FAILED: patch "[PATCH] i2c: imx: Check for I2SR_IAL after every byte" failed to apply to 4.9-stable tree

The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 1de67a3dee7a279ebe4d892b359fe3696938ec15 Mon Sep 17 00:00:00 2001
From: Christian Eggers <[email protected]>
Date: Fri, 9 Oct 2020 13:03:19 +0200
Subject: [PATCH] i2c: imx: Check for I2SR_IAL after every byte

Arbitration Lost (IAL) can happen after every single byte transfer. If arbitration is lost, the I2C hardware will autonomously switch from master mode to slave. If a transfer is not aborted in this state, consecutive transfers will not be executed by the hardware and will timeout.

Tested (not extensively) on Vybrid VF500 (Toradex VF50):

index 39e98d216016..a2abae124342 100644
@@ -490,6 +490,16 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic)
 		dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
 		return -ETIMEDOUT;
 	}
+
+	/* check for arbitration lost */
+	if (i2c_imx->i2csr & I2SR_IAL) {
+		dev_dbg(&i2c_imx->adapter.dev, "<%s> Arbitration lost\n", __func__);
+		i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
+
+		i2c_imx->i2csr = 0;
+		return -EAGAIN;
+	}
+
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
 	i2c_imx->i2csr = 0;
 	return 0;