Skip to contentSkip to conversation

FAILED: patch "[PATCH] usb: dwc3: gadget: Enable suspend events" failed to apply to 4.19-stable tree

PATCH [email protected] 1 participant 1 message May 17, 2021

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From d1d90dd27254c44d087ad3f8b5b3e4fff0571f45 Mon Sep 17 00:00:00 2001
From: Jack Pham <[email protected]>
Date: Wed, 28 Apr 2021 02:01:10 -0700
Subject: [PATCH] usb: dwc3: gadget: Enable suspend events

commit 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") introduced (nearly 5 years ago!) an interrupt handler for U3/L1-L2 suspend events. The problem is that these events aren't currently enabled in the DEVTEN register so the handler is never even invoked. Fix this simply by enabling the corresponding bit in dwc3_gadget_enable_irq() using the same revision check as found in the handler.

Fixes 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler")
Cc stable <[email protected]>
drivers/usb/dwc3/gadget.c +4 -0
index dd80e5ca8c78..cab3a9184068 100644
@@ -2323,6 +2323,10 @@ static void dwc3_gadget_enable_irq(struct dwc3 *dwc)
 	if (DWC3_VER_IS_PRIOR(DWC3, 250A))
 		reg |= DWC3_DEVTEN_ULSTCNGEN;
 
+	/* On 2.30a and above this bit enables U3/L2-L1 Suspend Events */
+	if (!DWC3_VER_IS_PRIOR(DWC3, 230A))
+		reg |= DWC3_DEVTEN_EOPFEN;
+
 	dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
 }