patch "iio: imu: st_lsm6dsx: fix edge-trigger interrupts" added to staging-next
Subsystems (3)
This is a note to let you know that I've just added the patch titled
iio: imu: st_lsm6dsx: fix edge-trigger interrupts
to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-next branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will also be merged in the next major kernel release during the merge window.
If you have any questions about this process, please let me know.
From 3f9bce7a22a3f8ac9d885c9d75bc45569f24ac8b Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <[email protected]>
Date: Sat, 14 Nov 2020 19:39:05 +0100
Subject: iio: imu: st_lsm6dsx: fix edge-trigger interrupts
If we are using edge IRQs, new samples can arrive while processing current interrupt since there are no hw guarantees the irq line stays "low" long enough to properly detect the new interrupt. In this case the new sample will be missed.
Polling FIFO status register in st_lsm6dsx_handler_thread routine allow us to read new samples even if the interrupt arrives while processing previous data and the timeslot where the line is "low" is too short to be properly detected.
--- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 ++++++++++++++++---- 1 file changed, 21 insertions(+), 5 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +21 -5
@@ -2069,19 +2069,35 @@ st_lsm6dsx_report_motion_event(struct st_lsm6dsx_hw *hw)static irqreturn_t st_lsm6dsx_handler_thread (int irq,void *private) {struct st_lsm6dsx_hw *hw = private; +int fifo_len =0 , len;bool event; -int count; event =st_lsm6dsx_report_motion_event (hw);if (!hw->settings->fifo_ops.read_fifo)return event ?IRQ_HANDLED :IRQ_NONE ; -mutex_lock (&hw->fifo_lock); - count = hw->settings->fifo_ops.read_fifo (hw); -mutex_unlock (&hw->fifo_lock); +/* +* If we are using edge IRQs, new samples can arrive while +* processing current interrupt since there are no hw +* guarantees the irq line stays "low" long enough to properly +* detect the new interrupt. In this case the new sample will +* be missed. +* Polling FIFO status register allow us to read new +* samples even if the interrupt arrives while processing +* previous data and the timeslot where the line is "low" is +* too short to be properly detected. +*/ +do { +mutex_lock (&hw->fifo_lock); + len = hw->settings->fifo_ops.read_fifo (hw); +mutex_unlock (&hw->fifo_lock); + +if (len >0 ) + fifo_len += len; + }while (len >0 ); -return count || event ?IRQ_HANDLED :IRQ_NONE ; +return fifo_len || event ?IRQ_HANDLED :IRQ_NONE ; }static int st_lsm6dsx_irq_setup (struct st_lsm6dsx_hw *hw)
Signature · 1 line
2.29.2