Skip to contentSkip to conversation

patch "serial: 8250_pci: Add support for new HPE serial device" added to tty-linus

PATCH [email protected] 1 participant 1 message May 20, 2021

Subsystems (2)
Stable branch TTY layer and serial drivers
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

serial: 8250_pci: Add support for new HPE serial device

to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From e0e24208792080135248f23fdf6d51aa2e04df05 Mon Sep 17 00:00:00 2001
From: Randy Wright <[email protected]>
Date: Fri, 14 May 2021 10:26:54 -0600
Subject: serial: 8250_pci: Add support for new HPE serial device

Add support for new HPE serial device. It is MSI enabled, but otherwise similar to legacy HP server serial devices.

Tested-by Jerry Hoemann <[email protected]>
Signed-off-by Randy Wright <[email protected]>
Cc stable <[email protected]>
Link https://lore.kernel.org/r/[email protected] open here
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/tty/serial/8250/8250_pci.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/tty/serial/8250/8250_pci.c +18 -0
index 689d8227f95f..04fe42469990 100644
@@ -56,6 +56,8 @@ struct serial_private {
 	int			line[];
 };
 
+#define PCI_DEVICE_ID_HPE_PCI_SERIAL	0x37e
+
 static const struct pci_device_id pci_use_msi[] = {
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
 			 0xA000, 0x1000) },

@@ -63,6 +65,8 @@ static const struct pci_device_id pci_use_msi[] = {
 			 0xA000, 0x1000) },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
 			 0xA000, 0x1000) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
+			 PCI_ANY_ID, PCI_ANY_ID) },
 	{ }
 };
 

@@ -1997,6 +2001,16 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.init		= pci_hp_diva_init,
 		.setup		= pci_hp_diva_setup,
 	},
+	/*
+	 * HPE PCI serial device
+	 */
+	{
+		.vendor         = PCI_VENDOR_ID_HP_3PAR,
+		.device         = PCI_DEVICE_ID_HPE_PCI_SERIAL,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup		= pci_hp_diva_setup,
+	},
 	/*
 	 * Intel
 	 */

@@ -4973,6 +4987,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b2_1_115200 },
+	/* HPE PCI serial device */
+	{	PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_1_115200 },
 
 	{	PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
Signature · 1 line
2.31.1