tests/i915_pm_rpm: Add suspend-resume-latency test
RFC 1/1 tests/i915_pm_rpm: Add suspend-resume-latency test
Measuring the suspend-resume time using tracefs, writing Suspend Started, Suspend Completed, Resume Ended timestamp into tracefs file. After writing it's reading from tracefs file and measuring different, suspend and resume , individual must be less than 1 sec.
--- tests/i915/i915_pm_rpm.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)
tests/i915/i915_pm_rpm.c +81 -0
@@ -1998,6 +1998,83 @@ static int opt_handler(int opt, int opt_index, void *data)return IGT_OPT_HANDLER_SUCCESS ; } +static void dpms_off (struct mode_set_data *data) +{ +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; +kmstest_set_connector_dpms (drm_fd, c,DRM_MODE_DPMS_OFF ); + } +} +static void dpms_on (struct mode_set_data *data) +{ +igt_display_t display; + +igt_display_require (&display, drm_fd); +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; +kmstest_set_connector_dpms (drm_fd, c,DRM_MODE_DPMS_ON ); + } + +} + +static uint32_t get_trace_timestamp (char *dc_data) +{ +char *e; +long ret; +char *s =strchr (dc_data,':' ); + +assert (s); + s++; + ret =strtol (s, &e,10 ); +assert (((ret !=LONG_MIN && ret !=LONG_MAX ) || errno !=ERANGE ) && + e > s && *e =='\n' && ret >=0 ); +return ret; +} + +static long int get_timestamp (void ) +{ +struct timespec start; + +clock_gettime (CLOCK_MONOTONIC_RAW , &start); +return ( start.tv_sec *1000000 + (start.tv_nsec /1000 )); +} + +static void read_trace (void ) +{ +int fd; +char buf[4096 ]; + + fd=open ("/sys/kernel/debug/tracing/trace" ,O_RDONLY ); +igt_assert (fd>0 ); +igt_assert (read (fd, buf,sizeof (buf))); +igt_assert (((float )(get_trace_timestamp (strstr (buf,"Suspend_Completed" )) - +get_trace_timestamp (strstr (buf,"Suspend_Started" )))/1000000 )<2 ); +igt_assert (((float )(get_trace_timestamp (strstr (buf,"Resume_Ended" )) - +get_trace_timestamp (strstr (buf,"Suspend_Completed" )))/1000000 )<1 ); +close (fd); +} + +static void test_suspend_resume_latency (struct mode_set_data *data) +{ +int fd; +char msg[400 ]; + + fd=open ("/sys/kernel/debug/tracing/trace_marker" ,O_WRONLY ); +igt_assert (fd>0 ); +snprintf (msg,100 ,"Suspend_Started : %ld" ,get_timestamp ()); +write (fd,msg,strlen (msg)); +dpms_off (data); +igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_SUSPENDED )); +snprintf (msg,100 ,"Suspend_Completed : %ld" ,get_timestamp ()); +write (fd,msg,strlen (msg)); +dpms_on (data); +igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_ACTIVE )); +snprintf (msg,100 ,"Resume_Ended : %ld" ,get_timestamp ()); +write (fd,msg,strlen (msg)); +close (fd); +read_trace (); +} +const char *help_str =" --stress\t\tMake the stress-tests more stressful.\n" " --stay\t\tDisable all screen and try to go into runtime pm. Useful for debugging." ;
@@ -2147,6 +2224,10 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)pm_test_caching (); } + igt_subtest("suspend-resume-latency") { +test_suspend_resume_latency (&ms_data); + } +igt_fixture teardown_environment (false );
Signature · 6 lines
2.8.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.BUILD: failure for tests/i915_pm_rpm: Add suspend-resume-latency test
== Series Details ==
== Series Details ==
Series: tests/i915_pm_rpm: Add suspend-resume-latency test
URL : https://patchwork.freedesktop.org/series/88377/
State : failure
== Summary ==
IGT patchset build failed on latest successful build 2c2fc6470646eb5e25fc6ea02449ef744f8b70c2 tests/kms_addfb_basic: simplify addfb25_ytile tests
[286/423] Linking target tests/gem_softpin.
[287/423] Linking target tests/gem_tiled_blits.
[288/423] Linking target tests/gem_sync.
[289/423] Linking target tests/gem_spin_batch.
[290/423] Linking target tests/gem_streaming_writes.
[291/423] Linking target tests/gem_tiled_fence_blits.
[292/423] Linking target tests/gem_tiled_partial_pwrite_pread.
[293/423] Linking target tests/gem_tiled_pread_pwrite.
[294/423] Linking target tests/gem_tiled_pread_basic.
[295/423] Linking target tests/gem_tiled_wc.
[296/423] Linking target tests/gem_tiled_swapping.
[297/423] Linking target tests/gem_tiled_wb.
[298/423] Linking target tests/gem_unref_active_buffers.
[299/423] Linking target tests/gem_tiling_max_stride.
[300/423] Linking target tests/gem_unfence_active_buffers.
[301/423] Linking target tests/gem_userptr_blits.
[302/423] Linking target tests/i915_fb_tiling.
[303/423] Linking target tests/gem_vm_create.
[304/423] Linking target tests/gem_wait.
[305/423] Linking target tests/gem_workarounds.
[306/423] Linking target tests/i915_getparams_basic.
[307/423] Linking target tests/i915_hangman.
[308/423] Linking target tests/i915_module_load.
[309/423] Linking target tests/i915_pm_lpsp.
[310/423] Linking target tests/i915_pciid.
[311/423] Linking target tests/i915_pm_backlight.
[312/423] Compiling C object 'tests/tests@@i915_pm_rpm@exe/i915_i915_pm_rpm.c.o'.
FAILED: tests/tests@@i915_pm_rpm@exe/i915_i915_pm_rpm.c.o
ccache cc -Itests/tests@@i915_pm_rpm@exe -Itests -I../tests -I../include/drm-uapi -Ilib -I../lib -I../lib/stubs/syscalls -I. -I../ -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/libpng16 -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/libdrm -I/usr/include/x86_64-linux-gnu -I/usr/include/alsa -I/usr/include -I/usr/include/libdrm/nouveau -I/home/cidrm/kernel_headers/include -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -std=gnu11 -O2 -g -D_GNU_SOURCE -include config.h -D_FORTIFY_SOURCE=2 -Wbad-function-cast -Wdeclaration-after-statement -Wformat=2 -Wimplicit-fallthrough=0 -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wmissing-noreturn -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpointer-arith -Wredundant-decls -Wshadow -Wstrict-prototypes -Wuninitialized -Wunused -Wno-clobbered -Wno-maybe-uninitialized -Wno-missing-field-initializers -Wno-pointer-arith -Wno-sign-compare -Wno-type-limits -Wno-unused-parameter -Wno-unused-result -Werror=address -Werror=array-bounds -Werror=implicit -Werror=init-self -Werror=int-to-pointer-cast -Werror=main -Werror=missing-braces -Werror=nonnull -Werror=pointer-to-int-cast -Werror=return-type -Werror=sequence-point -Werror=trigraphs -Werror=write-strings -fno-builtin-malloc -fno-builtin-calloc -fcommon -pthread -MD -MQ 'tests/tests@@i915_pm_rpm@exe/i915_i915_pm_rpm.c.o' -MF 'tests/tests@@i915_pm_rpm@exe/i915_i915_pm_rpm.c.o.d' -o 'tests/tests@@i915_pm_rpm@exe/i915_i915_pm_rpm.c.o' -c ../tests/i915/i915_pm_rpm.c In file included from /usr/include/alsa/asoundlib.h:37,
from ../lib/igt_alsa.h:32,
from ../lib/igt.h:44,
from ../tests/i915/i915_pm_rpm.c:49:
../tests/i915/i915_pm_rpm.c: In function ‘get_trace_timestamp’:
../tests/i915/i915_pm_rpm.c:2026:25: error: ‘LONG_MIN’ undeclared (first use in this function)
assert(((ret != LONG_MIN && ret != LONG_MAX) || errno != ERANGE) &&
^~~~~~~~../tests/i915/i915_pm_rpm.c:2026:25: note: ‘LONG_MIN’ is defined in header ‘<limits.h>’; did you forget to ‘#include <limits.h>’? ../tests/i915/i915_pm_rpm.c:55:1:
+#include <limits.h>
../tests/i915/i915_pm_rpm.c:2026:25:
assert(((ret != LONG_MIN && ret != LONG_MAX) || errno != ERANGE) &&
^~~~~~~~
../tests/i915/i915_pm_rpm.c:2026:25: note: each undeclared identifier is reported only once for each function it appears in
../tests/i915/i915_pm_rpm.c:2026:44: error: ‘LONG_MAX’ undeclared (first use in this function)
assert(((ret != LONG_MIN && ret != LONG_MAX) || errno != ERANGE) &&
^~~~~~~~../tests/i915/i915_pm_rpm.c:2026:44: note: ‘LONG_MAX’ is defined in header ‘<limits.h>’; did you forget to ‘#include <limits.h>’?
ninja: build stopped: subcommand failed.
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
RFC 1/1 tests/i915_pm_rpm: Add suspend-resume-latency test
In reply to Jigar BhattMeasuring the suspend-resume time using tracefs, writing Suspend Started, Suspend Completed, Resume Ended timestamp into tracefs file. After writing it's reading from tracefs file and measuring different, suspend and resume , individual must be less than 1 sec.
v1:
- Add limits.h and time.h
--- tests/i915/i915_pm_rpm.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+)
tests/i915/i915_pm_rpm.c +86 -0
@@ -53,6 +53,8 @@#include "igt_debugfs.h" #include "igt_device.h" #include "igt_edid.h" +#include "limits.h" +#include "time.h" #define MSR_PC8_RES 0x630#define MSR_PC9_RES 0x631
@@ -1998,6 +2000,85 @@ static int opt_handler(int opt, int opt_index, void *data)return IGT_OPT_HANDLER_SUCCESS ; } +static void dpms_off (struct mode_set_data *data) +{ +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + +kmstest_set_connector_dpms (drm_fd, c,DRM_MODE_DPMS_OFF ); + } +} + +static void dpms_on (struct mode_set_data *data) +{ +igt_display_t display; + +igt_display_require (&display, drm_fd); +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + +kmstest_set_connector_dpms (drm_fd, c,DRM_MODE_DPMS_ON ); + } +} + +static uint32_t get_trace_timestamp (char *dc_data) +{ +char *e; +long ret; +char *s =strchr (dc_data,':' ); + +assert (s); + s++; + ret =strtol (s, &e,10 ); +assert (((ret !=LONG_MIN && ret !=LONG_MAX ) || errno !=ERANGE ) && + e > s && *e =='\n' && ret >=0 ); +return ret; +} + +static long get_timestamp (void ) +{ +struct timespec start; + +clock_gettime (CLOCK_MONOTONIC_RAW , &start); +return (start.tv_sec *1000000 + (start.tv_nsec /1000 )); +} + +static void read_trace (void ) +{ +int fd; +char buf[4096 ]; + + fd =open ("/sys/kernel/debug/tracing/trace" ,O_RDONLY ); +igt_assert (fd >0 ); +igt_assert (read (fd, buf,sizeof (buf))); +igt_assert (((float )(get_trace_timestamp (strstr (buf,"Suspend_Completed" )) - +get_trace_timestamp (strstr (buf,"Suspend_Started" ))) /1000000 ) <1 ); +igt_assert (((float )(get_trace_timestamp (strstr (buf,"Resume_Ended" )) - +get_trace_timestamp (strstr (buf,"Suspend_Completed" ))) /1000000 ) <1 ); +close (fd); +} + +static void test_suspend_resume_latency (struct mode_set_data *data) +{ +int fd; +char msg[400 ]; + + fd =open ("/sys/kernel/debug/tracing/trace_marker" ,O_WRONLY ); +igt_assert (fd >0 ); +snprintf (msg,100 ,"Suspend_Started : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_off (data); +igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_SUSPENDED )); +snprintf (msg,100 ,"Suspend_Completed : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_on (data); +igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_ACTIVE )); +snprintf (msg,100 ,"Resume_Ended : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +close (fd); +read_trace (); +} +const char *help_str =" --stress\t\tMake the stress-tests more stressful.\n" " --stay\t\tDisable all screen and try to go into runtime pm. Useful for debugging." ;
@@ -2147,6 +2228,11 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)pm_test_caching (); } + igt_subtest("suspend-resume-latency") { +test_suspend_resume_latency (&ms_data); + } + +igt_fixture teardown_environment (false );
Signature · 6 lines
2.8.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 6 lines · Jigar Bhatt
Measuring the suspend-resume time using tracefs, writing Suspend Started, Suspend Completed, Resume Ended timestamp into tracefs file. After writing it's reading from tracefs file and measuring different, suspend and resume , individual must be less than 1 sec.
Ahhhh, finally someone got to it! Thanks so much for this, as I was feeling bad for not having had the time to write it myself...
Comments are inlined!
Quoted 58 lines
v1:
- Addlimits.handtime.hSigned-off-by Jigar Bhatt <[email protected]>--- tests/i915/i915_pm_rpm.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+)tests/i915/i915_pm_rpm.c +34
-0@@ -53,6 +53,8 @@#include "igt_debugfs.h" #include "igt_device.h" #include "igt_edid.h" +#include "limits.h" +#include "time.h" #define MSR_PC8_RES 0x630#define MSR_PC9_RES 0x631@@ -1998,6 +2000,85 @@ static int opt_handler(int opt, int opt_index, void *data)return IGT_OPT_HANDLER_SUCCESS ; } +static void dpms_off (struct mode_set_data *data) +{ +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + +kmstest_set_connector_dpms (drm_fd, c,DRM_MODE_DPMS_OFF ); + } +} + +static void dpms_on (struct mode_set_data *data) +{ +igt_display_t display; + +igt_display_require (&display, drm_fd); +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + +kmstest_set_connector_dpms (drm_fd, c,DRM_MODE_DPMS_ON ); + } +} + +static uint32_t get_trace_timestamp (char *dc_data) +{ +char *e; +long ret; +char *s =strchr (dc_data,':' ); + +assert (s); + s++; + ret =strtol (s, &e,10 ); +assert (((ret !=LONG_MIN && ret !=LONG_MAX ) || errno !=ERANGE ) && + e > s && *e == '\n' && ret >= 0);it is impossible to know from the userspace how long it will take for the machine to go to sleep
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2044
Quoted 10 lines
tests/i915/i915_pm_rpm.c +10
-0+return ret; +} + +static long get_timestamp (void ) +{ +struct timespec start; + +clock_gettime (CLOCK_MONOTONIC_RAW , &start); +return (start.tv_sec *1000000 + (start.tv_nsec /1000 )); +}
By using a monotonic clock, you are measuring the kernel overhead of going to sleep and resuming, and not the time spent off.
I think you need to explain why you are using it in the commit message (we assume the firmware is basically immediate, as measuring anything there is trickyMartin and measuring the wall time is tricky due to unreliable RTC clocks, and the inability to start the wake up milliseconds after suspend without a kernel patch).
Quoted 26 lines
tests/i915/i915_pm_rpm.c +26
-0+ +static void read_trace (void ) +{ +int fd; +char buf[4096 ]; + + fd =open ("/sys/kernel/debug/tracing/trace" ,O_RDONLY ); +igt_assert (fd >0 ); +igt_assert (read (fd, buf,sizeof (buf))); +igt_assert (((float )(get_trace_timestamp (strstr (buf,"Suspend_Completed" )) - +get_trace_timestamp (strstr (buf,"Suspend_Started" ))) /1000000 ) <1 ); +igt_assert (((float )(get_trace_timestamp (strstr (buf,"Resume_Ended" )) - +get_trace_timestamp (strstr (buf,"Suspend_Completed" ))) /1000000 ) <1 ); +close (fd); +} + +static void test_suspend_resume_latency (struct mode_set_data *data) +{ +int fd; +char msg[400 ]; + + fd =open ("/sys/kernel/debug/tracing/trace_marker" ,O_WRONLY ); +igt_assert (fd >0 ); +snprintf (msg,100 ,"Suspend_Started : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_off (data);
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2080
Quoted 10 lines
tests/i915/i915_pm_rpm.c +10
-0+igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_SUSPENDED )); +snprintf (msg,100 ,"Suspend_Completed : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_on (data); +igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_ACTIVE )); +snprintf (msg,100 ,"Resume_Ended : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +close (fd); +read_trace (); +}
Why do you change the DPMS state during the state? Wouldn't you want to have two tests: one with dpms on, and one with dpms off?
Martin
Quoted 7 lines
tests/i915/i915_pm_rpm.c +1
-0+const char *help_str =" --stress\t\tMake the stress-tests more stressful.\n" " --stay\t\tDisable all screen and try to go into runtime pm. Useful for debugging." ;@@ -2147,6 +2228,11 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)pm_test_caching ();
tests/i915/i915_pm_rpm.c igt_main_args("", long_options, help_str, opt_handler, NULL) · line 2238
Quoted 10 lines
tests/i915/i915_pm_rpm.c +5
-0} + igt_subtest("suspend-resume-latency") { +test_suspend_resume_latency (&ms_data); + } + +igt_fixture teardown_environment (false );
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Hi Martin,
Thanks for commenting and reading.
Yes I am measuring the kernel overhead of going to sleep and resuming. Surely I will mention in commit. After suspend it's taking time in IGT around 0.5 ms. Suspend is fast.
two tests: one with dpms on, and one with dpms off,
earlier it is in single flow but yes that's better idea to separate and measure timing.
Thanks and Regards,
Jigar Bhatt
-----Original Message-----
From: Martin Peres <[email protected]>
Sent: Thursday, March 25, 2021 12:53 PM
To: Bhatt, Jigar <[email protected]>; [email protected]
Subject: Re: [igt-dev] [i-g-t RFC v1] tests/i915_pm_rpm: Add suspend-resume-latency test
Quoted 4 lines · Jigar Bhatt
Measuring the suspend-resume time using tracefs, writing Suspend Started, Suspend Completed, Resume Ended timestamp into tracefs file. After writing it's reading from tracefs file and measuring different, suspend and resume , individual must be less than 1 sec.
Ahhhh, finally someone got to it! Thanks so much for this, as I was feeling bad for not having had the time to write it myself...
Comments are inlined!
Quoted 54 lines
v1:
- Addlimits.handtime.hSigned-off-by Jigar Bhatt <[email protected]>--- tests/i915/i915_pm_rpm.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+)tests/i915/i915_pm_rpm.c index renamed from tests/i915/i915_pm_rpm.c +0
-0694a3ea..3cc9259 100644
tests/i915/i915_pm_rpm.c +30
-0@@ -53,6 +53,8 @@#include "igt_debugfs.h" #include "igt_device.h" #include "igt_edid.h" +#include "limits.h" +#include "time.h" #define MSR_PC8_RES 0x630#define MSR_PC9_RES 0x631@@ -1998,6 +2000,85 @@ static int opt_handler(int opt, int opt_index, void *data)return IGT_OPT_HANDLER_SUCCESS ; } +static void dpms_off (struct mode_set_data *data) { +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + +kmstest_set_connector_dpms (drm_fd, c,DRM_MODE_DPMS_OFF ); + } +} + +static void dpms_on (struct mode_set_data *data) { +igt_display_t display; + +igt_display_require (&display, drm_fd); +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + +kmstest_set_connector_dpms (drm_fd, c,DRM_MODE_DPMS_ON ); + } +} + +static uint32_t get_trace_timestamp (char *dc_data) { +char *e; +long ret; +char *s =strchr (dc_data,':' ); + +assert (s); + s++; + ret =strtol (s, &e,10 ); + assert(((ret != LONG_MIN && ret != LONG_MAX) || errno != ERANGE) &&
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2040
Quoted 10 lines
tests/i915/i915_pm_rpm.c +10
-0+ e > s && *e == '\n' && ret >= 0);it is impossible to know from the userspace how long it will take for the machine to go to sleep +return ret; +} + +static long get_timestamp (void ) +{ +struct timespec start; + +clock_gettime (CLOCK_MONOTONIC_RAW , &start); +return (start.tv_sec *1000000 + (start.tv_nsec /1000 )); }
By using a monotonic clock, you are measuring the kernel overhead of going to sleep and resuming, and not the time spent off.
I think you need to explain why you are using it in the commit message (we assume the firmware is basically immediate, as measuring anything there is trickyMartin and measuring the wall time is tricky due to unreliable RTC clocks, and the inability to start the wake up milliseconds after suspend without a kernel patch).
Quoted 26 lines
tests/i915/i915_pm_rpm.c +26
-0+ +static void read_trace (void ) +{ +int fd; +char buf[4096 ]; + + fd =open ("/sys/kernel/debug/tracing/trace" ,O_RDONLY ); +igt_assert (fd >0 ); +igt_assert (read (fd, buf,sizeof (buf))); +igt_assert (((float )(get_trace_timestamp (strstr (buf,"Suspend_Completed" )) - +get_trace_timestamp (strstr (buf,"Suspend_Started" ))) /1000000 ) <1 ); +igt_assert (((float )(get_trace_timestamp (strstr (buf,"Resume_Ended" )) - +get_trace_timestamp (strstr (buf,"Suspend_Completed" ))) /1000000 ) <1 ); +close (fd); +} + +static void test_suspend_resume_latency (struct mode_set_data *data) +{ +int fd; +char msg[400 ]; + + fd =open ("/sys/kernel/debug/tracing/trace_marker" ,O_WRONLY ); +igt_assert (fd >0 ); +snprintf (msg,100 ,"Suspend_Started : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_off (data);
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2080
Quoted 10 lines
tests/i915/i915_pm_rpm.c +10
-0+igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_SUSPENDED )); +snprintf (msg,100 ,"Suspend_Completed : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_on (data); +igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_ACTIVE )); +snprintf (msg,100 ,"Resume_Ended : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +close (fd); +read_trace (); +}
Why do you change the DPMS state during the state? Wouldn't you want to have two tests: one with dpms on, and one with dpms off?
Martin
Quoted 7 lines
tests/i915/i915_pm_rpm.c +1
-0+const char *help_str =" --stress\t\tMake the stress-tests more stressful.\n" " --stay\t\tDisable all screen and try to go into runtime pm. Useful for debugging." ;@@ -2147,6 +2228,11 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)pm_test_caching ();
tests/i915/i915_pm_rpm.c igt_main_args("", long_options, help_str, opt_handler, NULL) · line 2238
Quoted 10 lines
tests/i915/i915_pm_rpm.c +5
-0} + igt_subtest("suspend-resume-latency") { +test_suspend_resume_latency (&ms_data); + } + +igt_fixture teardown_environment (false );
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 95 lines
-----Original Message-----
From: igt-dev <[email protected]> On Behalf Of Martin Peres
Sent: Thursday, March 25, 2021 12:53 PM
To: Bhatt, Jigar <[email protected]>; [email protected]
Subject: Re: [igt-dev] [i-g-t RFC v1] tests/i915_pm_rpm: Add suspend-resume- latency testQuoted 4 lines · Jigar Bhatt
Measuring the suspend-resume time using tracefs, writing Suspend Started, Suspend Completed, Resume Ended timestamp into tracefs file. After writing it's reading from tracefs file and measuring different, suspend and resume , individual must be less than 1 sec.
Ahhhh, finally someone got to it! Thanks so much for this, as I was feeling bad for not having had the time to write it myself...
Comments are inlined!
Quoted 7 lines
v1:
- Addlimits.handtime.hSigned-off-by Jigar Bhatt <[email protected]>--- tests/i915/i915_pm_rpm.c | 86++++++++++++++++++++++++++++++++++++++++++++++++
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void
Quoted 16 lines
1 file changed, 86 insertions(+)tests/i915/i915_pm_rpm.c index renamed from tests/i915/i915_pm_rpm.c +0
-0694a3ea..3cc9259 100644
tests/i915/i915_pm_rpm.c +2
-0@@ -53,6 +53,8 @@#include "igt_debugfs.h" #include "igt_device.h" #include "igt_edid.h" +#include "limits.h" +#include "time.h" #define MSR_PC8_RES 0x630#define MSR_PC9_RES 0x631@@ -1998,6 +2000,85 @@ static int opt_handler(int opt, int opt_index, void*data)
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 8 lines
tests/i915/i915_pm_rpm.c +5
-0return IGT_OPT_HANDLER_SUCCESS ; } +static void dpms_off (struct mode_set_data *data) { +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + + kmstest_set_connector_dpms(drm_fd, c,
DRM_MODE_DPMS_OFF);tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 11 lines
tests/i915/i915_pm_rpm.c +11
-0+ } +} + +static void dpms_on (struct mode_set_data *data) { +igt_display_t display; + +igt_display_require (&display, drm_fd); +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + + kmstest_set_connector_dpms(drm_fd, c,
DRM_MODE_DPMS_ON);tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 12 lines
tests/i915/i915_pm_rpm.c +12
-0+ } +} + +static uint32_t get_trace_timestamp (char *dc_data) { +char *e; +long ret; +char *s =strchr (dc_data,':' ); + +assert (s); + s++; + ret =strtol (s, &e,10 ); + assert(((ret != LONG_MIN && ret != LONG_MAX) || errno != ERANGE)&&
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void · line 2031
Quoted 1 line
tests/i915/i915_pm_rpm.c +1
-0+ e > s && *e == '\n' && ret >= 0);it is impossible to know fromthe userspace how long it will take for the machine to go to sleep
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 9 lines
tests/i915/i915_pm_rpm.c +9
-0+return ret; +} + +static long get_timestamp (void ) +{ +struct timespec start; + +clock_gettime (CLOCK_MONOTONIC_RAW , &start); +return (start.tv_sec *1000000 + (start.tv_nsec /1000 )); }By using a monotonic clock, you are measuring the kernel overhead of going to sleep and resuming, and not the time spent off.
Quoted 5 lines
I think you need to explain why you are using it in the commit message (we assume the firmware is basically immediate, as measuring anything there is trickyMartin and measuring the wall time is tricky due to unreliable RTC clocks, and the inability to start the wake up milliseconds after suspend without a kernel patch).
How would to retrieve the clock time from reliable network source like google clock time to avoid any such issues with unreliable RTC clocks ? Please suggest your opinion.
Thanks,
Anshuman Gupta.
Quoted 60 lines
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 11 lines
tests/i915/i915_pm_rpm.c +10
-0+ +static void read_trace (void ) +{ +int fd; +char buf[4096 ]; + + fd =open ("/sys/kernel/debug/tracing/trace" ,O_RDONLY ); +igt_assert (fd >0 ); +igt_assert (read (fd, buf,sizeof (buf))); + igt_assert(((float)(get_trace_timestamp(strstr(buf,"
Suspend_Completed")) -tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void · line 2051
Quoted 1 line
tests/i915/i915_pm_rpm.c +1
-0+ get_trace_timestamp(strstr(buf, "Suspend_Started"))) /1000000) < 1);
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void · line 2053
Quoted 2 lines
tests/i915/i915_pm_rpm.c +2
-0+ igt_assert(((float)(get_trace_timestamp(strstr(buf, "Resume_Ended")) - + get_trace_timestamp(strstr(buf,"
Suspend_Completed"))) / 1000000) < 1);Quoted 4 lines
tests/i915/i915_pm_rpm.c +4
-0+close (fd); +} + +static void test_suspend_resume_latency (struct mode_set_data *data)tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2081
Quoted 10 lines
tests/i915/i915_pm_rpm.c +10
-0+{ +int fd; +char msg[400 ]; + + fd =open ("/sys/kernel/debug/tracing/trace_marker" ,O_WRONLY ); +igt_assert (fd >0 ); +snprintf (msg,100 ,"Suspend_Started : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_off (data); +igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_SUSPE
NDED));tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2081
Quoted 4 lines
tests/i915/i915_pm_rpm.c +4
-0+snprintf (msg,100 ,"Suspend_Completed : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_on (data); +igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_ACTIVE
));tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2080
Quoted 5 lines
tests/i915/i915_pm_rpm.c +5
-0+snprintf (msg,100 ,"Resume_Ended : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +close (fd); +read_trace (); +}Why do you change the DPMS state during the state? Wouldn't you want to have two tests: one with dpms on, and one with dpms off?
Martin
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 4 lines
tests/i915/i915_pm_rpm.c +1
-0+const char *help_str =" --stress\t\tMake the stress-tests more stressful.\n" " --stay\t\tDisable all screen and try to go into runtime pm. Useful fordebugging.";
tests/i915/i915_pm_rpm.c igt_main_args("", long_options, help_str,
Quoted 1 line
tests/i915/i915_pm_rpm.c +0
-0@@ -2147,6 +2228,11 @@ igt_main_args("", long_options, help_str,
opt_handler, NULL)Quoted 3 lines
tests/i915/i915_pm_rpm.c +0
-0pm_test_caching (); }
Quoted 13 lines
tests/i915/i915_pm_rpm.c igt_main_args("", long_options, help_str, opt_handler, NULL) · line 2238
Quoted 9 lines
tests/i915/i915_pm_rpm.c +5
-0+ igt_subtest("suspend-resume-latency") { +test_suspend_resume_latency (&ms_data); + } + +igt_fixture teardown_environment (false );_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 95 lines · Anshuman
Quoted 95 lines
-----Original Message-----
From: igt-dev <[email protected]> On Behalf Of Martin Peres
Sent: Thursday, March 25, 2021 12:53 PM
To: Bhatt, Jigar <[email protected]>; [email protected]
Subject: Re: [igt-dev] [i-g-t RFC v1] tests/i915_pm_rpm: Add suspend-resume- latency testQuoted 4 lines · Jigar Bhatt
Measuring the suspend-resume time using tracefs, writing Suspend Started, Suspend Completed, Resume Ended timestamp into tracefs file. After writing it's reading from tracefs file and measuring different, suspend and resume , individual must be less than 1 sec.
Ahhhh, finally someone got to it! Thanks so much for this, as I was feeling bad for not having had the time to write it myself...
Comments are inlined!
Quoted 7 lines
v1:
- Addlimits.handtime.hSigned-off-by Jigar Bhatt <[email protected]>--- tests/i915/i915_pm_rpm.c | 86++++++++++++++++++++++++++++++++++++++++++++++++
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void
Quoted 16 lines
1 file changed, 86 insertions(+)tests/i915/i915_pm_rpm.c index renamed from tests/i915/i915_pm_rpm.c +0
-0694a3ea..3cc9259 100644
tests/i915/i915_pm_rpm.c +2
-0@@ -53,6 +53,8 @@#include "igt_debugfs.h" #include "igt_device.h" #include "igt_edid.h" +#include "limits.h" +#include "time.h" #define MSR_PC8_RES 0x630#define MSR_PC9_RES 0x631@@ -1998,6 +2000,85 @@ static int opt_handler(int opt, int opt_index, void*data)
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 8 lines
tests/i915/i915_pm_rpm.c +5
-0return IGT_OPT_HANDLER_SUCCESS ; } +static void dpms_off (struct mode_set_data *data) { +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + + kmstest_set_connector_dpms(drm_fd, c,
DRM_MODE_DPMS_OFF);tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 11 lines
tests/i915/i915_pm_rpm.c +11
-0+ } +} + +static void dpms_on (struct mode_set_data *data) { +igt_display_t display; + +igt_display_require (&display, drm_fd); +for (int i =0 ; i < data->res->count_connectors; i++) { +drmModeConnectorPtr c = data->connectors[i]; + + kmstest_set_connector_dpms(drm_fd, c,
DRM_MODE_DPMS_ON);tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 12 lines
tests/i915/i915_pm_rpm.c +12
-0+ } +} + +static uint32_t get_trace_timestamp (char *dc_data) { +char *e; +long ret; +char *s =strchr (dc_data,':' ); + +assert (s); + s++; + ret =strtol (s, &e,10 ); + assert(((ret != LONG_MIN && ret != LONG_MAX) || errno != ERANGE)&&
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void · line 2031
Quoted 1 line
tests/i915/i915_pm_rpm.c +1
-0+ e > s && *e == '\n' && ret >= 0);it is impossible to know fromthe userspace how long it will take for the machine to go to sleep
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 9 lines
tests/i915/i915_pm_rpm.c +9
-0+return ret; +} + +static long get_timestamp (void ) +{ +struct timespec start; + +clock_gettime (CLOCK_MONOTONIC_RAW , &start); +return (start.tv_sec *1000000 + (start.tv_nsec /1000 )); }By using a monotonic clock, you are measuring the kernel overhead of going to sleep and resuming, and not the time spent off.
Quoted 7 lines
Quoted 5 lines
I think you need to explain why you are using it in the commit message (we assume the firmware is basically immediate, as measuring anything there is trickyMartin and measuring the wall time is tricky due to unreliable RTC clocks, and the inability to start the wake up milliseconds after suspend without a kernel patch).
How would to retrieve the clock time from reliable network source like google clock time to avoid any such issues with unreliable RTC clocks ? Please suggest your opinion.
Not sure I would be keen on having IGT depend on NTP, at least until the rest of Linux would be ready for end-to-end latency checks. Let's not delay merging this test.
Quoted 50 lines
Thanks,
Anshuman Gupta.Quoted 47 lines
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 11 lines
tests/i915/i915_pm_rpm.c +10
-0+ +static void read_trace (void ) +{ +int fd; +char buf[4096 ]; + + fd =open ("/sys/kernel/debug/tracing/trace" ,O_RDONLY ); +igt_assert (fd >0 ); +igt_assert (read (fd, buf,sizeof (buf))); + igt_assert(((float)(get_trace_timestamp(strstr(buf,"
Suspend_Completed")) -tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void · line 2051
Quoted 1 line
tests/i915/i915_pm_rpm.c +1
-0+ get_trace_timestamp(strstr(buf, "Suspend_Started"))) /1000000) < 1);
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void · line 2053
Quoted 2 lines
tests/i915/i915_pm_rpm.c +2
-0+ igt_assert(((float)(get_trace_timestamp(strstr(buf, "Resume_Ended")) - + get_trace_timestamp(strstr(buf,"
Suspend_Completed"))) / 1000000) < 1);Quoted 4 lines
tests/i915/i915_pm_rpm.c +4
-0+close (fd); +} + +static void test_suspend_resume_latency (struct mode_set_data *data)tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2081
Quoted 10 lines
tests/i915/i915_pm_rpm.c +10
-0+{ +int fd; +char msg[400 ]; + + fd =open ("/sys/kernel/debug/tracing/trace_marker" ,O_WRONLY ); +igt_assert (fd >0 ); +snprintf (msg,100 ,"Suspend_Started : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_off (data); +igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_SUSPE
NDED));tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2081
Quoted 4 lines
tests/i915/i915_pm_rpm.c +4
-0+snprintf (msg,100 ,"Suspend_Completed : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +dpms_on (data); +igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_ACTIVE
));tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data) · line 2080
Quoted 5 lines
tests/i915/i915_pm_rpm.c +5
-0+snprintf (msg,100 ,"Resume_Ended : %ld" ,get_timestamp ()); +write (fd, msg,strlen (msg)); +close (fd); +read_trace (); +}Why do you change the DPMS state during the state? Wouldn't you want to have two tests: one with dpms on, and one with dpms off?
Ping on this.
Martin
Quoted 13 lines
Quoted 13 lines
Martin
tests/i915/i915_pm_rpm.c static int opt_handler(int opt, int opt_index, void *data)
Quoted 4 lines
tests/i915/i915_pm_rpm.c +1
-0+const char *help_str =" --stress\t\tMake the stress-tests more stressful.\n" " --stay\t\tDisable all screen and try to go into runtime pm. Useful fordebugging.";
tests/i915/i915_pm_rpm.c igt_main_args("", long_options, help_str,
Quoted 1 line
tests/i915/i915_pm_rpm.c +0
-0@@ -2147,6 +2228,11 @@ igt_main_args("", long_options, help_str,
opt_handler, NULL)Quoted 3 lines
tests/i915/i915_pm_rpm.c +0
-0pm_test_caching (); }
Quoted 13 lines
Quoted 5 lines
Quoted 5 lines
tests/i915/i915_pm_rpm.c +5
-0+ igt_subtest("suspend-resume-latency") { +test_suspend_resume_latency (&ms_data); + } + +Quoted 8 lines
tests/i915/i915_pm_rpm.c igt_main_args("", long_options, help_str, opt_handler, NULL) · line 2238
Quoted 4 lines
tests/i915/i915_pm_rpm.c +0
-0igt_fixture teardown_environment (false );_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for tests/i915_pm_rpm: Add suspend-resume-latency test (rev2)
In reply to Jigar Bhatt== Series Details ==
== Series Details ==
Series: tests/i915_pm_rpm: Add suspend-resume-latency test (rev2)
URL : https://patchwork.freedesktop.org/series/88377/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_9892 -> IGTPW_5661
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/index.html
Known issues
------------
Here are the changes found in IGTPW_5661 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@semaphore:
- fi-bsw-nick: NOTRUN -> [SKIP][1] ([fdo#109271]) +17 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/fi-bsw-nick/igt@amdgpu/[email protected]
* igt@debugfs_test@read_all_entries:
- fi-tgl-y: [PASS][2] -> [DMESG-WARN][3] ([i915#402]) +2 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/fi-tgl-y/igt@debugfs_test@read_all_entries.html
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/fi-tgl-y/igt@debugfs_test@read_all_entries.html
* igt@i915_selftest@live@hangcheck:
- fi-tgl-y: [PASS][4] -> [INCOMPLETE][5] ([i915#750])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/fi-tgl-y/igt@i915_selftest@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/fi-tgl-y/igt@i915_selftest@[email protected]
* igt@runner@aborted:
- fi-bdw-5557u: NOTRUN -> [FAIL][6] ([i915#1602] / [i915#2029])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/fi-bdw-5557u/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_suspend@basic-s3:
- fi-tgl-y: [DMESG-WARN][7] ([i915#2411] / [i915#402]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/fi-tgl-y/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/fi-tgl-y/igt@[email protected]
* igt@i915_selftest@live@execlists:
- fi-bsw-nick: [INCOMPLETE][9] ([i915#2782] / [i915#2940]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/fi-bsw-nick/igt@i915_selftest@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/fi-bsw-nick/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@hangcheck:
- {fi-hsw-gt1}: [DMESG-WARN][11] -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/fi-hsw-gt1/igt@i915_selftest@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/fi-hsw-gt1/igt@i915_selftest@[email protected]
* igt@prime_self_import@basic-with_one_bo_two_files:
- fi-tgl-y: [DMESG-WARN][13] ([i915#402]) -> [PASS][14] +1 similar issue
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/fi-tgl-y/igt@prime_self_import@basic-with_one_bo_two_files.html
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/fi-tgl-y/igt@prime_self_import@basic-with_one_bo_two_files.html
#### Warnings ####
* igt@i915_pm_rpm@module-reload:
- fi-glk-dsi: [DMESG-WARN][15] ([i915#1982] / [i915#3143]) -> [DMESG-WARN][16] ([i915#3143])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/fi-glk-dsi/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/fi-glk-dsi/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1222]: https://gitlab.freedesktop.org/drm/intel/issues/1222
[i915#1602]: https://gitlab.freedesktop.org/drm/intel/issues/1602
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2029]: https://gitlab.freedesktop.org/drm/intel/issues/2029
[i915#2411]: https://gitlab.freedesktop.org/drm/intel/issues/2411
[i915#2782]: https://gitlab.freedesktop.org/drm/intel/issues/2782
[i915#2940]: https://gitlab.freedesktop.org/drm/intel/issues/2940
[i915#3143]: https://gitlab.freedesktop.org/drm/intel/issues/3143
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#750]: https://gitlab.freedesktop.org/drm/intel/issues/750
Participating hosts (47 -> 42)
------------------------------
Missing (5): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-dg1-1 fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_6046 -> IGTPW_5661
CI-20190529: 20190529
CI_DRM_9892: 928f83ba052b80754da4bebdd37a1b17c1157f1b @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5661: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/index.html
IGT_6046: e76039273b1524147c43dba061756f06003d56ae @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@i915_pm_rpm@suspend-resume-latency
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: failure for tests/i915_pm_rpm: Add suspend-resume-latency test (rev2)
In reply to Jigar Bhatt== Series Details ==
== Series Details ==
Series: tests/i915_pm_rpm: Add suspend-resume-latency test (rev2)
URL : https://patchwork.freedesktop.org/series/88377/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_9892_full -> IGTPW_5661_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_5661_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_5661_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_5661_full:
### IGT changes ###
#### Possible regressions ####
* igt@gem_userptr_blits@create-destroy-unsync:
- shard-tglb: NOTRUN -> [SKIP][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb6/igt@[email protected]
* igt@gem_userptr_blits@set-cache-level:
- shard-snb: NOTRUN -> [FAIL][3]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-snb7/igt@[email protected]
* {igt@i915_pm_rpm@suspend-resume-latency} (NEW):
- shard-kbl: NOTRUN -> [CRASH][4]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl4/igt@[email protected]
- shard-apl: NOTRUN -> [CRASH][5]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl6/igt@[email protected]
- shard-glk: NOTRUN -> [CRASH][6]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk2/igt@[email protected]
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* {igt@i915_pm_dc@dc9-dpms}:
- shard-iclb: NOTRUN -> [FAIL][7]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb8/igt@[email protected]
* {igt@kms_cursor_crc@pipe-d-cursor-32x10-onscreen}:
- shard-tglb: NOTRUN -> [SKIP][8]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb3/igt@[email protected]
New tests
---------
New tests have been introduced between CI_DRM_9892_full and IGTPW_5661_full:
### New IGT tests (1) ###
* igt@i915_pm_rpm@suspend-resume-latency:
- Statuses : 4 crash(s) 1 skip(s)
- Exec time: [0.0, 10.15] s
Known issues
------------
Here are the changes found in IGTPW_5661_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_ctx_isolation@preservation-s3@bcs0:
- shard-apl: [PASS][9] -> [DMESG-WARN][10] ([i915#180]) +1 similar issue
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-apl2/igt@gem_ctx_isolation@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl8/igt@gem_ctx_isolation@[email protected]
* igt@gem_ctx_persistence@idempotent:
- shard-snb: NOTRUN -> [SKIP][11] ([fdo#109271] / [i915#1099]) +5 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-snb2/igt@[email protected]
* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-iclb: [PASS][12] -> [FAIL][13] ([i915#2842])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-iclb7/igt@gem_exec_fair@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb5/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-none-solo@rcs0:
- shard-kbl: NOTRUN -> [FAIL][14] ([i915#2842])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl2/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-none@vcs1:
- shard-kbl: [PASS][15] -> [FAIL][16] ([i915#2842])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-kbl6/igt@gem_exec_fair@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl7/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-glk: [PASS][17] -> [FAIL][18] ([i915#2842]) +1 similar issue
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk8/igt@gem_exec_fair@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk4/igt@gem_exec_fair@[email protected]
* igt@gem_exec_params@rsvd2-dirt:
- shard-iclb: NOTRUN -> [SKIP][19] ([fdo#109283])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb8/igt@[email protected]
* igt@gem_exec_reloc@basic-wide-active@bcs0:
- shard-apl: NOTRUN -> [FAIL][20] ([i915#2389]) +3 similar issues
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl6/igt@gem_exec_reloc@[email protected]
* igt@gem_huc_copy@huc-copy:
- shard-apl: NOTRUN -> [SKIP][21] ([fdo#109271] / [i915#2190])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl6/igt@[email protected]
* igt@gem_mmap_gtt@cpuset-medium-copy-odd:
- shard-glk: [PASS][22] -> [FAIL][23] ([i915#307])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk1/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk6/igt@[email protected]
* igt@gem_pread@exhaustion:
- shard-apl: NOTRUN -> [WARN][24] ([i915#2658])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl3/igt@[email protected]
- shard-snb: NOTRUN -> [WARN][25] ([i915#2658])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-snb2/igt@[email protected]
* igt@gem_render_copy@x-tiled-to-vebox-y-tiled:
- shard-iclb: NOTRUN -> [SKIP][26] ([i915#768])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb8/igt@[email protected]
* igt@gem_userptr_blits@invalid-mmap-offset-unsync:
- shard-iclb: NOTRUN -> [SKIP][27] ([i915#3297])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb3/igt@[email protected]
* igt@gem_userptr_blits@mmap-offset-invalidate-active@wb:
- shard-snb: NOTRUN -> [SKIP][28] ([fdo#109271]) +415 similar issues
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-snb6/igt@gem_userptr_blits@[email protected]
* igt@gem_userptr_blits@vma-merge:
- shard-snb: NOTRUN -> [FAIL][29] ([i915#2724])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-snb5/igt@[email protected]
- shard-apl: NOTRUN -> [INCOMPLETE][30] ([i915#3295])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl2/igt@[email protected]
- shard-iclb: NOTRUN -> [INCOMPLETE][31] ([i915#3295])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb7/igt@[email protected]
- shard-glk: NOTRUN -> [INCOMPLETE][32] ([i915#3295])
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk3/igt@[email protected]
- shard-kbl: NOTRUN -> [INCOMPLETE][33] ([i915#3295])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl3/igt@[email protected]
- shard-tglb: NOTRUN -> [INCOMPLETE][34] ([i915#3295])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb2/igt@[email protected]
* igt@gen7_exec_parse@cmd-crossing-page:
- shard-tglb: NOTRUN -> [SKIP][35] ([fdo#109289]) +3 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb3/igt@[email protected]
* igt@gen7_exec_parse@oacontrol-tracking:
- shard-glk: NOTRUN -> [SKIP][36] ([fdo#109271]) +38 similar issues
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk3/igt@[email protected]
* igt@gen9_exec_parse@bb-large:
- shard-kbl: NOTRUN -> [FAIL][37] ([i915#3296])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl7/igt@[email protected]
* igt@gen9_exec_parse@bb-start-out:
- shard-iclb: NOTRUN -> [SKIP][38] ([fdo#112306])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb8/igt@[email protected]
* igt@i915_pm_rc6_residency@rc6-idle:
- shard-iclb: NOTRUN -> [WARN][39] ([i915#2681] / [i915#2684])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb8/igt@[email protected]
* igt@i915_pm_rpm@pc8-residency:
- shard-iclb: NOTRUN -> [SKIP][40] ([fdo#109293] / [fdo#109506])
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb6/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][41] ([fdo#109506] / [i915#2411])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb3/igt@[email protected]
* {igt@i915_pm_rpm@suspend-resume-latency} (NEW):
- shard-tglb: NOTRUN -> [CRASH][42] ([i915#2411])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb6/igt@[email protected]
* igt@i915_query@query-topology-unsupported:
- shard-iclb: NOTRUN -> [SKIP][43] ([fdo#109302])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb1/igt@[email protected]
* igt@i915_selftest@live@execlists:
- shard-tglb: [PASS][44] -> [INCOMPLETE][45] ([i915#2268])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-tglb5/igt@i915_selftest@[email protected]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb7/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@hangcheck:
- shard-snb: [PASS][46] -> [INCOMPLETE][47] ([i915#2782])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-snb7/igt@i915_selftest@[email protected]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-snb6/igt@i915_selftest@[email protected]
* igt@kms_async_flips@test-time-stamp:
- shard-tglb: [PASS][48] -> [FAIL][49] ([i915#2597])
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-tglb5/igt@[email protected]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb5/igt@[email protected]
* igt@kms_atomic_transition@plane-all-modeset-transition-fencing:
- shard-iclb: NOTRUN -> [SKIP][50] ([i915#1769])
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb2/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][51] ([i915#1769])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb8/igt@[email protected]
* igt@kms_big_fb@x-tiled-64bpp-rotate-90:
- shard-iclb: NOTRUN -> [SKIP][52] ([fdo#110725] / [fdo#111614]) +2 similar issues
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb7/igt@[email protected]
* igt@kms_big_fb@yf-tiled-8bpp-rotate-180:
- shard-tglb: NOTRUN -> [SKIP][53] ([fdo#111615]) +1 similar issue
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][54] ([fdo#110723])
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb2/igt@[email protected]
* igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
- shard-glk: [PASS][55] -> [FAIL][56] ([fdo#108145])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk1/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk1/igt@[email protected]
* igt@kms_chamelium@hdmi-audio-edid:
- shard-kbl: NOTRUN -> [SKIP][57] ([fdo#109271] / [fdo#111827]) +7 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl6/igt@[email protected]
* igt@kms_chamelium@hdmi-hpd:
- shard-glk: NOTRUN -> [SKIP][58] ([fdo#109271] / [fdo#111827]) +3 similar issues
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk4/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][59] ([fdo#109284] / [fdo#111827]) +3 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb8/igt@[email protected]
* igt@kms_chamelium@vga-edid-read:
- shard-apl: NOTRUN -> [SKIP][60] ([fdo#109271] / [fdo#111827]) +19 similar issues
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl3/igt@[email protected]
* igt@kms_chamelium@vga-hpd-with-enabled-mode:
- shard-iclb: NOTRUN -> [SKIP][61] ([fdo#109284] / [fdo#111827]) +5 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb4/igt@[email protected]
* igt@kms_color@pipe-d-degamma:
- shard-iclb: NOTRUN -> [SKIP][62] ([fdo#109278] / [i915#1149]) +1 similar issue
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb6/igt@[email protected]
- shard-tglb: NOTRUN -> [FAIL][63] ([i915#1149])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb3/igt@[email protected]
* igt@kms_color_chamelium@pipe-d-ctm-0-5:
- shard-snb: NOTRUN -> [SKIP][64] ([fdo#109271] / [fdo#111827]) +21 similar issues
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-snb6/igt@[email protected]
* igt@kms_color_chamelium@pipe-d-ctm-blue-to-red:
- shard-iclb: NOTRUN -> [SKIP][65] ([fdo#109278] / [fdo#109284] / [fdo#111827]) +1 similar issue
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb2/igt@[email protected]
* igt@kms_content_protection@lic:
- shard-apl: NOTRUN -> [TIMEOUT][66] ([i915#1319]) +1 similar issue
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl6/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-512x512-rapid-movement:
- shard-iclb: NOTRUN -> [SKIP][67] ([fdo#109278] / [fdo#109279]) +1 similar issue
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb4/igt@[email protected]
* igt@kms_cursor_crc@pipe-b-cursor-512x170-random:
- shard-tglb: NOTRUN -> [SKIP][68] ([fdo#109279]) +1 similar issue
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb8/igt@[email protected]
* igt@kms_cursor_legacy@cursorb-vs-flipb-atomic-transitions-varying-size:
- shard-iclb: NOTRUN -> [SKIP][69] ([fdo#109274] / [fdo#109278]) +2 similar issues
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb8/igt@kms_cursor_legacy@cursorb-vs-flipb-atomic-transitions-varying-size.html
* igt@kms_cursor_legacy@flip-vs-cursor-varying-size:
- shard-glk: [PASS][70] -> [DMESG-FAIL][71] ([i915#118] / [i915#95])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk8/igt@[email protected]
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk1/igt@[email protected]
* igt@kms_draw_crc@draw-method-rgb565-mmap-wc-ytiled:
- shard-glk: [PASS][72] -> [FAIL][73] ([i915#52] / [i915#54]) +4 similar issues
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk2/igt@[email protected]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk9/igt@[email protected]
* igt@kms_draw_crc@draw-method-rgb565-pwrite-ytiled:
- shard-glk: NOTRUN -> [FAIL][74] ([i915#52] / [i915#54])
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk5/igt@[email protected]
* igt@kms_flip@2x-absolute-wf_vblank:
- shard-iclb: NOTRUN -> [SKIP][75] ([fdo#109274]) +2 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb4/igt@kms_flip@2x-absolute-wf_vblank.html
* igt@kms_flip@flip-vs-expired-vblank-interruptible@b-hdmi-a1:
- shard-glk: [PASS][76] -> [FAIL][77] ([i915#79])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk6/igt@kms_flip@[email protected]
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk8/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
- shard-apl: NOTRUN -> [DMESG-WARN][78] ([i915#180])
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl3/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-suspend@c-dp1:
- shard-kbl: [PASS][79] -> [DMESG-WARN][80] ([i915#180]) +9 similar issues
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-kbl1/igt@kms_flip@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl2/igt@kms_flip@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytileccs:
- shard-apl: NOTRUN -> [FAIL][81] ([i915#2641]) +1 similar issue
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl6/igt@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs:
- shard-apl: NOTRUN -> [SKIP][82] ([fdo#109271] / [i915#2672])
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl7/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile:
- shard-apl: NOTRUN -> [SKIP][83] ([fdo#109271] / [i915#2642]) +1 similar issue
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl6/igt@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile:
- shard-tglb: NOTRUN -> [SKIP][84] ([i915#2587])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb2/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][85] ([fdo#109271] / [i915#2642])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk3/igt@[email protected]
- shard-kbl: NOTRUN -> [SKIP][86] ([fdo#109271] / [i915#2642])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl3/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-indfb-draw-render:
- shard-glk: [PASS][87] -> [FAIL][88] ([i915#49]) +1 similar issue
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk9/igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-indfb-draw-render.html
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk5/igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-indfb-draw-render.html
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-move:
- shard-tglb: NOTRUN -> [SKIP][89] ([fdo#111825]) +16 similar issues
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb5/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-2p-shrfb-fliptrack-mmap-gtt:
- shard-iclb: NOTRUN -> [SKIP][90] ([fdo#109280]) +18 similar issues
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb2/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-b-alpha-7efc:
- shard-apl: NOTRUN -> [FAIL][91] ([fdo#108145] / [i915#265]) +1 similar issue
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl3/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-c-alpha-transparent-fb:
- shard-apl: NOTRUN -> [FAIL][92] ([i915#265])
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl1/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-d-coverage-vs-premult-vs-constant:
- shard-iclb: NOTRUN -> [SKIP][93] ([fdo#109278]) +11 similar issues
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb6/igt@kms_plane_alpha_blend@pipe-d-coverage-vs-premult-vs-constant.html
* igt@kms_plane_multiple@atomic-pipe-d-tiling-x:
- shard-kbl: NOTRUN -> [SKIP][94] ([fdo#109271]) +80 similar issues
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl7/igt@[email protected]
* igt@kms_plane_scaling@scaler-with-clipping-clamping@pipe-c-scaler-with-clipping-clamping:
- shard-apl: NOTRUN -> [SKIP][95] ([fdo#109271] / [i915#2733])
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl7/igt@kms_plane_scaling@scaler-with-clipping-clamping@pipe-c-scaler-with-clipping-clamping.html
- shard-kbl: NOTRUN -> [SKIP][96] ([fdo#109271] / [i915#2733])
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl6/igt@kms_plane_scaling@scaler-with-clipping-clamping@pipe-c-scaler-with-clipping-clamping.html
- shard-glk: NOTRUN -> [SKIP][97] ([fdo#109271] / [i915#2733])
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk9/igt@kms_plane_scaling@scaler-with-clipping-clamping@pipe-c-scaler-with-clipping-clamping.html
* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-1:
- shard-apl: NOTRUN -> [SKIP][98] ([fdo#109271] / [i915#658]) +4 similar issues
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl1/igt@[email protected]
* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-4:
- shard-iclb: NOTRUN -> [SKIP][99] ([i915#658]) +1 similar issue
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb6/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][100] ([fdo#109271] / [i915#658])
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk7/igt@[email protected]
* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-2:
- shard-kbl: NOTRUN -> [SKIP][101] ([fdo#109271] / [i915#658]) +1 similar issue
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl4/igt@[email protected]
* igt@kms_psr@psr2_cursor_render:
- shard-iclb: [PASS][102] -> [SKIP][103] ([fdo#109441]) +2 similar issues
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-iclb2/igt@kms_psr@psr2_cursor_render.html
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb7/igt@kms_psr@psr2_cursor_render.html
* igt@kms_psr@psr2_primary_render:
- shard-iclb: NOTRUN -> [SKIP][104] ([fdo#109441])
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb8/igt@kms_psr@psr2_primary_render.html
* igt@kms_vblank@pipe-d-wait-idle:
- shard-kbl: NOTRUN -> [SKIP][105] ([fdo#109271] / [i915#533]) +2 similar issues
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl4/igt@[email protected]
- shard-apl: NOTRUN -> [SKIP][106] ([fdo#109271] / [i915#533]) +1 similar issue
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl1/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][107] ([fdo#109271] / [i915#533])
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk7/igt@[email protected]
* igt@nouveau_crc@pipe-b-source-rg:
- shard-tglb: NOTRUN -> [SKIP][108] ([i915#2530]) +1 similar issue
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb6/igt@[email protected]
* igt@nouveau_crc@pipe-c-source-rg:
- shard-iclb: NOTRUN -> [SKIP][109] ([i915#2530])
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb6/igt@[email protected]
* igt@perf@unprivileged-single-ctx-counters:
- shard-iclb: NOTRUN -> [SKIP][110] ([fdo#109289]) +4 similar issues
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb2/igt@[email protected]
* igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name:
- shard-apl: NOTRUN -> [SKIP][111] ([fdo#109271]) +189 similar issues
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl8/igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name.html
- shard-tglb: NOTRUN -> [SKIP][112] ([fdo#109291]) +1 similar issue
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb2/igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name.html
* igt@prime_nv_test@nv_i915_sharing:
- shard-iclb: NOTRUN -> [SKIP][113] ([fdo#109291]) +2 similar issues
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb4/igt@prime_nv_test@nv_i915_sharing.html
* igt@prime_vgem@sync@rcs0:
- shard-iclb: [PASS][114] -> [INCOMPLETE][115] ([i915#409])
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-iclb1/igt@prime_vgem@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb6/igt@prime_vgem@[email protected]
* igt@sysfs_clients@fair-3:
- shard-tglb: NOTRUN -> [SKIP][116] ([i915#2994])
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb5/igt@[email protected]
* igt@sysfs_clients@sema-50:
- shard-iclb: NOTRUN -> [SKIP][117] ([i915#2994]) +2 similar issues
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb6/igt@[email protected]
* igt@sysfs_timeslice_duration@timeout@vecs0:
- shard-apl: [PASS][118] -> [FAIL][119] ([i915#1755])
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-apl7/igt@sysfs_timeslice_duration@[email protected]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl8/igt@sysfs_timeslice_duration@[email protected]
#### Possible fixes ####
* igt@feature_discovery@psr2:
- shard-iclb: [SKIP][120] ([i915#658]) -> [PASS][121]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-iclb3/igt@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb2/igt@[email protected]
* igt@gem_ctx_persistence@close-replace-race:
- shard-glk: [TIMEOUT][122] ([i915#2918]) -> [PASS][123]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk3/igt@[email protected]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk4/igt@[email protected]
* igt@gem_exec_fair@basic-deadline:
- shard-glk: [FAIL][124] ([i915#2846]) -> [PASS][125]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk1/igt@[email protected]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk4/igt@[email protected]
* igt@gem_exec_fair@basic-none-solo@rcs0:
- shard-apl: [FAIL][126] ([i915#2842]) -> [PASS][127]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-apl7/igt@gem_exec_fair@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-apl8/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-none@vecs0:
- shard-kbl: [FAIL][128] ([i915#2842]) -> [PASS][129]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-kbl6/igt@gem_exec_fair@[email protected]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-kbl7/igt@gem_exec_fair@[email protected]
* igt@gem_exec_whisper@basic-fds-priority-all:
- shard-glk: [DMESG-WARN][130] ([i915#118] / [i915#95]) -> [PASS][131]
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-glk1/igt@[email protected]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-glk6/igt@[email protected]
* igt@gem_exec_whisper@basic-queues-forked:
- shard-iclb: [INCOMPLETE][132] ([i915#1895] / [i915#2405]) -> [PASS][133]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-iclb4/igt@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-iclb8/igt@[email protected]
* igt@gem_huc_copy@huc-copy:
- shard-tglb: [SKIP][134] ([i915#2190]) -> [PASS][135]
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9892/shard-tglb6/igt@[email protected]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/shard-tglb8/igt@[email protected]
* igt@gem_mmap_gtt@big-copy:
- shard-glk: [FAIL][136] ([i915#307]) -> [PASS][137] +1 similar issue
[136]: htt
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5661/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev