hugo
Quoted 12 lines · Hemant Kumar

This MHI client driver allows userspace clients to transfer raw data between MHI device and host using standard file operations. Driver instantiates UCI device object which is associated to device file node. UCI device object instantiates UCI channel object when device file node is opened. UCI channel object is used to manage MHI channels by calling MHI core APIs for read and write operations. MHI channels are started as part of device open(). MHI channels remain in start state until last release() is called on UCI device file node. Device file node is created with format

/dev/<mhi_device_name>

Quoted 8 lines
Quoted 5 lines

Currently it supports QMI channel.

You dropped Loic's tested by.  Was that a mistake, or did something actually change which would invalidate his testing?

Thanks for pointing this out, it was my bad. Re-sending the patch.

Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project