perf probe: Report permission errors
cover perf probe: Report permission errors
Hi Arnaldo and Ravi,
Here is a couple of patches to improve error message for the permission errors on perf probe, which we talked in the following thread;
https://lore.kernel.org/lkml/[email protected]/
Thank you,
---
Masami Hiramatsu (2):
perf/probe: Report possible permission error for map__load failure perf/probe: Report permission error for tracefs error
tools/perf/util/probe-event.c | 25 ++++++++++++++++++++++--- tools/perf/util/probe-file.c | 4 ++++ 2 files changed, 26 insertions(+), 3 deletions(-)
--
Masami Hiramatsu (Linaro) <[email protected]>
PATCH 1/2 perf/probe: Report possible permission error for map__load failure
Report possible permission error including kptr_restrict setting for map__load() failure. This can happen when non-superuser runs perf probe.
With this patch, perf probe shows the following message.
$ perf probe vfs_read Failed to load symbols from /proc/kallsyms Please ensure you can read the /proc/kallsyms symbol addresses. If the /proc/sys/kernel/kptr_restrict is '2', you can not read kernel symbol address even if you are a superuser. Please change it to '1'. If kptr_restrict is '1', the superuser can read the symbol addresses. In that case, please run this command again with sudo. Error: Failed to add events.
--- tools/perf/util/probe-event.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)
tools/perf/util/probe-event.c +22 -3
@@ -2936,7 +2936,7 @@ static int find_probe_functions(struct map *map, char *name,bool cut_version = true;if (map__load (map) <0 ) -return 0 ; +return -EACCES ;/* Possible permission error to load symbols */ /* If user gives a version, don't cut off the version from symbols */ if (strchr (name,'@' ))
@@ -2975,6 +2975,17 @@ void __weak arch__fix_tev_from_maps(struct perf_probe_event *pev __maybe_unused, struct map *map __maybe_unused, struct symbol *sym __maybe_unused) { } + +static void pr_kallsyms_access_error (void ) +{ +pr_err ("Please ensure you can read the /proc/kallsyms symbol addresses.\n" +"If the /proc/sys/kernel/kptr_restrict is '2', you can not read\n" +"kernel symbol address even if you are a superuser. Please change\n" +"it to '1'. If kptr_restrict is '1', the superuser can read the\n" +"symbol addresses.\n" +"In that case, please run this command again with sudo.\n" ); +} +/* * Find probe function addresses from map. * Return an error or the number of found probe_trace_event
@@ -3011,8 +3022,16 @@ static int find_probe_trace_events_from_map(struct perf_probe_event *pev,*/ num_matched_functions =find_probe_functions (map, pp->function, syms);if (num_matched_functions <=0 ) { -pr_err ("Failed to find symbol %s in %s\n" , pp->function, - pev->target ? :"kernel" ); +if (num_matched_functions == -EACCES ) { +pr_err ("Failed to load symbols from %s\n" , + pev->target ?:"/proc/kallsyms" ); +if (pev->target) +pr_err ("Please ensure the file is not stripped.\n" ); +else +pr_kallsyms_access_error (); + }else +pr_err ("Failed to find symbol %s in %s\n" , pp->function, + pev->target ? :"kernel" ); ret = -ENOENT ; goto out; }else if (num_matched_functions > probe_conf.max_probes) {
PATCH 2/2 perf/probe: Report permission error for tracefs error
In reply to Masami HiramatsuReport permission error for the tracefs access error. This can happen when non-superuser runs perf probe. With this patch, perf probe shows the following message.
$ perf probe -l
No permission to access tracefs. Please run this command again with sudo.
Error: Failed to show event list.--- tools/perf/util/probe-file.c | 4 ++++ 1 file changed, 4 insertions(+)
tools/perf/util/probe-file.c +4 -0
@@ -48,6 +48,8 @@ static void print_open_warning(int err, bool uprobe) uprobe ? 'u' : 'k', config); }else if (err == -ENOTSUP )pr_warning ("Tracefs or debugfs is not mounted.\n" ); +else if (err == -EACCES ) +pr_warning ("No permission to access tracefs. Please run this command again with sudo.\n" );else pr_warning("Failed to open %cprobe_events: %s\n", uprobe ? 'u' : 'k',
@@ -62,6 +64,8 @@ static void print_both_open_warning(int kerr, int uerr)else if (kerr == -ENOENT && uerr == -ENOENT )pr_warning ("Please rebuild kernel with CONFIG_KPROBE_EVENTS " "or/and CONFIG_UPROBE_EVENTS.\n" ); +else if (kerr == -EACCES && uerr == -EACCES ) +pr_warning ("No permission to access tracefs. Please run this command again with sudo.\n" );else {char sbuf[STRERR_BUFSIZE ]; pr_warning("Failed to open kprobe events: %s.\n",
Arnaldo Carvalho de Melo
maintainerRe: [PATCH 2/2] perf/probe: Report permission error for tracefs error
Em Sat, Jun 05, 2021 at 12:31:08AM +0900, Masami Hiramatsu escreveu:
Quoted 27 lines
Report permission error for the tracefs access error. This can happen when non-superuser runs perf probe. With this patch, perf probe shows the following message.
$ perf probe -l No permission to access tracefs. Please run this command again with sudo. Error: Failed to show event list.Signed-off-by Masami Hiramatsu <[email protected]>--- tools/perf/util/probe-file.c | 4 ++++ 1 file changed, 4 insertions(+)tools/perf/util/probe-file.c +2
-0@@ -48,6 +48,8 @@ static void print_open_warning(int err, bool uprobe) uprobe ? 'u' : 'k', config); }else if (err == -ENOTSUP )pr_warning ("Tracefs or debugfs is not mounted.\n" ); +else if (err == -EACCES ) +pr_warning ("No permission to access tracefs. Please run this command again with sudo.\n" );else pr_warning("Failed to open %cprobe_events: %s\n", uprobe ? 'u' : 'k',
tools/perf/util/probe-file.c static void print_both_open_warning(int kerr, int uerr) · line 71
Quoted 8 lines
tools/perf/util/probe-file.c +2
-0@@ -62,6 +64,8 @@ static void print_both_open_warning(int kerr, int uerr)else if (kerr == -ENOENT && uerr == -ENOENT )pr_warning ("Please rebuild kernel with CONFIG_KPROBE_EVENTS " "or/and CONFIG_UPROBE_EVENTS.\n" ); +else if (kerr == -EACCES && uerr == -EACCES ) +pr_warning ("No permission to access tracefs. Please run this command again with sudo.\n" );else {char sbuf[STRERR_BUFSIZE ]; pr_warning("Failed to open kprobe events: %s.\n",
This one doesn't look so helpful, as running as root usually will allow things to proceed.
'perf trace' does:
⬢[acme@toolbox pahole]$ perf trace ls
Error: No permissions to read /sys/kernel/tracing/events/raw_syscalls/sys_(enter|exit)
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/tracing/'
⬢[acme@toolbox pahole]$
Which would be less drastic than requiring full superuser access.
- Arnaldo
Re: [PATCH 1/2] perf/probe: Report possible permission error for map__load failure
In reply to Masami HiramatsuEm Sat, Jun 05, 2021 at 12:30:58AM +0900, Masami Hiramatsu escreveu:
Quoted 6 lines
Report possible permission error including
kptr_restrictsetting formap__load()failure. This can happen when non-superuser runs perf probe.With this patch, perf probe shows the following message.
Quoted 9 lines
$ perf probe vfs_read Failed to load symbols from /proc/kallsyms Please ensure you can read the /proc/kallsyms symbol addresses. If the /proc/sys/kernel/kptr_restrict is '2', you can not read kernel symbol address even if you are a superuser. Please change it to '1'. If kptr_restrict is '1', the superuser can read the symbol addresses. In that case, please run this command again with sudo. Error: Failed to add events.
Thanks, applied.
- Arnaldo
Quoted 56 lines
Signed-off-by Masami Hiramatsu <[email protected]>--- tools/perf/util/probe-event.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)tools/perf/util/probe-event.c +22
-3@@ -2936,7 +2936,7 @@ static int find_probe_functions(struct map *map, char *name,bool cut_version = true;if (map__load (map) <0 ) -return 0 ; +return -EACCES ;/* Possible permission error to load symbols */ /* If user gives a version, don't cut off the version from symbols */ if (strchr (name,'@' ))@@ -2975,6 +2975,17 @@ void __weak arch__fix_tev_from_maps(struct perf_probe_event *pev __maybe_unused, struct map *map __maybe_unused, struct symbol *sym __maybe_unused) { } + +static void pr_kallsyms_access_error (void ) +{ +pr_err ("Please ensure you can read the /proc/kallsyms symbol addresses.\n" +"If the /proc/sys/kernel/kptr_restrict is '2', you can not read\n" +"kernel symbol address even if you are a superuser. Please change\n" +"it to '1'. If kptr_restrict is '1', the superuser can read the\n" +"symbol addresses.\n" +"In that case, please run this command again with sudo.\n" ); +} +/* * Find probe function addresses from map. * Return an error or the number of found probe_trace_event @@ -3011,8 +3022,16 @@ static int find_probe_trace_events_from_map(struct perf_probe_event *pev,*/ num_matched_functions =find_probe_functions (map, pp->function, syms);if (num_matched_functions <=0 ) { -pr_err ("Failed to find symbol %s in %s\n" , pp->function, - pev->target ? :"kernel" ); +if (num_matched_functions == -EACCES ) { +pr_err ("Failed to load symbols from %s\n" , + pev->target ?:"/proc/kallsyms" ); +if (pev->target) +pr_err ("Please ensure the file is not stripped.\n" ); +else +pr_kallsyms_access_error (); + }else +pr_err ("Failed to find symbol %s in %s\n" , pp->function, + pev->target ? :"kernel" ); ret = -ENOENT ; goto out; }else if (num_matched_functions > probe_conf.max_probes) {
Signature · 1 line
- Arnaldo
Re: [PATCH 2/2] perf/probe: Report permission error for tracefs error
In reply to Arnaldo Carvalho de MeloHi Arnaldo,
Quoted 42 lines · On Fri, 4 Jun 2021 16:18:34 -0300 Arnaldo Carvalho de Melo <[email protected]>…
Em Sat, Jun 05, 2021 at 12:31:08AM +0900, Masami Hiramatsu escreveu:
Quoted 27 lines
Report permission error for the tracefs access error. This can happen when non-superuser runs perf probe. With this patch, perf probe shows the following message.
$ perf probe -l No permission to access tracefs. Please run this command again with sudo. Error: Failed to show event list.Signed-off-by Masami Hiramatsu <[email protected]>--- tools/perf/util/probe-file.c | 4 ++++ 1 file changed, 4 insertions(+)tools/perf/util/probe-file.c +2
-0@@ -48,6 +48,8 @@ static void print_open_warning(int err, bool uprobe) uprobe ? 'u' : 'k', config); }else if (err == -ENOTSUP )pr_warning ("Tracefs or debugfs is not mounted.\n" ); +else if (err == -EACCES ) +pr_warning ("No permission to access tracefs. Please run this command again with sudo.\n" );else pr_warning("Failed to open %cprobe_events: %s\n", uprobe ? 'u' : 'k',tools/perf/util/probe-file.c static void print_both_open_warning(int kerr, int uerr) · line 71
Quoted 8 lines
tools/perf/util/probe-file.c +2
-0@@ -62,6 +64,8 @@ static void print_both_open_warning(int kerr, int uerr)else if (kerr == -ENOENT && uerr == -ENOENT )pr_warning ("Please rebuild kernel with CONFIG_KPROBE_EVENTS " "or/and CONFIG_UPROBE_EVENTS.\n" ); +else if (kerr == -EACCES && uerr == -EACCES ) +pr_warning ("No permission to access tracefs. Please run this command again with sudo.\n" );else {char sbuf[STRERR_BUFSIZE ]; pr_warning("Failed to open kprobe events: %s.\n",This one doesn't look so helpful, as running as root usually will allow things to proceed.
'perf trace' does:
Quoted 7 lines
⬢[acme@toolbox pahole]$ perf trace ls
Error: No permissions to read /sys/kernel/tracing/events/raw_syscalls/sys_(enter|exit)
Hint: Try 'sudo mount -o remount,mode=755/sys/kernel/tracing/'⬢[acme@toolbox pahole]$
Which would be less drastic than requiring full superuser access.
Hmm, perf trace only read access to the tracefs, so that is easy to suggest user to do remount it. However, perf probe usually requires a write access. (Only perf probe -l requires read access)
I'll change this patch to check whether the read or write access and switch the message. But if it is a write access, anyway it has to requests superuser.
Let me update this patch.
Thank you,
Quoted 2 lines
- Arnaldo
Signature · 1 line
Masami Hiramatsu <[email protected]>
Namhyung Kim
maintainerRe: [PATCH 1/2] perf/probe: Report possible permission error for map__load failure
In reply to Arnaldo Carvalho de MeloHi Arnaldo and Masami,
Quoted 17 lines · Arnaldo Carvalho de Melo
Em Sat, Jun 05, 2021 at 12:30:58AM +0900, Masami Hiramatsu escreveu:
Quoted 15 lines
Report possible permission error including
kptr_restrictsetting formap__load()failure. This can happen when non-superuser runs perf probe.With this patch, perf probe shows the following message.
$ perf probe vfs_read Failed to load symbols from /proc/kallsyms Please ensure you can read the /proc/kallsyms symbol addresses. If the /proc/sys/kernel/kptr_restrict is '2', you can not read kernel symbol address even if you are a superuser. Please change it to '1'. If kptr_restrict is '1', the superuser can read the symbol addresses. In that case, please run this command again with sudo. Error: Failed to add events.
Maybe we can read the kptr_restrict file and (e)uid to suggest the specific message for the situation only.
Thanks,
Namhyung
Quoted 62 lines
Quoted 48 lines
Signed-off-by Masami Hiramatsu <[email protected]>--- tools/perf/util/probe-event.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)tools/perf/util/probe-event.c +15
-3@@ -2936,7 +2936,7 @@ static int find_probe_functions(struct map *map, char *name,bool cut_version = true;if (map__load (map) <0 ) -return 0 ; +return -EACCES ;/* Possible permission error to load symbols */ /* If user gives a version, don't cut off the version from symbols */ if (strchr (name,'@' ))@@ -2975,6 +2975,17 @@ void __weak arch__fix_tev_from_maps(struct perf_probe_event *pev __maybe_unused, struct map *map __maybe_unused, struct symbol *sym __maybe_unused) { } + +static void pr_kallsyms_access_error (void ) +{ +pr_err ("Please ensure you can read the /proc/kallsyms symbol addresses.\n" +"If the /proc/sys/kernel/kptr_restrict is '2', you can not read\n" +"kernel symbol address even if you are a superuser. Please change\n" +"it to '1'. If kptr_restrict is '1', the superuser can read the\n" +"symbol addresses.\n" +"In that case, please run this command again with sudo.\n" ); +} +/* * Find probe function addresses from map. * Return an error or the number of found probe_trace_event @@ -3011,8 +3022,16 @@ static int find_probe_trace_events_from_map(struct perf_probe_event *pev,*/ num_matched_functions =find_probe_functions (map, pp->function, syms);if (num_matched_functions <=0 ) { -pr_err ("Failed to find symbol %s in %s\n" , pp->function, - pev->target ? :"kernel" ); +if (num_matched_functions == -EACCES ) { +pr_err ("Failed to load symbols from %s\n" , + pev->target ?:"/proc/kallsyms" );tools/perf/util/probe-event.c static int find_probe_trace_events_from_map(struct perf_probe_event *pev, · line 3037
Quoted 10 lines
tools/perf/util/probe-event.c +7
-0+if (pev->target) +pr_err ("Please ensure the file is not stripped.\n" ); +else +pr_kallsyms_access_error (); + }else +pr_err ("Failed to find symbol %s in %s\n" , pp->function, + pev->target ? :"kernel" ); ret = -ENOENT ; goto out; }else if (num_matched_functions > probe_conf.max_probes) {--
- Arnaldo
PATCH v2 1/1 perf/probe: Report permission error for tracefs access
In reply to Masami HiramatsuReport permission error for the tracefs open and rewrite whole the error message code around it.
You'll see a hint according to what you want to do with perf probe as below.
$ perf probe -l
No permission to read tracefs.
Please try 'sudo mount -o remount,mode=755 /sys/kernel/tracing/'
Error: Failed to show event list. $ perf probe -d \*
No permission to write tracefs.
Please run this command again with sudo.
Error: Failed to delete events.This also fixes -ENOTSUP checking for mounting tracefs/debugfs. Actually open returns -ENOENT in that case and we have to check it with current mount point list. If we unmount debugfs and tracefs perf probe shows correct message as below.
$ perf probe -l
Debugfs or tracefs is not mounted
Please try 'sudo mount -t tracefs nodev /sys/kernel/tracing/'
Error: Failed to show event list.---
Changes in v2:
- Rewrite whole the error message for the tracefs access.
--- tools/perf/util/probe-file.c | 95 +++++++++++++++++++++++++++++------------- 1 file changed, 65 insertions(+), 30 deletions(-)
tools/perf/util/probe-file.c +65 -30
@@ -22,6 +22,7 @@#include "symbol.h" #include "strbuf.h" #include <api/fs/tracing_path.h> +#include <api/fs/fs.h> #include "probe-event.h" #include "probe-file.h" #include "session.h"
@@ -31,44 +32,78 @@/* 4096 - 2 ('\n' + '\0') */ #define MAX_CMDLEN 4094 -static void print_open_warning (int err,bool uprobe) +static bool print_common_warning (int err,bool readwrite) { -char sbuf[STRERR_BUFSIZE ]; +if (err == -EACCES ) +pr_warning ("No permission to %s tracefs.\nPlease %s\n" , + readwrite ?"write" :"read" , + readwrite ?"run this command again with sudo." : +"try 'sudo mount -o remount,mode=755 /sys/kernel/tracing/'" ); +else +return false; -if (err == -ENOENT ) { -const char *config; +return true; +} -if (uprobe) - config ="CONFIG_UPROBE_EVENTS" ; -else - config ="CONFIG_KPROBE_EVENTS" ; +static bool print_configure_probe_event (int kerr,int uerr) +{ +const char *config, *file; + +if (kerr == -ENOENT && uerr == -ENOENT ) { + file ="{k,u}probe_events" ; + config ="CONFIG_KPROBE_EVENTS=y and CONFIG_UPROBE_EVENTS=y" ; + }else if (kerr == -ENOENT ) { + file ="kprobe_events" ; + config ="CONFIG_KPROBE_EVENTS=y" ; + }else if (uerr == -ENOENT ) { + file ="uprobe_events" ; + config ="CONFIG_UPROBE_EVENTS=y" ; + }else +return false; -pr_warning ("%cprobe_events file does not exist" -" - please rebuild kernel with %s.\n" , - uprobe ?'u' :'k' , config); - }else if (err == -ENOTSUP ) -pr_warning ("Tracefs or debugfs is not mounted.\n" ); +if (!debugfs__configured () && !tracefs__configured ()) +pr_warning ("Debugfs or tracefs is not mounted\n" +"Please try 'sudo mount -t tracefs nodev /sys/kernel/tracing/'\n" );else -pr_warning ("Failed to open %cprobe_events: %s\n" , - uprobe ?'u' :'k' , -str_error_r (-err, sbuf,sizeof (sbuf))); +pr_warning ("%s/%s does not exist.\nPlease rebuild kernel with %s.\n" , +tracing_path_mount (), file, config); + +return true; +} + +static void print_open_warning (int err,bool uprobe,bool readwrite) +{ +char sbuf[STRERR_BUFSIZE ]; + +if (print_common_warning (err, readwrite)) +return ; + +if (print_configure_probe_event (uprobe ?0 : err, uprobe ? err :0 )) +return ; + +pr_warning ("Failed to open %s/%cprobe_events: %s\n" , +tracing_path_mount (), uprobe ?'u' :'k' , +str_error_r (-err, sbuf,sizeof (sbuf))); } -static void print_both_open_warning (int kerr,int uerr) +static void print_both_open_warning (int kerr,int uerr,bool readwrite) { -/* Both kprobes and uprobes are disabled, warn it. */ -if (kerr == -ENOTSUP && uerr == -ENOTSUP ) -pr_warning ("Tracefs or debugfs is not mounted.\n" ); -else if (kerr == -ENOENT && uerr == -ENOENT ) -pr_warning ("Please rebuild kernel with CONFIG_KPROBE_EVENTS " -"or/and CONFIG_UPROBE_EVENTS.\n" ); -else { -char sbuf[STRERR_BUFSIZE ]; -pr_warning ("Failed to open kprobe events: %s.\n" , +char sbuf[STRERR_BUFSIZE ]; + +if (kerr == uerr &&print_common_warning (kerr, readwrite)) +return ; + +if (print_configure_probe_event (kerr, uerr)) +return ; + +if (kerr <0 ) +pr_warning ("Failed to open %s/kprobe_events: %s.\n" , +tracing_path_mount (),str_error_r (-kerr, sbuf,sizeof (sbuf))); -pr_warning ("Failed to open uprobe events: %s.\n" , +if (uerr <0 ) +pr_warning ("Failed to open %s/uprobe_events: %s.\n" , +tracing_path_mount (),str_error_r (-uerr, sbuf,sizeof (sbuf))); - } }int open_trace_file (const char *trace_file,bool readwrite)
@@ -109,7 +144,7 @@ int probe_file__open(int flag)else fd =open_kprobe_events (flag &PF_FL_RW );if (fd <0 ) -print_open_warning (fd, flag &PF_FL_UPROBE ); +print_open_warning (fd, flag &PF_FL_UPROBE , flag &PF_FL_RW );return fd; }
@@ -122,7 +157,7 @@ int probe_file__open_both(int *kfd, int *ufd, int flag) *kfd =open_kprobe_events (flag &PF_FL_RW ); *ufd =open_uprobe_events (flag &PF_FL_RW );if (*kfd <0 && *ufd <0 ) { -print_both_open_warning (*kfd, *ufd); +print_both_open_warning (*kfd, *ufd, flag &PF_FL_RW );return *kfd; }
Re: [PATCH 1/2] perf/probe: Report possible permission error for map__load failure
In reply to Namhyung KimQuoted 22 lines · On Sun, 6 Jun 2021 00:11:31 -0700 Namhyung Kim <[email protected]> wrote:
Hi Arnaldo and Masami,
Quoted 17 lines · Arnaldo Carvalho de Melo
Em Sat, Jun 05, 2021 at 12:30:58AM +0900, Masami Hiramatsu escreveu:
Quoted 15 lines
Report possible permission error including
kptr_restrictsetting formap__load()failure. This can happen when non-superuser runs perf probe.With this patch, perf probe shows the following message.
$ perf probe vfs_read Failed to load symbols from /proc/kallsyms Please ensure you can read the /proc/kallsyms symbol addresses. If the /proc/sys/kernel/kptr_restrict is '2', you can not read kernel symbol address even if you are a superuser. Please change it to '1'. If kptr_restrict is '1', the superuser can read the symbol addresses. In that case, please run this command again with sudo. Error: Failed to add events.
Quoted 2 lines
Maybe we can read the
kptr_restrictfile and (e)uid to suggest the specific message for the situation only.
Agreed, and that should be done in map__load(), since it returns -1 for any error. Caller needs to estimate the reason.
If each caller does it, those have to repeat same estimation and similar messages in different place. Maybe we need to have a global error and hint object so that caller can show it when it detects an error.
Thank you,
Quoted 65 lines
Thanks,
NamhyungQuoted 62 lines
Quoted 48 lines
Signed-off-by Masami Hiramatsu <[email protected]>--- tools/perf/util/probe-event.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)tools/perf/util/probe-event.c +15
-3@@ -2936,7 +2936,7 @@ static int find_probe_functions(struct map *map, char *name,bool cut_version = true;if (map__load (map) <0 ) -return 0 ; +return -EACCES ;/* Possible permission error to load symbols */ /* If user gives a version, don't cut off the version from symbols */ if (strchr (name,'@' ))@@ -2975,6 +2975,17 @@ void __weak arch__fix_tev_from_maps(struct perf_probe_event *pev __maybe_unused, struct map *map __maybe_unused, struct symbol *sym __maybe_unused) { } + +static void pr_kallsyms_access_error (void ) +{ +pr_err ("Please ensure you can read the /proc/kallsyms symbol addresses.\n" +"If the /proc/sys/kernel/kptr_restrict is '2', you can not read\n" +"kernel symbol address even if you are a superuser. Please change\n" +"it to '1'. If kptr_restrict is '1', the superuser can read the\n" +"symbol addresses.\n" +"In that case, please run this command again with sudo.\n" ); +} +/* * Find probe function addresses from map. * Return an error or the number of found probe_trace_event @@ -3011,8 +3022,16 @@ static int find_probe_trace_events_from_map(struct perf_probe_event *pev,*/ num_matched_functions =find_probe_functions (map, pp->function, syms);if (num_matched_functions <=0 ) { -pr_err ("Failed to find symbol %s in %s\n" , pp->function, - pev->target ? :"kernel" ); +if (num_matched_functions == -EACCES ) { +pr_err ("Failed to load symbols from %s\n" , + pev->target ?:"/proc/kallsyms" );tools/perf/util/probe-event.c static int find_probe_trace_events_from_map(struct perf_probe_event *pev, · line 3037
Quoted 10 lines
tools/perf/util/probe-event.c +7
-0+if (pev->target) +pr_err ("Please ensure the file is not stripped.\n" ); +else +pr_kallsyms_access_error (); + }else +pr_err ("Failed to find symbol %s in %s\n" , pp->function, + pev->target ? :"kernel" ); ret = -ENOENT ; goto out; }else if (num_matched_functions > probe_conf.max_probes) {--
- Arnaldo
Signature · 1 line
Masami Hiramatsu <[email protected]>
Arnaldo Carvalho de Melo
maintainerRe: [PATCH 1/2] perf/probe: Report possible permission error for map__load failure
Em Mon, Jun 07, 2021 at 09:00:34AM +0900, Masami Hiramatsu escreveu:
Quoted 25 lines
Quoted 22 lines · On Sun, 6 Jun 2021 00:11:31 -0700 Namhyung Kim <[email protected]> wrote:
Hi Arnaldo and Masami,
Quoted 17 lines · Arnaldo Carvalho de Melo
Em Sat, Jun 05, 2021 at 12:30:58AM +0900, Masami Hiramatsu escreveu:
Quoted 15 lines
Report possible permission error including
kptr_restrictsetting formap__load()failure. This can happen when non-superuser runs perf probe.With this patch, perf probe shows the following message.
$ perf probe vfs_read Failed to load symbols from /proc/kallsyms Please ensure you can read the /proc/kallsyms symbol addresses. If the /proc/sys/kernel/kptr_restrict is '2', you can not read kernel symbol address even if you are a superuser. Please change it to '1'. If kptr_restrict is '1', the superuser can read the symbol addresses. In that case, please run this command again with sudo. Error: Failed to add events.
Quoted 5 lines
Quoted 2 lines
Maybe we can read the
kptr_restrictfile and (e)uid to suggest the specific message for the situation only.Agreed, and that should be done in
map__load(), since it returns -1 for any error. Caller needs to estimate the reason.
Then we need to change it to return a errno so that the caller can react accordingly.
- Arnaldo
Quoted 77 lines
If each caller does it, those have to repeat same estimation and similar messages in different place. Maybe we need to have a global error and hint object so that caller can show it when it detects an error.
Thank you,
Quoted 65 lines
Thanks,
NamhyungQuoted 62 lines
Quoted 48 lines
Signed-off-by Masami Hiramatsu <[email protected]>--- tools/perf/util/probe-event.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)tools/perf/util/probe-event.c +15
-3@@ -2936,7 +2936,7 @@ static int find_probe_functions(struct map *map, char *name,bool cut_version = true;if (map__load (map) <0 ) -return 0 ; +return -EACCES ;/* Possible permission error to load symbols */ /* If user gives a version, don't cut off the version from symbols */ if (strchr (name,'@' ))@@ -2975,6 +2975,17 @@ void __weak arch__fix_tev_from_maps(struct perf_probe_event *pev __maybe_unused, struct map *map __maybe_unused, struct symbol *sym __maybe_unused) { } + +static void pr_kallsyms_access_error (void ) +{ +pr_err ("Please ensure you can read the /proc/kallsyms symbol addresses.\n" +"If the /proc/sys/kernel/kptr_restrict is '2', you can not read\n" +"kernel symbol address even if you are a superuser. Please change\n" +"it to '1'. If kptr_restrict is '1', the superuser can read the\n" +"symbol addresses.\n" +"In that case, please run this command again with sudo.\n" ); +} +/* * Find probe function addresses from map. * Return an error or the number of found probe_trace_event @@ -3011,8 +3022,16 @@ static int find_probe_trace_events_from_map(struct perf_probe_event *pev,*/ num_matched_functions =find_probe_functions (map, pp->function, syms);if (num_matched_functions <=0 ) { -pr_err ("Failed to find symbol %s in %s\n" , pp->function, - pev->target ? :"kernel" ); +if (num_matched_functions == -EACCES ) { +pr_err ("Failed to load symbols from %s\n" , + pev->target ?:"/proc/kallsyms" );tools/perf/util/probe-event.c static int find_probe_trace_events_from_map(struct perf_probe_event *pev, · line 3037
Quoted 10 lines
tools/perf/util/probe-event.c +7
-0+if (pev->target) +pr_err ("Please ensure the file is not stripped.\n" ); +else +pr_kallsyms_access_error (); + }else +pr_err ("Failed to find symbol %s in %s\n" , pp->function, + pev->target ? :"kernel" ); ret = -ENOENT ; goto out; }else if (num_matched_functions > probe_conf.max_probes) {--
- Arnaldo
Signature · 1 line
Masami Hiramatsu <[email protected]>
Signature · 1 line
- Arnaldo
Re: [PATCH v2] perf/probe: Report permission error for tracefs access
In reply to Masami HiramatsuEm Mon, Jun 07, 2021 at 12:49:28AM +0900, Masami Hiramatsu escreveu:
Quoted 20 lines
Report permission error for the tracefs open and rewrite whole the error message code around it.
You'll see a hint according to what you want to do with perf probe as below.$ perf probe -l No permission to read tracefs. Please try 'sudo mount -o remount,mode=755 /sys/kernel/tracing/' Error: Failed to show event list.$ perf probe -d \* No permission to write tracefs. Please run this command again with sudo. Error: Failed to delete events.This also fixes
-ENOTSUPchecking for mounting tracefs/debugfs. Actually open returns-ENOENTin that case and we have to check it with current mount point list. If we unmount debugfs and tracefs perf probe shows correct message as below.
Quoted 4 lines
$ perf probe -l
Debugfs or tracefs is not mounted
Please try 'sudo mount -t tracefs nodev /sys/kernel/tracing/'
Error: Failed to show event list.Thanks, applied.
- Arnaldo
Quoted 147 lines
Signed-off-by Masami Hiramatsu <[email protected]>---
Changes in v2:
- Rewrite whole the error message for the tracefs access.--- tools/perf/util/probe-file.c | 95 +++++++++++++++++++++++++++++------------- 1 file changed, 65 insertions(+), 30 deletions(-)tools/perf/util/probe-file.c +65
-30@@ -22,6 +22,7 @@#include "symbol.h" #include "strbuf.h" #include <api/fs/tracing_path.h> +#include <api/fs/fs.h> #include "probe-event.h" #include "probe-file.h" #include "session.h" @@ -31,44 +32,78 @@/* 4096 - 2 ('\n' + '\0') */ #define MAX_CMDLEN 4094 -static void print_open_warning (int err,bool uprobe) +static bool print_common_warning (int err,bool readwrite) { -char sbuf[STRERR_BUFSIZE ]; +if (err == -EACCES ) +pr_warning ("No permission to %s tracefs.\nPlease %s\n" , + readwrite ?"write" :"read" , + readwrite ?"run this command again with sudo." : +"try 'sudo mount -o remount,mode=755 /sys/kernel/tracing/'" ); +else +return false; -if (err == -ENOENT ) { -const char *config; +return true; +} -if (uprobe) - config ="CONFIG_UPROBE_EVENTS" ; -else - config ="CONFIG_KPROBE_EVENTS" ; +static bool print_configure_probe_event (int kerr,int uerr) +{ +const char *config, *file; + +if (kerr == -ENOENT && uerr == -ENOENT ) { + file ="{k,u}probe_events" ; + config ="CONFIG_KPROBE_EVENTS=y and CONFIG_UPROBE_EVENTS=y" ; + }else if (kerr == -ENOENT ) { + file ="kprobe_events" ; + config ="CONFIG_KPROBE_EVENTS=y" ; + }else if (uerr == -ENOENT ) { + file ="uprobe_events" ; + config ="CONFIG_UPROBE_EVENTS=y" ; + }else +return false; -pr_warning ("%cprobe_events file does not exist" -" - please rebuild kernel with %s.\n" , - uprobe ?'u' :'k' , config); - }else if (err == -ENOTSUP ) -pr_warning ("Tracefs or debugfs is not mounted.\n" ); +if (!debugfs__configured () && !tracefs__configured ()) +pr_warning ("Debugfs or tracefs is not mounted\n" +"Please try 'sudo mount -t tracefs nodev /sys/kernel/tracing/'\n" );else -pr_warning ("Failed to open %cprobe_events: %s\n" , - uprobe ?'u' :'k' , -str_error_r (-err, sbuf,sizeof (sbuf))); +pr_warning ("%s/%s does not exist.\nPlease rebuild kernel with %s.\n" , +tracing_path_mount (), file, config); + +return true; +} + +static void print_open_warning (int err,bool uprobe,bool readwrite) +{ +char sbuf[STRERR_BUFSIZE ]; + +if (print_common_warning (err, readwrite)) +return ; + +if (print_configure_probe_event (uprobe ?0 : err, uprobe ? err :0 )) +return ; + +pr_warning ("Failed to open %s/%cprobe_events: %s\n" , +tracing_path_mount (), uprobe ?'u' :'k' , +str_error_r (-err, sbuf,sizeof (sbuf))); } -static void print_both_open_warning (int kerr,int uerr) +static void print_both_open_warning (int kerr,int uerr,bool readwrite) { -/* Both kprobes and uprobes are disabled, warn it. */ -if (kerr == -ENOTSUP && uerr == -ENOTSUP ) -pr_warning ("Tracefs or debugfs is not mounted.\n" ); -else if (kerr == -ENOENT && uerr == -ENOENT ) -pr_warning ("Please rebuild kernel with CONFIG_KPROBE_EVENTS " -"or/and CONFIG_UPROBE_EVENTS.\n" ); -else { -char sbuf[STRERR_BUFSIZE ]; -pr_warning ("Failed to open kprobe events: %s.\n" , +char sbuf[STRERR_BUFSIZE ]; + +if (kerr == uerr &&print_common_warning (kerr, readwrite)) +return ; + +if (print_configure_probe_event (kerr, uerr)) +return ; + +if (kerr <0 ) +pr_warning ("Failed to open %s/kprobe_events: %s.\n" , +tracing_path_mount (),str_error_r (-kerr, sbuf,sizeof (sbuf))); -pr_warning ("Failed to open uprobe events: %s.\n" , +if (uerr <0 ) +pr_warning ("Failed to open %s/uprobe_events: %s.\n" , +tracing_path_mount (),str_error_r (-uerr, sbuf,sizeof (sbuf))); - } }int open_trace_file (const char *trace_file,bool readwrite)@@ -109,7 +144,7 @@ int probe_file__open(int flag)else fd =open_kprobe_events (flag &PF_FL_RW );if (fd <0 ) -print_open_warning (fd, flag &PF_FL_UPROBE ); +print_open_warning (fd, flag &PF_FL_UPROBE , flag &PF_FL_RW );return fd; }@@ -122,7 +157,7 @@ int probe_file__open_both(int *kfd, int *ufd, int flag) *kfd =open_kprobe_events (flag &PF_FL_RW ); *ufd =open_uprobe_events (flag &PF_FL_RW );if (*kfd <0 && *ufd <0 ) { -print_both_open_warning (*kfd, *ufd); +print_both_open_warning (*kfd, *ufd, flag &PF_FL_RW );return *kfd; }
Signature · 1 line
- Arnaldo