mtd: rawnand: cortina_nand: Add Cortina CAxxxx SoC support
Subsystems (3)
PATCH v2 1/2 mtd: rawnand: cortina_nand: Add Cortina CAxxxx SoC support
From: Kate Liu <[email protected]>
Add Cortina Access parallel Nand support for CAxxxx SOCs
---
Changes in v2:
- Cleanup nand_ctrl struct offset comments
MAINTAINERS | 2 + drivers/mtd/nand/raw/Kconfig | 12 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/cortina_nand.c | 1390 +++++++++++++++++++++++++++++++++++ drivers/mtd/nand/raw/cortina_nand.h | 293 ++++++++ 5 files changed, 1698 insertions(+) create mode 100644 drivers/mtd/nand/raw/cortina_nand.c create mode 100644 drivers/mtd/nand/raw/cortina_nand.h
MAINTAINERS +2 -0
@@ -197,6 +197,8 @@ F: drivers/led/led_cortina.c F: drivers/mmc/ca_dw_mmc.c F: drivers/i2c/i2c-cortina.c F: drivers/i2c/i2c-cortina.h +F: drivers/mtd/nand/raw/cortina_nand.c +F: drivers/mtd/nand/raw/cortina_nand.h ARM/CZ.NIC TURRIS MOX SUPPORT M: Marek Behun <[email protected]>
drivers/mtd/nand/raw/Kconfig +12 -0
@@ -321,6 +321,18 @@ config NAND_STM32_FMC2 The controller supports a maximum 8k page size and supports a maximum 8-bit correction error per sector of 512 bytes. +config CORTINA_NAND + bool "Support for NAND controller on Cortina-Access SoCs" + depends on CORTINA_PLATFORM + select SYS_NAND_SELF_INIT + select DM_MTD + imply CMD_NAND + help + Enables support for NAND Flash chips on Coartina-Access SoCs platform + This controller is found on Presidio/Venus SoCs. + The controller supports a maximum 8k page size and supports + a maximum 40-bit error correction per sector of 1024 bytes. + comment "Generic NAND options" config SYS_NAND_BLOCK_SIZE
drivers/mtd/nand/raw/Makefile +1 -0
@@ -69,6 +69,7 @@ obj-$(CONFIG_NAND_PLAT) += nand_plat.o obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o obj-$(CONFIG_NAND_STM32_FMC2) += stm32_fmc2_nand.o +obj-$(CONFIG_CORTINA_NAND) += cortina_nand.o else # minimal SPL drivers
drivers/mtd/nand/raw/cortina_nand.c new file +1390 -0
1,390 lines not on this page · raw message
drivers/mtd/nand/raw/cortina_nand.h new file +293 -0
293 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 2/2 board: presidio: Add Parallel NAND support
From: Kate Liu <[email protected]>
Set environment for Nand flash (U-boot 2020.04):
- add nand flash in the device tree
- add new default configuration file for G3 using parallel Nand
- set nand parameters in presidio_asic.h
---
Changes in v2:
- auto generate defconfig with savedefconfig
MAINTAINERS | 1 + arch/arm/dts/ca-presidio-engboard.dts | 14 ++++++++++++ configs/cortina_presidio-asic-pnand_defconfig | 33 +++++++++++++++++++++++++++ include/configs/presidio_asic.h | 9 ++++++++ 4 files changed, 57 insertions(+) create mode 100644 configs/cortina_presidio-asic-pnand_defconfig
MAINTAINERS +1 -0
@@ -199,6 +199,7 @@ F: drivers/i2c/i2c-cortina.c F: drivers/i2c/i2c-cortina.h F: drivers/mtd/nand/raw/cortina_nand.c F: drivers/mtd/nand/raw/cortina_nand.h +F: configs/cortina_presidio-asic-pnand_defconfig ARM/CZ.NIC TURRIS MOX SUPPORT M: Marek Behun <[email protected]>
arch/arm/dts/ca-presidio-engboard.dts +14 -0
@@ -52,6 +52,20 @@ clock-frequency = <400000>; }; + nand: nand-controller at f4324000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cortina,ca-nand"; + reg = <0 0xf4324000 0x3b0>, /* NAND controller */ + <0 0xf7001000 0xb4>, /* DMA_GLOBAL */ + <0 0xf7001a00 0x80>; /* DMA channel0 for FLASH */ + status = "okay"; + nand-ecc-mode = "hw"; + nand-ecc-strength = <16>; + nand-ecc-step-size = <1024>; /* Must be 1024 */ + nand_flash_base_addr = <0xe0000000>; + }; + sflash: sflash-controller at f4324000 { #address-cells = <2>; #size-cells = <1>;
configs/cortina_presidio-asic-pnand_defconfig new file +33 -0
@@ -0,0 +1,33 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x20000 +CONFIG_DM_GPIO=y +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="earlycon=serial,0xf4329148 console=ttyS0,115200 root=/dev/ram0" +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_MTD=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_CORTINA_NAND=y +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y
include/configs/presidio_asic.h +9 -0
@@ -67,4 +67,13 @@#define CONFIG_SYS_MAXARGS 64#define CONFIG_EXTRA_ENV_SETTINGS "silent=y\0" +/* nand driver parameters */ +#ifdef CONFIG_TARGET_PRESIDIO_ASIC +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#endif +#endif /* __PRESIDIO_ASIC_H */
Signature · 1 line
2.7.4
PATCH v2 2/2 board: presidio: Add Parallel NAND support
Quoted 11 lines · Alex Nemirovsky
From: Kate Liu <[email protected]>
Set environment for Nand flash (U-boot 2020.04):
- add nand flash in the device tree
- add new default configuration file for G3 using parallel Nand
- set nand parameters inpresidio_asic.hSigned-off-by Kate Liu <[email protected]>Signed-off-by Alex Nemirovsky <[email protected]>CC Tom Rini <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201212/4318b483/attachment.sig>
PATCH v2 2/2 board: presidio: Add Parallel NAND support
In reply to Alex NemirovskyQuoted 11 lines · Alex Nemirovsky
From: Kate Liu <[email protected]>
Set environment for Nand flash (U-boot 2020.04):
- add nand flash in the device tree
- add new default configuration file for G3 using parallel Nand
- set nand parameters inpresidio_asic.hSigned-off-by Kate Liu <[email protected]>Signed-off-by Alex Nemirovsky <[email protected]>CC Tom Rini <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210119/833204aa/attachment.sig>
PATCH v2 1/2 mtd: rawnand: cortina_nand: Add Cortina CAxxxx SoC support
In reply to Alex NemirovskyQuoted 9 lines · Alex Nemirovsky
From: Kate Liu <[email protected]>
Add Cortina Access parallel Nand support for CAxxxx SOCs
Signed-off-by Kate Liu <[email protected]>Signed-off-by Alex Nemirovsky <[email protected]>CC Tom Rini <[email protected]>CC Scott Wood <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201212/3003b7da/attachment.sig>
PATCH v2 1/2 mtd: rawnand: cortina_nand: Add Cortina CAxxxx SoC support
In reply to Alex NemirovskyQuoted 9 lines · Alex Nemirovsky
From: Kate Liu <[email protected]>
Add Cortina Access parallel Nand support for CAxxxx SOCs
Signed-off-by Kate Liu <[email protected]>Signed-off-by Alex Nemirovsky <[email protected]>CC Tom Rini <[email protected]>CC Scott Wood <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210119/6de7aba6/attachment.sig>