Skip to contentSkip to conversation

FAILED: patch "[PATCH] regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3" failed to apply to 5.11-stable tree

PATCH [email protected] 1 participant 1 message Mar 13, 2021

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.11-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 98b94b6e38ca0c4eeb29949c656f6a315000c23e Mon Sep 17 00:00:00 2001
From: Frieder Schrempf <[email protected]>
Date: Mon, 22 Feb 2021 12:52:20 +0100
Subject: [PATCH] regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3
voltage setting

The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the voltage for the buck regulators 1, 2 and 3. This has no effect as the PRESET_EN bit is set by default and therefore the preset values are used instead, which are set to 850 mV.

To fix this we clear the PRESET_EN bit at time of initialization.

Fixes 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
drivers/regulator/pca9450-regulator.c +8 -0
index 89b806be399f..2f7ee212cb8c 100644
@@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	/* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */
+	ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS,
+				BUCK123_PRESET_EN);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret);
+		return ret;
+	}
+
 	/* Set reset behavior on assertion of WDOG_B signal */
 	ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
 				WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);
include/linux/regulator/pca9450.h +3 -0
index ccdb5320a240..71902f41c919 100644
@@ -147,6 +147,9 @@ enum {
 #define BUCK6_FPWM			0x04
 #define BUCK6_ENMODE_MASK		0x03
 
+/* PCA9450_REG_BUCK123_PRESET_EN bit */
+#define BUCK123_PRESET_EN		0x80
+
 /* PCA9450_BUCK1OUT_DVS0 bits */
 #define BUCK1OUT_DVS0_MASK		0x7F
 #define BUCK1OUT_DVS0_DEFAULT		0x14