arm64: tegra: Move clocks from RT5658 endpoint to device node
Subsystems (2)
PATCH v2 1/1 arm64: tegra: Move clocks from RT5658 endpoint to device node
An endpoint is not a device and it is recommended to use clocks property in device node. RT5658 Codec binding already specifies the usage of clocks property. Thus move the clocks from endpoint to device node.
Fixes 5b4f6323096a ("arm64: tegra: Audio graph sound card for Jetson AGX Xavier")
Suggested-by Rob Herring <[email protected]>
Signed-off-by Sameer Pujar <[email protected]>
---
Changelog:
v1 -> v2: Added "clock-names" property as rt5659 driver specifically looks
for this clock name.
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +2 -1
@@ -651,6 +651,8 @@ reg = <0x1a>; interrupt-parent = <&gpio>; interrupts = <TEGRA194_MAIN_GPIO(S, 5) GPIO_ACTIVE_HIGH>; + clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>; + clock-names = "mclk"; realtek,jd-src = <2>; sound-name-prefix = "CVB-RT";
@@ -658,7 +660,6 @@ rt5658_ep: endpoint { remote-endpoint = <&i2s1_dap_ep>; mclk-fs = <256>; - clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>; }; }; };
Signature · 1 line
2.7.4