patch "usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled" added to usb-linus

This is a note to let you know that I've just added the patch titled

usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From 4d2aa178d2ad2fb156711113790dde13e9aa2376 Mon Sep 17 00:00:00 2001
From: Neil Armstrong <[email protected]>
Date: Tue, 1 Jun 2021 10:48:30 +0200
Subject: usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

When only PHY1 is used (for example on Odroid-HC4), the regmap init code uses the usb2 ports when doesn't initialize the PHY1 regmap entry.

This fixes:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
pc : regmap_update_bits_base+0x40/0xa0
lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
...
Call trace:
regmap_update_bits_base+0x40/0xa0
dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
dwc3_meson_g12a_usb2_init+0x7c/0xc8
dwc3_meson_g12a_usb_init+0x28/0x48
dwc3_meson_g12a_probe+0x298/0x540
platform_probe+0x70/0xe0
really_probe+0xf0/0x4d8
driver_probe_device+0xfc/0x168

...

---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

index 804957525130..ffe301d6ea35 100644
@@ -651,7 +651,7 @@ static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
 		return PTR_ERR(priv->usb_glue_regmap);
 
 	/* Create a regmap for each USB2 PHY control register set */
-	for (i = 0; i < priv->usb2_ports; i++) {
+	for (i = 0; i < priv->drvdata->num_phys; i++) {
 		struct regmap_config u2p_regmap_config = {
 			.reg_bits = 8,
 			.val_bits = 32,

@@ -659,6 +659,9 @@ static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
 			.max_register = U2P_R1,
 		};
 
+		if (!strstr(priv->drvdata->phy_names[i], "usb2"))
+			continue;
+
 		u2p_regmap_config.name = devm_kasprintf(priv->dev, GFP_KERNEL,
 							"u2p-%d", i);
 		if (!u2p_regmap_config.name)

2.31.1