FAILED: patch "[PATCH] usb: typec: tcpm: Address incorrect values of tcpm psy for" failed to apply to 4.19-stable tree
Subsystems (4)
[email protected]
maintainerThe patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f3dedafb8263ca4791a92a23f5230068f5bde008 Mon Sep 17 00:00:00 2001
From: Badhri Jagan Sridharan <[email protected]>
Date: Wed, 7 Apr 2021 13:07:18 -0700
Subject: [PATCH] usb: typec: tcpm: Address incorrect values of tcpm psy for
fixed supply
tcpm_pd_build_request overwrites current_limit and supply_voltage even before port partner accepts the requests. This leaves stale values in current_limit and supply_voltage that get exported by "tcpm-source-psy-". Solving this problem by caching the request values of current limit/supply voltage in req_current_limit and req_supply_voltage. current_limit/supply_voltage gets updated once the port partner accepts the request.
drivers/usb/typec/tcpm/tcpm.c +10 -7
@@ -389,7 +389,10 @@ struct tcpm_port {unsigned int operating_snk_mw;bool update_sink_caps; -/* Requested current / voltage */ +/* Requested current / voltage to the port partner */ +u32 req_current_limit; +u32 req_supply_voltage; +/* Actual current / voltage limit of the local port */ u32 current_limit;u32 supply_voltage;
@@ -2435,8 +2438,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,case SNK_TRANSITION_SINK :if (port->vbus_present) {tcpm_set_current_limit (port, - port->current_limit, - port->supply_voltage); + port->req_current_limit, + port->req_supply_voltage); port->explicit_contract = true; tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD,
@@ -2545,8 +2548,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,break ;case SNK_NEGOTIATE_PPS_CAPABILITIES : port->pps_data.active = true; - port->supply_voltage = port->pps_data.out_volt; - port->current_limit = port->pps_data.op_curr; + port->req_supply_voltage = port->pps_data.out_volt; + port->req_current_limit = port->pps_data.op_curr;tcpm_set_state (port,SNK_TRANSITION_SINK ,0 );break ;case SOFT_RESET_SEND :
@@ -3195,8 +3198,8 @@ static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo) flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); } - port->current_limit = ma; - port->supply_voltage = mv; + port->req_current_limit = ma; + port->req_supply_voltage = mv;return 0 ; }