Skip to contentSkip to conversation

FAILED: patch "[PATCH] usb: cdns3: Enable TDL_CHK only for OUT ep" failed to apply to 5.10-stable tree

PATCH [email protected] 1 participant 1 message Jun 13, 2021

Subsystems (3)
Stable branch USB Cadence USB3 DRD IP driver
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From d6eef886903c4bb5af41b9a31d4ba11dc7a6f8e8 Mon Sep 17 00:00:00 2001
From: Sanket Parmar <[email protected]>
Date: Mon, 17 May 2021 17:05:12 +0200
Subject: [PATCH] usb: cdns3: Enable TDL_CHK only for OUT ep

ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used as TDL source for IN endpoints. To fix it, TDL_CHK is only enabled for OUT endpoints.

Fixes 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reported-by Aswath Govindraju <[email protected]>
Signed-off-by Sanket Parmar <[email protected]>
Link https://lore.kernel.org/r/[email protected] open here
Signed-off-by Peter Chen <[email protected]>
drivers/usb/cdns3/cdns3-gadget.c +3 -5
index a8b7b50abf64..5281f8d3fb3d 100644
@@ -2007,7 +2007,7 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
 		else
 			mask = BIT(priv_ep->num);
 
-		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir) {
 			cdns3_set_register_bit(&regs->tdl_from_trb, mask);
 			cdns3_set_register_bit(&regs->tdl_beh, mask);
 			cdns3_set_register_bit(&regs->tdl_beh2, mask);

@@ -2046,15 +2046,13 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable)
 	case USB_ENDPOINT_XFER_INT:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	case USB_ENDPOINT_XFER_BULK:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2  && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	default: