patch "usb: gadget: aspeed: fix stop dma register setting." added to usb-linus

This is a note to let you know that I've just added the patch titled

usb: gadget: aspeed: fix stop dma register setting.

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From 4e0dcf62ab4cf917d0cbe751b8bf229a065248d4 Mon Sep 17 00:00:00 2001
From: Ryan Chen <[email protected]>
Date: Fri, 8 Jan 2021 16:12:38 +0800
Subject: usb: gadget: aspeed: fix stop dma register setting.

The vhub engine has two dma mode, one is descriptor list, another is single stage DMA. Each mode has different stop register setting. Descriptor list operation (bit2) : 0 disable reset, 1: enable reset Single mode operation (bit0) : 0 : disable, 1: enable

---
 drivers/usb/gadget/udc/aspeed-vhub/epn.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

index 0bd6b20435b8..02d8bfae58fb 100644
@@ -420,7 +420,10 @@ static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep,
 	u32 state, reg, loops;
 
 	/* Stop DMA activity */
-	writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	if (ep->epn.desc_mode)
+		writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	else
+		writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 
 	/* Wait for it to complete */
 	for (loops = 0; loops < 1000; loops++) {

2.30.0