Skip to contentSkip to conversation

ath11k: Fix sounding dimension config in HE cap

PATCH In review Lavanya Suresh 2 participants 3 messages Feb 16, 2021 – Feb 18, 2021 Qualcomm Atheros ATH11K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ath11k: Fix sounding dimension config in HE cap

Number of Sounding dimensions config received from firmware for bandwidth above 80MHz is cleared, and proper value is not set again. So not resetting it to accept the config from firmware.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01689-QCAHKSWPL_SILICONZ-1

---
 drivers/net/wireless/ath/ath11k/mac.c | 2 --
 1 file changed, 2 deletions(-)
drivers/net/wireless/ath/ath11k/mac.c +0 -2
index 5e5026c..61c166e 100644
@@ -4604,8 +4604,6 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar,
 
 		he_cap_elem->phy_cap_info[5] &=
 			~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK;
-		he_cap_elem->phy_cap_info[5] &=
-			~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK;
 		he_cap_elem->phy_cap_info[5] |= ar->num_tx_chains - 1;
 
 		switch (i) {
Signature · 7 lines
2.7.4


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#1 lore raw
Quoted 8 lines · Lavanya Suresh

Number of Sounding dimensions config received from firmware for bandwidth above 80MHz is cleared, and proper value is not set again. So not resetting it to accept the config from firmware.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01689-QCAHKSWPL_SILICONZ-1

Patch applied to ath-next branch of ath.git, thanks.

096b625fab8f ath11k: Fix sounding dimension config in HE cap

Signature · 9 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#2 lore raw
In reply to Lavanya Suresh
Quoted 8 lines · Lavanya Suresh

Number of Sounding dimensions config received from firmware for bandwidth above 80MHz is cleared, and proper value is not set again. So not resetting it to accept the config from firmware.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01689-QCAHKSWPL_SILICONZ-1

Patch applied to ath-next branch of ath.git, thanks.

096b625fab8f ath11k: Fix sounding dimension config in HE cap

Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches