Skip to contentSkip to conversation

mmc: sdhci: Update the software timeout value for sdhc

PATCH Superseded Shaik Sajida Bhanu 5 participants 5 messages Jun 16, 2021 – Jun 21, 2021

Subsystems (3)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mmc: sdhci: Update the software timeout value for sdhc

Whenever SDHC run at clock rate 50MHZ or below, the hardware data timeout value will be 21.47secs, which is approx. 22secs and we have a current software timeout value as 10secs. We have to set software timeout value more than the hardware data timeout value to avioid seeing the below register dumps.

[  332.953670] mmc2: Timeout waiting for hardware interrupt.
[  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  0x00007202
[  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000001
[  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 0x00000027
[  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 0x0000001f
[  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
[  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
[  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 0x03ff100b
[  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x0000808f
[  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 0x00000000
[  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
[  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
[  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
0x0000000ffffff218
[  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
-----------
[  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c | DLL cfg2: 0x0020a000
[  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00000000 | DDR cfg: 0x80040873
[  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040
[  333.102371] mmc2: sdhci: ============================================

So, set software timeout value more than hardware timeout value.

---
 drivers/mmc/host/sdhci.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci.c +8 -1
index bf238ad..1386f7d 100644
@@ -1670,7 +1670,14 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	else if (!cmd->data && cmd->busy_timeout > 9000)
 		timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
 	else
-		timeout += 10 * HZ;
+	       /*
+		* In some of the conditions hardware data timeout value could be
+		* approx 21.5 seconds and driver is setting software data timeout
+		* value less than the hardware data timeout value and software data
+		* timeout value should be more than the hardware data timeout value.
+		* So, set software data timeout value more than 21.5 sec i.e. 22sec.
+		*/
+		timeout += 22 * HZ;
 	sdhci_mod_timer(host, cmd->mrq, timeout);
 
 	if (host->use_external_dma)
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation
#1 lore raw

Hi,

I am not sure which SoC is this change supposed to address, but it does not fix the longstanding issue of a similar kind on msm8996:

[   25.448575] mmc0: Timeout waiting for hardware interrupt. [   25.464270] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========

[   25.479768] mmc0: sdhci: Sys addr:  0x00000008 | Version:  0x00004902
[   25.495361] mmc0: sdhci: Blk size:  0x00004200 | Blk cnt:  0x00000006
[   25.510963] mmc0: sdhci: Argument:  0x01cd9f80 | Trn mode: 0x0000003b

[   25.526517] mmc0: sdhci: Present:   0x03f80206 | Host ctl: 0x0000001f
[   25.542178] mmc0: sdhci: Power:     0x0000000d | Blk gap:  0x00000000
[   25.557767] mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[   25.573427] mmc0: sdhci: Timeout:   0x0000000a | Int stat: 0x00000000
[   25.588983] mmc0: sdhci: Int enab:  0x03ff900b | Sig enab: 0x03ff100b
[   25.604645] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[   25.620273] mmc0: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x00008007
[   25.635752] mmc0: sdhci: Cmd:       0x0000123a | Max curr: 0x00000000
[   25.651351] mmc0: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x5b590000
[   25.666879] mmc0: sdhci: Resp[2]:   0x73677f80 | Resp[3]:  0x00000900
[   25.682496] mmc0: sdhci: Host ctl2: 0x0000000c
[   25.697991] mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x0000000101cd2200
[   25.713751] mmc0: sdhci_msm: ----------- VENDOR REGISTER DUMP -----------
[   25.729510] mmc0: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:  0x6008642c | DLL cfg2: 0x0020a000 [   25.745564] mmc0: sdhci_msm: DLL cfg3: 0x00000008 | DLL usr ctl:  0x00000008 | DDR cfg: 0x80040873 [   25.761759] mmc0: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xfa8018a8 Vndr func3: 0x00024040 [   25.778080] mmc0: sdhci: ============================================
[   25.894360] mmc0: Reset 0x4 never completed.
[   25.910719] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========

[   25.927143] mmc0: sdhci: Sys addr:  0x00000008 | Version:  0x00004902
[   25.943717] mmc0: sdhci: Blk size:  0x00004200 | Blk cnt:  0x00000006
[   25.960225] mmc0: sdhci: Argument:  0x01cd9f80 | Trn mode: 0x0000003b

[   25.976845] mmc0: sdhci: Present:   0x03f80206 | Host ctl: 0x0000001f
[   25.993490] mmc0: sdhci: Power:     0x0000000d | Blk gap:  0x00000000
[   26.010019] mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[   26.026693] mmc0: sdhci: Timeout:   0x0000000a | Int stat: 0x00000000
[   26.043262] mmc0: sdhci: Int enab:  0x03ff900b | Sig enab: 0x03ff100b
[   26.059955] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[   26.076546] mmc0: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x00008007
[   26.093229] mmc0: sdhci: Cmd:       0x0000123a | Max curr: 0x00000000
[   26.109783] mmc0: sdhci: Resp[0]:   0x00000000 | Resp[1]:  0x00000000
[   26.126074] mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[   26.142271] mmc0: sdhci: Host ctl2: 0x0000000c
[   26.158161] mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x0000000101cd2200
[   26.174287] mmc0: sdhci_msm: ----------- VENDOR REGISTER DUMP -----------
[   26.190295] mmc0: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:  0x6008642c | DLL cfg2: 0x0020a000 [   26.206518] mmc0: sdhci_msm: DLL cfg3: 0x00000008 | DLL usr ctl:  0x00000008 | DDR cfg: 0x80040873 [   26.222916] mmc0: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xfa8018a8 Vndr func3: 0x00024040 [   26.239484] mmc0: sdhci: ============================================

Konrad

#2 lore raw
In reply to Shaik Sajida Bhanu
Quoted 48 lines · Shaik Sajida Bhanu

Whenever SDHC run at clock rate 50MHZ or below, the hardware data timeout value will be 21.47secs, which is approx. 22secs and we have a current software timeout value as 10secs. We have to set software timeout value more than the hardware data timeout value to avioid seeing the below register dumps.

[  332.953670] mmc2: Timeout waiting for hardware interrupt.
[  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  0x00007202
[  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000001
[  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 0x00000027
[  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 0x0000001f
[  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
[  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
[  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 0x03ff100b
[  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x0000808f
[  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 0x00000000
[  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
[  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
[  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
0x0000000ffffff218
[  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
-----------
[  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c | DLL cfg2: 0x0020a000
[  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00000000 | DDR cfg: 0x80040873
[  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040
[  333.102371] mmc2: sdhci: ============================================

So, set software timeout value more than hardware timeout value.

---
  drivers/mmc/host/sdhci.c | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci.c +0 -0
index bf238ad..1386f7d 100644
@@ -1670,7 +1670,14 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
  	else if (!cmd->data && cmd->busy_timeout > 9000)
  		timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;

drivers/mmc/host/sdhci.c static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) · line 1680

Quoted 10 lines
drivers/mmc/host/sdhci.c +8 -1
  	else
-		timeout += 10 * HZ;
+	       /*
+		* In some of the conditions hardware data timeout value could be
+		* approx 21.5 seconds and driver is setting software data timeout
+		* value less than the hardware data timeout value and software data
+		* timeout value should be more than the hardware data timeout value.
+		* So, set software data timeout value more than 21.5 sec i.e. 22sec.
+		*/
+		timeout += 22 * HZ;

This timeout is qcom SDHC specific.
I think right way is to, define your own set_timeout op and update host->data_timeout in that as per qcom SDHC requirements.

Quoted 3 lines
drivers/mmc/host/sdhci.c +0 -0
  	sdhci_mod_timer(host, cmd->mrq, timeout);
 
  	if (host->use_external_dma)
#3 lore raw

Hi,

Quoted 58 lines · Veerabhadrarao Badiganti
Quoted 55 lines · Shaik Sajida Bhanu

Whenever SDHC run at clock rate 50MHZ or below, the hardware data timeout value will be 21.47secs, which is approx. 22secs and we have a current software timeout value as 10secs. We have to set software timeout value more than the hardware data timeout value to avioid seeing the below register dumps.

[  332.953670] mmc2: Timeout waiting for hardware interrupt.
[  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  0x00007202
[  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000001
[  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 0x00000027
[  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 0x0000001f
[  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
[  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
[  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 0x03ff100b
[  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x0000808f
[  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 0x00000000
[  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
[  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
[  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
0x0000000ffffff218
[  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
-----------
[  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c | DLL cfg2: 0x0020a000
[  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00000000 | DDR cfg: 0x80040873
[  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040
[  333.102371] mmc2: sdhci: ============================================

So, set software timeout value more than hardware timeout value.

---
  drivers/mmc/host/sdhci.c | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci.c +5 -1
index bf238ad..1386f7d 100644
@@ -1670,7 +1670,14 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
      else if (!cmd->data && cmd->busy_timeout > 9000)
              timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
      else
-             timeout += 10 * HZ;
+            /*
+             * In some of the conditions hardware data timeout value could be
+             * approx 21.5 seconds and driver is setting software data timeout
+             * value less than the hardware data timeout value and software data
+             * timeout value should be more than the hardware data timeout value.
Quoted 8 lines

drivers/mmc/host/sdhci.c static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) · line 1680

Quoted 3 lines
drivers/mmc/host/sdhci.c +3 -0
+             * So, set software data timeout value more than 21.5 sec i.e. 22sec.
+             */
+             timeout += 22 * HZ;

This timeout is qcom SDHC specific.
I think right way is to, define your own set_timeout op and update host->data_timeout
in that as per qcom SDHC requirements.

It is? Off-thread Shaik was indicating that the problem had to do with the inaccuracy of the "SDHCI_TIMEOUT_CONTROL" register. That seems to be in the common SDHCI code. Specifically looking at sdhci_calc_timeout() it can be seen that the possible hardware values for the timeout double each time, so if you need a hardware timeout that's slightly higher than one of the possible values you might end up with a hardware timeout that's almost double what you want.

Assuming that the problem actually is with the inaccuracy of SDHCI_TIMEOUT_CONTROL (I didn't walk through and validate), it actually seems like we should generally be doubling the value we were programming for the software timeout (in other words, not just ones that are <= 9 seconds). I haven't done all the math, but I presume the reason that we need 22 instead of 20 is some type of extra fudge factor somewhere?

Maybe the only reason that Qualcomm hits this is due to the PLL that's sourcing the SDHCI controller at a non-standard rate?

I suppose another reason maybe why people aren't hitting it is just the random chance of what rate the integer overflow in mmc_set_data_timeout() leaves you at? I pointed this out to Shiak and was hoping a patch would be included for that, but I can always try to write one later if not. To be concrete, I have card->csd.taac_ns=5000000 and card->csd.r2w_factor=5. Multiplying things out (and accounting for mult=100 for SD cards), I end up with a timeout_ns of 0x3b9aca000 (16 seconds) which doesn't fit in the 32-bit data->timeout_ns earlier. The truncation was making it look like the card requested a max timeout of 3,115,098,112 ns = ~3.1 seconds.

-Doug

maintainer
#4 lore raw
Quoted 90 lines · Doug Anderson

Hi,

Quoted 58 lines · Veerabhadrarao Badiganti
Quoted 55 lines · Shaik Sajida Bhanu

Whenever SDHC run at clock rate 50MHZ or below, the hardware data timeout value will be 21.47secs, which is approx. 22secs and we have a current software timeout value as 10secs. We have to set software timeout value more than the hardware data timeout value to avioid seeing the below register dumps.

[  332.953670] mmc2: Timeout waiting for hardware interrupt.
[  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  0x00007202
[  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000001
[  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 0x00000027
[  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 0x0000001f
[  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
[  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
[  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 0x03ff100b
[  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x0000808f
[  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 0x00000000
[  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
[  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
[  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
0x0000000ffffff218
[  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
-----------
[  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c | DLL cfg2: 0x0020a000
[  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00000000 | DDR cfg: 0x80040873
[  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040
[  333.102371] mmc2: sdhci: ============================================

So, set software timeout value more than hardware timeout value.

---
  drivers/mmc/host/sdhci.c | 9 ++++++++-
  1 file changed, 8 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci.c +5 -1
index bf238ad..1386f7d 100644
@@ -1670,7 +1670,14 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
      else if (!cmd->data && cmd->busy_timeout > 9000)
              timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
      else
-             timeout += 10 * HZ;
+            /*
+             * In some of the conditions hardware data timeout value could be
+             * approx 21.5 seconds and driver is setting software data timeout
+             * value less than the hardware data timeout value and software data
+             * timeout value should be more than the hardware data timeout value.
Quoted 8 lines

drivers/mmc/host/sdhci.c static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) · line 1680

Quoted 3 lines
drivers/mmc/host/sdhci.c +3 -0
+             * So, set software data timeout value more than 21.5 sec i.e. 22sec.
+             */
+             timeout += 22 * HZ;

This timeout is qcom SDHC specific.
I think right way is to, define your own set_timeout op and update host->data_timeout
in that as per qcom SDHC requirements.

It is? Off-thread Shaik was indicating that the problem had to do with the inaccuracy of the "SDHCI_TIMEOUT_CONTROL" register. That seems to be in the common SDHCI code. Specifically looking at sdhci_calc_timeout() it can be seen that the possible hardware values for the timeout double each time, so if you need a hardware timeout that's slightly higher than one of the possible values you might end up with a hardware timeout that's almost double what you want.

Assuming that the problem actually is with the inaccuracy of SDHCI_TIMEOUT_CONTROL (I didn't walk through and validate), it actually seems like we should generally be doubling the value we were programming for the software timeout (in other words, not just ones that are <= 9 seconds). I haven't done all the math, but I presume the reason that we need 22 instead of 20 is some type of extra fudge factor somewhere?

Maybe the only reason that Qualcomm hits this is due to the PLL that's sourcing the SDHCI controller at a non-standard rate?

Quoted 10 lines

I suppose another reason maybe why people aren't hitting it is just the random chance of what rate the integer overflow in mmc_set_data_timeout() leaves you at? I pointed this out to Shiak and was hoping a patch would be included for that, but I can always try to write one later if not. To be concrete, I have card->csd.taac_ns=5000000 and card->csd.r2w_factor=5. Multiplying things out (and accounting for mult=100 for SD cards), I end up with a timeout_ns of 0x3b9aca000 (16 seconds) which doesn't fit in the 32-bit data->timeout_ns earlier. The truncation was making it look like the card requested a max timeout of 3,115,098,112 ns = ~3.1 seconds.

The software timeout is meant to catch cases where the hardware timeout has failed, but SDHCI also supports a mechanism to use software timeouts when the timeout is too big for the hardware
- refer SDHCI_QUIRK2_DISABLE_HW_TIMEOUT and sdhci_calc_sw_timeout()

Historically, R/W timeouts were never longer than 2.5 seconds. (5ms x 5 x 100 == 2.5s), so 10s has been enough ever since the driver was written around 2006

Longer timeouts are for erase etc, but they are now always set in cmd->busy_timeout.

So 22s is a strangely long timeout for R/W operations, and I would say even 10s is longer than we really want.

One option would be to make it a variable that host controllers can re-assign if needed e.g.

drivers/mmc/host/sdhci.c +3 -1
index 6aaf5c3ce34c..e5b4317937ed 100644
@@ -1670,7 +1670,7 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	else if (!cmd->data && cmd->busy_timeout > 9000)
 		timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
 	else
-		timeout += 10 * HZ;
+		timeout += host->fallback_timeout_secs * HZ;
 	sdhci_mod_timer(host, cmd->mrq, timeout);
 
 	if (host->use_external_dma)
@@ -3936,6 +3936,8 @@ struct sdhci_host *sdhci_alloc_host(struct device *dev,
 	 */
 	host->adma_table_cnt = SDHCI_MAX_SEGS * 2 + 1;
 
+	host->fallback_timeout_secs = 10;
+
 	return host;
 }