Skip to contentSkip to conversation

drm/msm/dp: power off DP phy base on mainlink status at suspend

PATCH Superseded Kuogee Hsieh 2 participants 3 messages May 26, 2021

Subsystems (3)

v1 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/msm/dp: power off DP phy base on mainlink status at suspend

DP mainlink can be either enabled or disabled at the time of suspend happen. Therefore DP phy teared down at suspend should base on mainlink status at that instance.

---
 drivers/gpu/drm/msm/dp/dp_ctrl.c    | 5 ++++-
 drivers/gpu/drm/msm/dp/dp_ctrl.h    | 2 +-
 drivers/gpu/drm/msm/dp/dp_display.c | 9 ++++++++-
 3 files changed, 13 insertions(+), 3 deletions(-)
drivers/gpu/drm/msm/dp/dp_ctrl.c +4 -1
index dbd8943..5115c05 100644
@@ -1398,7 +1398,7 @@ int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset)
  * Perform required steps to uninitialize DP controller
  * and its resources.
  */
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl, bool mainlink_on)
 {
 	struct dp_ctrl_private *ctrl;
 	struct dp_io *dp_io;
@@ -1414,6 +1414,9 @@ void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
 	phy = dp_io->phy;
 
 	dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
+	if (mainlink_on)
+		phy_power_off(phy);
+
 	phy_exit(phy);
 
 	DRM_DEBUG_DP("Host deinitialized successfully\n");
drivers/gpu/drm/msm/dp/dp_ctrl.h +1 -1
index 25e4f75..a23ee2b 100644
@@ -20,7 +20,7 @@ struct dp_ctrl {
 };
 
 int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset);
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl, bool mainlink_on);
 int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);
drivers/gpu/drm/msm/dp/dp_display.c +8 -1
index cdec0a3..88eeeb5 100644
@@ -104,6 +104,8 @@ struct dp_display_private {
 
 	bool encoder_mode_set;
 
+	bool mainlink_on;
+
 	/* wait for audio signaling */
 	struct completion audio_comp;
 
@@ -353,11 +355,14 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
 	dp_link_psm_config(dp->link, &dp->panel->link_info, false);
 
 	dp_link_reset_phy_params_vx_px(dp->link);
+
+	dp->mainlink_on = false;
 	rc = dp_ctrl_on_link(dp->ctrl);
 	if (rc) {
 		DRM_ERROR("failed to complete DP link training\n");
 		goto end;
 	}
+	dp->mainlink_on = true;
 
 	dp_add_event(dp, EV_USER_NOTIFICATION, true, 0);
 
@@ -392,7 +397,7 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
 		return;
 	}
 
-	dp_ctrl_host_deinit(dp->ctrl);
+	dp_ctrl_host_deinit(dp->ctrl, dp->mainlink_on);
 	dp_aux_deinit(dp->aux);
 	dp_power_deinit(dp->power);
 
@@ -941,6 +946,8 @@ static int dp_display_disable(struct dp_display_private *dp, u32 data)
 		dp->core_initialized = false;
 	}
 
+	dp->mainlink_on = false;
+
 	dp_display->power_on = false;
 
 	return 0;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#1 lore raw

Quoting Kuogee Hsieh (2021-05-26 11:08:23)

Quoted 3 lines

DP mainlink can be either enabled or disabled at the time of suspend happen. Therefore DP phy teared down at suspend should base on mainlink status at that instance.

Please add some more details here. The system crashes if you plug in the HDMI cable during system wide suspend. That seems to be because the DP phy isn't powered down during suspend if the HDMI cable is disconnected so we try to process the hpd plug event on the path to suspend instead of wait to bring up the phy and then the display?

I'm trying to find the case when we would be entering suspend and only have called phy_init() without calling phy_exit(). What path is that? I guess it is dp_ctrl_off_link_stream() called when the sink count goes to 0? So plug in HDMI cable to apple dongle, unplug HDMI cable to apple dongle and phy_power_off() followed by phy_exit() followed by phy_init() and then enter suspend so we want to call phy_exit(). Then we only call phy_power_off() if we've called dp_ctrl_on()? I think I followed it all.

Quoted 49 lines
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c    | 5 ++++-
 drivers/gpu/drm/msm/dp/dp_ctrl.h    | 2 +-
 drivers/gpu/drm/msm/dp/dp_display.c | 9 ++++++++-
 3 files changed, 13 insertions(+), 3 deletions(-)
drivers/gpu/drm/msm/dp/dp_ctrl.c +4 -1
index dbd8943..5115c05 100644
@@ -1398,7 +1398,7 @@ int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset)
  * Perform required steps to uninitialize DP controller
  * and its resources.
  */
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl, bool mainlink_on)
 {
        struct dp_ctrl_private *ctrl;
        struct dp_io *dp_io;
@@ -1414,6 +1414,9 @@ void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
        phy = dp_io->phy;
 
        dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
+       if (mainlink_on)
+               phy_power_off(phy);
+
        phy_exit(phy);
 
        DRM_DEBUG_DP("Host deinitialized successfully\n");
drivers/gpu/drm/msm/dp/dp_ctrl.h +1 -1
index 25e4f75..a23ee2b 100644
@@ -20,7 +20,7 @@ struct dp_ctrl {
 };
 
 int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset);
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl, bool mainlink_on);
 int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);
drivers/gpu/drm/msm/dp/dp_display.c +0 -0
index cdec0a3..88eeeb5 100644

drivers/gpu/drm/msm/dp/dp_display.c struct dp_display_private { · line 108

Quoted 5 lines
drivers/gpu/drm/msm/dp/dp_display.c +2 -0
@@ -104,6 +104,8 @@ struct dp_display_private {
 
        bool encoder_mode_set;
 
+       bool mainlink_on;
+

Is there a reason why this can't be stashed away in dp_ctrl.c in the 'struct dp_ctrl'? It seems to follow closely with dp_ctrl_*() APIs.

drivers/gpu/drm/msm/dp/dp_display.c static int dp_display_process_hpd_high(struct dp_display_private *dp) · line 359

Quoted 9 lines
drivers/gpu/drm/msm/dp/dp_display.c +2 -0
        /* wait for audio signaling */
        struct completion audio_comp;
 
@@ -353,11 +355,14 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
        dp_link_psm_config(dp->link, &dp->panel->link_info, false);
 
        dp_link_reset_phy_params_vx_px(dp->link);
+
+       dp->mainlink_on = false;

Isn't this too late to be setting it to false? i.e. it should be false by default, and then set to false when a dp_ctrl_off() call is made?

Quoted 19 lines
drivers/gpu/drm/msm/dp/dp_display.c +2 -1
        rc = dp_ctrl_on_link(dp->ctrl);
        if (rc) {
                DRM_ERROR("failed to complete DP link training\n");
                goto end;
        }
+       dp->mainlink_on = true;
 
        dp_add_event(dp, EV_USER_NOTIFICATION, true, 0);
 
@@ -392,7 +397,7 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
                return;
        }
 
-       dp_ctrl_host_deinit(dp->ctrl);
+       dp_ctrl_host_deinit(dp->ctrl, dp->mainlink_on);
        dp_aux_deinit(dp->aux);
        dp_power_deinit(dp->power);
 

drivers/gpu/drm/msm/dp/dp_display.c static int dp_display_disable(struct dp_display_private *dp, u32 data) · line 953

Quoted 8 lines
drivers/gpu/drm/msm/dp/dp_display.c +2 -0
@@ -941,6 +946,8 @@ static int dp_display_disable(struct dp_display_private *dp, u32 data)
                dp->core_initialized = false;
        }
 
+       dp->mainlink_on = false;
+
        dp_display->power_on = false;
 
        return 0;

It would certainly help to keep it contained to one file instead of two.

#2 lore raw
Quoted 11 lines · Stephen Boyd

Quoting Kuogee Hsieh (2021-05-26 11:08:23)

Quoted 3 lines

DP mainlink can be either enabled or disabled at the time of suspend happen. Therefore DP phy teared down at suspend should base on mainlink status at that instance.

Please add some more details here. The system crashes if you plug in the HDMI cable during system wide suspend. That seems to be because the DP phy isn't powered down during suspend if the HDMI cable is disconnected so we try to process the hpd plug event on the path to suspend instead of wait to bring up the phy and then the display?

Quoted 8 lines

I'm trying to find the case when we would be entering suspend and only have called phy_init() without calling phy_exit(). What path is that? I guess it is dp_ctrl_off_link_stream() called when the sink count goes to 0? So plug in HDMI cable to apple dongle, unplug HDMI cable to apple dongle and phy_power_off() followed by phy_exit() followed by phy_init() and then enter suspend so we want to call phy_exit(). Then we only call phy_power_off() if we've called dp_ctrl_on()? I think I followed it all.

ok, will do

Quoted 53 lines
Quoted 53 lines
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c    | 5 ++++-
 drivers/gpu/drm/msm/dp/dp_ctrl.h    | 2 +-
 drivers/gpu/drm/msm/dp/dp_display.c | 9 ++++++++-
 3 files changed, 13 insertions(+), 3 deletions(-)
drivers/gpu/drm/msm/dp/dp_ctrl.c +1 -1
index dbd8943..5115c05 100644
@@ -1398,7 +1398,7 @@ int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, 
 bool flip, bool reset)
  * Perform required steps to uninitialize DP controller
  * and its resources.
  */
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl, bool mainlink_on)
 {
        struct dp_ctrl_private *ctrl;
        struct dp_io *dp_io;
drivers/gpu/drm/msm/dp/dp_ctrl.c +3 -0
@@ -1414,6 +1414,9 @@ void dp_ctrl_host_deinit(struct dp_ctrl 
 *dp_ctrl)
        phy = dp_io->phy;
 
        dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
+       if (mainlink_on)
+               phy_power_off(phy);
+
        phy_exit(phy);
 
        DRM_DEBUG_DP("Host deinitialized successfully\n");
drivers/gpu/drm/msm/dp/dp_ctrl.h +1 -1
index 25e4f75..a23ee2b 100644
@@ -20,7 +20,7 @@ struct dp_ctrl {
 };
 
 int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool 
 reset);
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl, bool mainlink_on);
 int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);

int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);

drivers/gpu/drm/msm/dp/dp_display.c +0 -0
index cdec0a3..88eeeb5 100644
@@ -104,6 +104,8 @@ struct dp_display_private {
 
Quoted 7 lines

drivers/gpu/drm/msm/dp/dp_display.c struct dp_display_private { · line 108

Quoted 4 lines
drivers/gpu/drm/msm/dp/dp_display.c +2 -0
        bool encoder_mode_set;
 
+       bool mainlink_on;
+

Is there a reason why this can't be stashed away in dp_ctrl.c in the 'struct dp_ctrl'? It seems to follow closely with dp_ctrl_*() APIs.

yes, I will do that.

Quoted 39 lines

drivers/gpu/drm/msm/dp/dp_display.c static int dp_display_process_hpd_high(struct · line 360

Quoted 11 lines
drivers/gpu/drm/msm/dp/dp_display.c +2 -0
        /* wait for audio signaling */
        struct completion audio_comp;
 
@@ -353,11 +355,14 @@ static int dp_display_process_hpd_high(struct 
 dp_display_private *dp)
        dp_link_psm_config(dp->link, &dp->panel->link_info, false);
 
        dp_link_reset_phy_params_vx_px(dp->link);
+
+       dp->mainlink_on = false;

Isn't this too late to be setting it to false? i.e. it should be false by default, and then set to false when a dp_ctrl_off() call is made?

Quoted 24 lines
drivers/gpu/drm/msm/dp/dp_display.c +2 -1
        rc = dp_ctrl_on_link(dp->ctrl);
        if (rc) {
                DRM_ERROR("failed to complete DP link training\n");
                goto end;
        }
+       dp->mainlink_on = true;
 
        dp_add_event(dp, EV_USER_NOTIFICATION, true, 0);
@@ -392,7 +397,7 @@ static void dp_display_host_deinit(struct 
 dp_display_private *dp)
                return;
        }
 
-       dp_ctrl_host_deinit(dp->ctrl);
+       dp_ctrl_host_deinit(dp->ctrl, dp->mainlink_on);
        dp_aux_deinit(dp->aux);
        dp_power_deinit(dp->power);
@@ -941,6 +946,8 @@ static int dp_display_disable(struct 
 dp_display_private *dp, u32 data)
                dp->core_initialized = false;
        }
 
Quoted 7 lines
Quoted 5 lines
drivers/gpu/drm/msm/dp/dp_display.c +2 -0
+       dp->mainlink_on = false;
+
        dp_display->power_on = false;
 
        return 0;

It would certainly help to keep it contained to one file instead of two.

agree,