Skip to contentSkip to conversation

clk: qcom: gcc-sc7180: Mark the camera abh clock always ON

PATCH Applied Taniya Das 2 participants 2 messages Dec 21, 2020 – Jan 12, 2021

Subsystems (3)
lore
Share & tools
lore

Taniya Das

author
#0 lore raw

PATCH 1/1 clk: qcom: gcc-sc7180: Mark the camera abh clock always ON

The camera clock controller requires the AHB clock, the driver when moved to use the pm_runtime_get() API, the camera ahb clock failed turn on before access, thus mark it as always ON.

Fixes 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
---
 drivers/clk/qcom/gcc-sc7180.c | 21 +++------------------
 1 file changed, 3 insertions(+), 18 deletions(-)
drivers/clk/qcom/gcc-sc7180.c +3 -18
index d82d725..b05901b 100644
@@ -891,21 +891,6 @@ static struct clk_branch gcc_boot_rom_ahb_clk = {
 	},
 };
 
-static struct clk_branch gcc_camera_ahb_clk = {
-	.halt_reg = 0xb008,
-	.halt_check = BRANCH_HALT,
-	.hwcg_reg = 0xb008,
-	.hwcg_bit = 1,
-	.clkr = {
-		.enable_reg = 0xb008,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "gcc_camera_ahb_clk",
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gcc_camera_hf_axi_clk = {
 	.halt_reg = 0xb020,
 	.halt_check = BRANCH_HALT,
@@ -2317,7 +2302,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GCC_AGGRE_UFS_PHY_AXI_CLK] = &gcc_aggre_ufs_phy_axi_clk.clkr,
 	[GCC_AGGRE_USB3_PRIM_AXI_CLK] = &gcc_aggre_usb3_prim_axi_clk.clkr,
 	[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
-	[GCC_CAMERA_AHB_CLK] = &gcc_camera_ahb_clk.clkr,
 	[GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
 	[GCC_CAMERA_THROTTLE_HF_AXI_CLK] = &gcc_camera_throttle_hf_axi_clk.clkr,
 	[GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
@@ -2519,11 +2503,12 @@ static int gcc_sc7180_probe(struct platform_device *pdev)
 
 	/*
 	 * Keep the clocks always-ON
-	 * GCC_CPUSS_GNOC_CLK, GCC_VIDEO_AHB_CLK, GCC_DISP_AHB_CLK
-	 * GCC_GPU_CFG_AHB_CLK
+	 * GCC_CPUSS_GNOC_CLK, GCC_VIDEO_AHB_CLK, GCC_CAMERA_AHB_CLK,
+	 * GCC_DISP_AHB_CLK, GCC_GPU_CFG_AHB_CLK
 	 */
 	regmap_update_bits(regmap, 0x48004, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
 

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.

maintainer Applied
#1 lore raw

Quoting Taniya Das (2020-12-21 10:03:36)

Quoted 8 lines

The camera clock controller requires the AHB clock, the driver when moved to use the pm_runtime_get() API, the camera ahb clock failed turn on before access, thus mark it as always ON.

Fixes 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")

---

Applied to clk-fixes