regulator: rt6160: Add DT binding documet for Richtek RT6160
Subsystems (2)
PATCH 1/2 regulator: rt6160: Add DT binding documet for Richtek RT6160
From: ChiYuan Huang <[email protected]>
Add the DT binding document for Richtek RT6160 voltage regulator.
Signed-off-by ChiYuan Huang <[email protected]>
--- .../regulator/richtek,rt6160-regulator.yaml | 68 ++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml
Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file +68 -0
@@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6160 BuckBoost converter + +maintainers: + - ChiYuan Huang <[email protected]> + +description: | + The RT6160 is a high-efficiency buck-boost converter that can provide + up to 3A output current from 2025mV to 5200mV. And it support the wide + input voltage range from 2200mV to 5500mV. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf + +properties: + compatible: + enum: + - richtek,rt6160 + + reg: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line. + maxItems: 1 + + richtek,vsel_active_low: + description: | + Used to indicate the 'vsel' pin active level. if not specified, use + high active level as the default. + type: boolean + +patternProperties: + buckboost: + description: BuckBoost converter regulator description. + type: object + $ref: regulator.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6160@75 { + compatible = "richtek,rt6160"; + reg = <0x75>; + enable-gpios = <&gpio26 2 0>; + + buckboost { + regulator-name = "rt6160-buckboost"; + regulator-min-microvolt = <2025000>; + regulator-max-microvolt = <5200000>; + regulator-allowed-modes = <0 1>; + }; + }; + };
Signature · 1 line
2.7.4
PATCH 2/2 regulator: rt6160: Add support for Richtek RT6160
From: ChiYuan Huang <[email protected]>
Add support for Richtek RT6160 voltage regulator. It can provide up to 3A output current within the adjustable voltage from 2025mV to 5200mV. It integrate a buck-boost converter to support wide input voltage range from 2200mV to 5500mV.
Signed-off-by ChiYuan Huang <[email protected]>
--- drivers/regulator/Kconfig | 11 ++ drivers/regulator/Makefile | 1 + drivers/regulator/rt6160-regulator.c | 265 +++++++++++++++++++++++++++++++++++ 3 files changed, 277 insertions(+) create mode 100644 drivers/regulator/rt6160-regulator.c
drivers/regulator/Kconfig +11 -0
@@ -1030,6 +1030,17 @@ config REGULATOR_RT5033 RT5033 PMIC. The device supports multiple regulators like current source, LDO and Buck. +config REGULATOR_RT6160 + tristate "Richtek RT6160 BuckBoost voltage regulator" + depends on I2C + select REGMAP_I2C + help + This adds support for voltage regulator in Richtek RT6160. + This device automatically change voltage output mode from + Buck or Boost. The mode transistion depend on the input source voltage. + The wide output range is from 2025mV to 5200mV and can be used on most + common application scenario. + config REGULATOR_RTMV20 tristate "RTMV20 Laser Diode Regulator" depends on I2C
drivers/regulator/Makefile +1 -0
@@ -124,6 +124,7 @@ obj-$(CONFIG_REGULATOR_ROHM) += rohm-regulator.o obj-$(CONFIG_REGULATOR_RT4801) += rt4801-regulator.o obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o +obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
drivers/regulator/rt6160-regulator.c new file +265 -0
265 lines not on this page · raw message
Signature · 1 line
2.7.4
Rob Herring
maintainerQuoted 1 line · cy_huang
From: ChiYuan Huang <[email protected]>
Typo in the subject.
Quoted 44 lines
Add the DT binding document for Richtek RT6160 voltage regulator.
Signed-off-by ChiYuan Huang <[email protected]>--- .../regulator/richtek,rt6160-regulator.yaml | 68 ++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yamlDocumentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file +29
-0@@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6160 BuckBoost converter + +maintainers: + - ChiYuan Huang <[email protected]> + +description: | + The RT6160 is a high-efficiency buck-boost converter that can provide + up to 3A output current from 2025mV to 5200mV. And it support the wide + input voltage range from 2200mV to 5500mV. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf + +properties: + compatible: + enum: + - richtek,rt6160 + + reg: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line.
Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml line 39
Quoted 10 lines
Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file +10
-0+ maxItems: 1 + + richtek,vsel_active_low: + description: | + Used to indicate the 'vsel' pin active level. if not specified, use + high active level as the default. + type: boolean + +patternProperties: + buckboost:
foo-buckboost-bar is valid name?
It's not a pattern, so move to 'properties'.
Quoted 32 lines
Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file +29
-0+ description: BuckBoost converter regulator description. + type: object + $ref: regulator.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6160@75 { + compatible = "richtek,rt6160"; + reg = <0x75>; + enable-gpios = <&gpio26 2 0>; + + buckboost { + regulator-name = "rt6160-buckboost"; + regulator-min-microvolt = <2025000>; + regulator-max-microvolt = <5200000>; + regulator-allowed-modes = <0 1>; + }; + }; + };Signature · 1 line
2.7.4
HI,
Rob Herring <[email protected]> 於 2021年5月6日 週四 下午11:27寫道：
Quoted 6 lines · cy_huang
Quoted 1 line
From: ChiYuan Huang <[email protected]>
Typo in the subject.
Will be fixed in next.
Quoted 57 lines
Quoted 44 lines
Add the DT binding document for Richtek RT6160 voltage regulator.
Signed-off-by ChiYuan Huang <[email protected]>--- .../regulator/richtek,rt6160-regulator.yaml | 68 ++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yamlDocumentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file +29
-0@@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6160 BuckBoost converter + +maintainers: + - ChiYuan Huang <[email protected]> + +description: | + The RT6160 is a high-efficiency buck-boost converter that can provide + up to 3A output current from 2025mV to 5200mV. And it support the wide + input voltage range from 2200mV to 5500mV. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf + +properties: + compatible: + enum: + - richtek,rt6160 + + reg: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line.Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml line 39
Quoted 10 lines
Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file +10
-0+ maxItems: 1 + + richtek,vsel_active_low: + description: | + Used to indicate the 'vsel' pin active level. if not specified, use + high active level as the default. + type: boolean + +patternProperties: + buckboost:foo-buckboost-bar is valid name?
Quoted 2 lines
It's not a pattern, so move to 'properties'.
Sorry, maybe I misunderstand the meaning of patternProperty. I'll move it into the properties, Thanks.
Quoted 32 lines
Quoted 32 lines
Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file +29
-1+ description: BuckBoost converter regulator description. + type: object + $ref: regulator.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6160@75 { + compatible = "richtek,rt6160"; + reg = <0x75>; + enable-gpios = <&gpio26 2 0>; + + buckboost { + regulator-name = "rt6160-buckboost"; + regulator-min-microvolt = <2025000>; + regulator-max-microvolt = <5200000>; + regulator-allowed-modes = <0 1>; + }; + }; + }; --2.7.4