Skip to contentSkip to conversation

Linux 4.14.244

DISCUSSION Greg Kroah-Hartman 1 participant 2 messages Aug 15, 2021 Stable branch

lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

I'm announcing the release of the 4.14.244 kernel.

All users of the 4.14 kernel series must upgrade.

The updated 4.14.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.14.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary

thanks,

greg k-h

------------

 Makefile                                             |    2 
 arch/alpha/kernel/smp.c                              |    2 
 arch/arm/boot/dts/omap5-board-common.dtsi            |    9 --
 arch/mips/Makefile                                   |    2 
 arch/mips/mti-malta/malta-platform.c                 |    3 
 arch/x86/events/perf_event.h                         |    3 
 drivers/acpi/acpica/nsrepair2.c                      |    7 -
 drivers/ata/libata-sff.c                             |   35 ++++++--
 drivers/clk/clk-stm32f4.c                            |   10 +-
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c              |   11 ++
 drivers/media/v4l2-core/videobuf2-core.c             |   13 +++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c      |    3 
 drivers/net/ethernet/freescale/fec_main.c            |    2 
 drivers/net/ethernet/natsemi/natsemi.c               |    8 --
 drivers/net/ethernet/neterion/vxge/vxge-main.c       |    6 -
 drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c |    2 
 drivers/net/ethernet/qlogic/qla3xxx.c                |    6 -
 drivers/net/ethernet/xilinx/xilinx_emaclite.c        |    5 -
 drivers/net/ppp/ppp_generic.c                        |   19 +++-
 drivers/net/usb/pegasus.c                            |   14 ++-
 drivers/net/usb/qmi_wwan.c                           |   76 +++++++++++++++++--
 drivers/pcmcia/i82092.c                              |    1 
 drivers/scsi/sr.c                                    |    2 
 drivers/spi/spi-meson-spicc.c                        |    2 
 drivers/staging/rtl8723bs/hal/sdio_ops.c             |    2 
 drivers/tty/serial/8250/8250_port.c                  |   12 ++-
 drivers/usb/class/usbtmc.c                           |    8 --
 drivers/usb/common/usb-otg-fsm.c                     |    6 +
 drivers/usb/gadget/function/f_hid.c                  |   44 +++++++++--
 drivers/usb/host/ehci-pci.c                          |    3 
 drivers/usb/serial/ch341.c                           |    1 
 drivers/usb/serial/ftdi_sio.c                        |    1 
 drivers/usb/serial/ftdi_sio_ids.h                    |    3 
 drivers/usb/serial/option.c                          |    2 
 fs/ext4/namei.c                                      |    2 
 fs/namespace.c                                       |   42 +++++++---
 fs/pipe.c                                            |   19 ++++
 fs/reiserfs/stree.c                                  |   31 ++++++-
 fs/reiserfs/super.c                                  |    8 ++
 include/linux/usb/otg-fsm.h                          |    1 
 include/net/bluetooth/hci_core.h                     |    1 
 net/bluetooth/hci_core.c                             |   16 ++--
 net/bluetooth/hci_sock.c                             |   49 ++++++++----
 net/bluetooth/hci_sysfs.c                            |    3 
 scripts/tracing/draw_functrace.py                    |    6 -
 sound/core/seq/seq_ports.c                           |   39 ++++++---
 46 files changed, 399 insertions(+), 143 deletions(-)

Alex Xu (Hello71) (1):
pipe: increase minimum default pipe size to 2 pages

Christoph Hellwig (1):
libata: fix ata_pio_sector for CONFIG_HIGHMEM

Dan Carpenter (1):
bnx2x: fix an error code in bnx2x_nic_load()

Daniele Palmas (1):

      USB: serial: option: add Telit FD980 composition 0x1056

Dario Binacchi (1):
clk: stm32f4: fix post divisor setup for I2S/SAI PLLs

David Bauer (1):
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2

Dmitry Osipenko (1):
usb: otg-fsm: Fix hrtimer list corruption

Dongliang Mu (1):
spi: meson-spicc: fix memory leak in meson_spicc_remove

Fei Qin (1):
nfp: update ethtool reporting of pauseframe control

Greg Kroah-Hartman (1):

      Linux 4.14.244

H. Nikolaus Schaller (2):
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
mips: Fix non-POSIX regexp

Hans Verkuil (1):
media: videobuf2-core: dequeue if start_streaming fails

Hui Su (1):
scripts/tracing: fix the bug that can't parse raw_trace_func

Johan Hovold (1):
media: rtl28xxu: fix zero-length control request

Letu Ren (1):
net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset

Li Manyi (1):
scsi: sr: Return correct event when media event code is 3

Like Xu (1):
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest

Longfang Liu (1):
USB:ehci:fix Kunpeng920 ehci hardware problem

Maciej W. Rozycki (2):
serial: 8250: Mask out floating 16/32-bit bus bits
MIPS: Malta: Do not byte-swap accesses to the CBUS UART

Maxim Devaev (2):
usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
usb: gadget: f_hid: idle uses the highest byte for duration

Miklos Szeredi (1):
ovl: prevent private clone if bind mount is not allowed

Pali Rohár (1):
ppp: Fix generating ppp unit id when ifname is not specified

Pavel Skripkin (3):
net: pegasus: fix uninit-value in get_interrupt_interval
net: fec: fix use-after-free in fec_drv_remove
net: vxge: fix use-after-free in vxge_device_unregister

Phil Elwell (1):
usb: gadget: f_hid: fixed NULL pointer dereference

Prarit Bhargava (1):
alpha: Send stop IPI to send to online CPUs

Qiang.zhang (1):
USB: usbtmc: Fix RCU stall warning

Rafael J. Wysocki (1):
Revert "ACPICA: Fix memory leak caused by _CID repair function"

Reinhard Speyerer (1):
qmi_wwan: add network device usage statistics for qmimux devices

Shreyansh Chouhan (1):
reiserfs: check directory items on read from disk

Takashi Iwai (1):
ALSA: seq: Fix racy deletion of subscriber

Tetsuo Handa (1):
Bluetooth: defer cleanup of resources in hci_unregister_dev()

Theodore Ts'o (1):
ext4: fix potential htree corruption when growing large_dir directories

Wang Hai (1):
net: natsemi: Fix missing pci_disable_device() in probe and remove

Willy Tarreau (1):
USB: serial: ch341: fix character loss at high transfer rates

Xiangyang Zhang (1):
staging: rtl8723bs: Fix a resource leak in sd_int_dpc

Yu Kuai (1):
reiserfs: add check for root_inode in reiserfs_fill_super

YueHaibing (1):
net: xilinx_emaclite: Do not print real IOMEM pointer

Zheyu Ma (1):
pcmcia: i82092: fix a null pointer dereference bug

author maintainer
#1 lore raw
Makefile +1 -1
index c0664d65f9ef..ef77eb6d5d29 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 14
-SUBLEVEL = 243
+SUBLEVEL = 244
 EXTRAVERSION =
 NAME = Petit Gorille
 
arch/alpha/kernel/smp.c +1 -1
index d0dccae53ba9..8a89b9adb4fe 100644
@@ -585,7 +585,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)
arch/arm/boot/dts/omap5-board-common.dtsi +1 -8
index c58f14de0145..7d1877c9c361 100644
@@ -29,14 +29,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vdds_1v8_main: fixedregulator-vdds_1v8_main {
-		compatible = "regulator-fixed";
-		regulator-name = "vdds_1v8_main";
-		vin-supply = <&smps7_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -482,6 +474,7 @@
 					regulator-boot-on;
 				};
 
+				vdds_1v8_main:
 				smps7_reg: smps7 {
 					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";
arch/mips/Makefile +1 -1
index a4a06d173858..1190e6f75d4b 100644
@@ -314,7 +314,7 @@ LDFLAGS			+= -m $(ld-emul)
 
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
-	egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
+	egrep -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
 	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
 ifdef CONFIG_64BIT
 CHECKFLAGS		+= -m64
arch/mips/mti-malta/malta-platform.c +2 -1
index 11e9527c6e44..62ffac500eb5 100644
@@ -47,7 +47,8 @@ static struct plat_serial8250_port uart8250_data[] = {
 		.mapbase	= 0x1f000900,	/* The CBUS UART */
 		.irq		= MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
 		.uartclk	= 3686400,	/* Twice the usual clk! */
-		.iotype		= UPIO_MEM32,
+		.iotype		= IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ?
+				  UPIO_MEM32BE : UPIO_MEM32,
 		.flags		= CBUS_UART_FLAGS,
 		.regshift	= 3,
 	},
arch/x86/events/perf_event.h +2 -1
index bfe16631fd1d..ccd14aca30e7 100644
@@ -792,9 +792,10 @@ void x86_pmu_stop(struct perf_event *event, int flags);
 
 static inline void x86_pmu_disable_event(struct perf_event *event)
 {
+	u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask);
 	struct hw_perf_event *hwc = &event->hw;
 
-	wrmsrl(hwc->config_base, hwc->config);
+	wrmsrl(hwc->config_base, hwc->config & ~disable_mask);
 }
 
 void x86_pmu_enable_event(struct perf_event *event);
drivers/acpi/acpica/nsrepair2.c +0 -7
index 78b802b5f7d3..06037e044694 100644
@@ -409,13 +409,6 @@ acpi_ns_repair_CID(struct acpi_evaluate_info *info,
 
 			(*element_ptr)->common.reference_count =
 			    original_ref_count;
-
-			/*
-			 * The original_element holds a reference from the package object
-			 * that represents _HID. Since a new element was created by _HID,
-			 * remove the reference from the _CID package.
-			 */
-			acpi_ut_remove_reference(original_element);
 		}
 
 		element_ptr++;
drivers/ata/libata-sff.c +27 -8
index 7057630ccf52..1b4297ec3e87 100644
@@ -657,6 +657,20 @@ unsigned int ata_sff_data_xfer32(struct ata_queued_cmd *qc, unsigned char *buf,
 }
 EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
 
+static void ata_pio_xfer(struct ata_queued_cmd *qc, struct page *page,
+		unsigned int offset, size_t xfer_size)
+{
+	bool do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
+	unsigned char *buf;
+
+	buf = kmap_atomic(page);
+	qc->ap->ops->sff_data_xfer(qc, buf + offset, xfer_size, do_write);
+	kunmap_atomic(buf);
+
+	if (!do_write && !PageSlab(page))
+		flush_dcache_page(page);
+}
+
 /**
  *	ata_sff_data_xfer_noirq - Transfer data by PIO
  *	@qc: queued command
@@ -698,11 +712,9 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer_noirq);
  */
 static void ata_pio_sector(struct ata_queued_cmd *qc)
 {
-	int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
 	struct ata_port *ap = qc->ap;
 	struct page *page;
 	unsigned int offset;
-	unsigned char *buf;
 
 	if (!qc->cursg) {
 		qc->curbytes = qc->nbytes;
@@ -720,13 +732,20 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 
 	DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
 
-	/* do the actual data transfer */
-	buf = kmap_atomic(page);
-	ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size, do_write);
-	kunmap_atomic(buf);
+	/*
+	 * Split the transfer when it splits a page boundary.  Note that the
+	 * split still has to be dword aligned like all ATA data transfers.
+	 */
+	WARN_ON_ONCE(offset % 4);
+	if (offset + qc->sect_size > PAGE_SIZE) {
+		unsigned int split_len = PAGE_SIZE - offset;
 
-	if (!do_write && !PageSlab(page))
-		flush_dcache_page(page);
+		ata_pio_xfer(qc, page, offset, split_len);
+		ata_pio_xfer(qc, nth_page(page, 1), 0,
+			     qc->sect_size - split_len);
+	} else {
+		ata_pio_xfer(qc, page, offset, qc->sect_size);
+	}
 
 	qc->curbytes += qc->sect_size;
 	qc->cursg_ofs += qc->sect_size;
drivers/clk/clk-stm32f4.c +5 -5
index 96c6b6bc8f0e..46bc5f5d7134 100644
@@ -453,7 +453,7 @@ struct stm32f4_pll {
 
 struct stm32f4_pll_post_div_data {
 	int idx;
-	u8 pll_num;
+	int pll_idx;
 	const char *name;
 	const char *parent;
 	u8 flag;
@@ -484,13 +484,13 @@ static const struct clk_div_table post_divr_table[] = {
 
 #define MAX_POST_DIV 3
 static const struct stm32f4_pll_post_div_data  post_div_data[MAX_POST_DIV] = {
-	{ CLK_I2SQ_PDIV, PLL_I2S, "plli2s-q-div", "plli2s-q",
+	{ CLK_I2SQ_PDIV, PLL_VCO_I2S, "plli2s-q-div", "plli2s-q",
 		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 0, 5, 0, NULL},
 
-	{ CLK_SAIQ_PDIV, PLL_SAI, "pllsai-q-div", "pllsai-q",
+	{ CLK_SAIQ_PDIV, PLL_VCO_SAI, "pllsai-q-div", "pllsai-q",
 		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 8, 5, 0, NULL },
 
-	{ NO_IDX, PLL_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
+	{ NO_IDX, PLL_VCO_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
 		STM32F4_RCC_DCKCFGR, 16, 2, 0, post_divr_table },
 };
 
@@ -1489,7 +1489,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 				post_div->width,
 				post_div->flag_div,
 				post_div->div_table,
-				clks[post_div->pll_num],
+				clks[post_div->pll_idx],
 				&stm32f4_clk_lock);
 
 		if (post_div->idx != NO_IDX)
drivers/media/usb/dvb-usb-v2/rtl28xxu.c +10 -1
index 95a7b9123f8e..bfce2d6addf7 100644
@@ -50,7 +50,16 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
 	} else {
 		/* read */
 		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
-		pipe = usb_rcvctrlpipe(d->udev, 0);
+
+		/*
+		 * Zero-length transfers must use usb_sndctrlpipe() and
+		 * rtl28xxu_identify_state() uses a zero-length i2c read
+		 * command to determine the chip type.
+		 */
+		if (req->size)
+			pipe = usb_rcvctrlpipe(d->udev, 0);
+		else
+			pipe = usb_sndctrlpipe(d->udev, 0);
 	}
 
 	ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value,
drivers/media/v4l2-core/videobuf2-core.c +12 -1
index f1725da2a90d..5cd496e5010c 100644
@@ -1371,6 +1371,7 @@ static int vb2_start_streaming(struct vb2_queue *q)
 int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
 {
 	struct vb2_buffer *vb;
+	enum vb2_buffer_state orig_state;
 	int ret;
 
 	if (q->error) {
@@ -1400,6 +1401,7 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
 	 * Add to the queued buffers list, a buffer will stay on it until
 	 * dequeued in dqbuf.
 	 */
+	orig_state = vb->state;
 	list_add_tail(&vb->queued_entry, &q->queued_list);
 	q->queued_count++;
 	q->waiting_for_buffers = false;
@@ -1430,8 +1432,17 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
 	if (q->streaming && !q->start_streaming_called &&
 	    q->queued_count >= q->min_buffers_needed) {
 		ret = vb2_start_streaming(q);
-		if (ret)
+		if (ret) {
+			/*
+			 * Since vb2_core_qbuf will return with an error,
+			 * we should return it to state DEQUEUED since
+			 * the error indicates that the buffer wasn't queued.
+			 */
+			list_del(&vb->queued_entry);
+			q->queued_count--;
+			vb->state = orig_state;
 			return ret;
+		}
 	}
 
 	dprintk(2, "qbuf of buffer %d succeeded\n", vb->index);
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +2 -1
index faa45491ae4d..8c111def8185 100644
@@ -2667,7 +2667,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	}
 
 	/* Allocated memory for FW statistics  */
-	if (bnx2x_alloc_fw_stats_mem(bp))
+	rc = bnx2x_alloc_fw_stats_mem(bp);
+	if (rc)
 		LOAD_ERROR_EXIT(bp, load_error0);
 
 	/* request pf to initialize status blocks */
drivers/net/ethernet/freescale/fec_main.c +1 -1
index 22f964ef859e..29902b8709f1 100644
@@ -3581,13 +3581,13 @@ fec_drv_remove(struct platform_device *pdev)
 	if (of_phy_is_fixed_link(np))
 		of_phy_deregister_fixed_link(np);
 	of_node_put(fep->phy_node);
-	free_netdev(ndev);
 
 	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
+	free_netdev(ndev);
 	return 0;
 }
 
drivers/net/ethernet/natsemi/natsemi.c +2 -6
index 18af2a23a933..779f8042478a 100644
@@ -819,7 +819,7 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
 		printk(version);
 #endif
 
-	i = pci_enable_device(pdev);
+	i = pcim_enable_device(pdev);
 	if (i) return i;
 
 	/* natsemi has a non-standard PM control register
@@ -852,7 +852,7 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ioaddr = ioremap(iostart, iosize);
 	if (!ioaddr) {
 		i = -ENOMEM;
-		goto err_ioremap;
+		goto err_pci_request_regions;
 	}
 
 	/* Work around the dropped serial bit. */
@@ -974,9 +974,6 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
  err_register_netdev:
 	iounmap(ioaddr);
 
- err_ioremap:
-	pci_release_regions(pdev);
-
  err_pci_request_regions:
 	free_netdev(dev);
 	return i;
@@ -3244,7 +3241,6 @@ static void natsemi_remove1(struct pci_dev *pdev)
 
 	NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround);
 	unregister_netdev (dev);
-	pci_release_regions (pdev);
 	iounmap(ioaddr);
 	free_netdev (dev);
 }
drivers/net/ethernet/neterion/vxge/vxge-main.c +3 -3
index 50ea69d88480..e69e76bb2c77 100644
@@ -3537,13 +3537,13 @@ static void vxge_device_unregister(struct __vxge_hw_device *hldev)
 
 	kfree(vdev->vpaths);
 
-	/* we are safe to free it now */
-	free_netdev(dev);
-
 	vxge_debug_init(vdev->level_trace, "%s: ethernet device unregistered",
 			buf);
 	vxge_debug_entryexit(vdev->level_trace,	"%s: %s:%d  Exiting...", buf,
 			     __func__, __LINE__);
+
+	/* we are safe to free it now */
+	free_netdev(dev);
 }
 
 /*
drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c +2 -0
index 8e623d8fa78e..681919f8cbd7 100644
@@ -271,6 +271,8 @@ nfp_net_get_link_ksettings(struct net_device *netdev,
 
 	/* Init to unknowns */
 	ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause);
 	cmd->base.port = PORT_OTHER;
 	cmd->base.speed = SPEED_UNKNOWN;
 	cmd->base.duplex = DUPLEX_UNKNOWN;
drivers/net/ethernet/qlogic/qla3xxx.c +3 -3
index a8bb061e1a8a..36c7d78ba780 100644
@@ -155,7 +155,7 @@ static int ql_wait_for_drvr_lock(struct ql3_adapter *qdev)
 				      "driver lock acquired\n");
 			return 1;
 		}
-		ssleep(1);
+		mdelay(1000);
 	} while (++i < 10);
 
 	netdev_err(qdev->ndev, "Timed out waiting for driver lock...\n");
@@ -3291,7 +3291,7 @@ static int ql_adapter_reset(struct ql3_adapter *qdev)
 		if ((value & ISP_CONTROL_SR) == 0)
 			break;
 
-		ssleep(1);
+		mdelay(1000);
 	} while ((--max_wait_time));
 
 	/*
@@ -3327,7 +3327,7 @@ static int ql_adapter_reset(struct ql3_adapter *qdev)
 						   ispControlStatus);
 			if ((value & ISP_CONTROL_FSR) == 0)
 				break;
-			ssleep(1);
+			mdelay(1000);
 		} while ((--max_wait_time));
 	}
 	if (max_wait_time == 0)
drivers/net/ethernet/xilinx/xilinx_emaclite.c +2 -3
index 6f3e79159d7a..5261796ce708 100644
@@ -1165,9 +1165,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
 	}
 
 	dev_info(dev,
-		 "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n",
-		 (unsigned int __force)ndev->mem_start,
-		 (unsigned int __force)lp->base_addr, ndev->irq);
+		 "Xilinx EmacLite at 0x%08X mapped to 0x%p, irq=%d\n",
+		 (unsigned int __force)ndev->mem_start, lp->base_addr, ndev->irq);
 	return 0;
 
 error:
drivers/net/ppp/ppp_generic.c +15 -4
index 8faf4488340d..f846c55f9df0 100644
@@ -286,7 +286,7 @@ static struct channel *ppp_find_channel(struct ppp_net *pn, int unit);
 static int ppp_connect_channel(struct channel *pch, int unit);
 static int ppp_disconnect_channel(struct channel *pch);
 static void ppp_destroy_channel(struct channel *pch);
-static int unit_get(struct idr *p, void *ptr);
+static int unit_get(struct idr *p, void *ptr, int min);
 static int unit_set(struct idr *p, void *ptr, int n);
 static void unit_put(struct idr *p, int n);
 static void *unit_find(struct idr *p, int n);
@@ -977,9 +977,20 @@ static int ppp_unit_register(struct ppp *ppp, int unit, bool ifname_is_set)
 	mutex_lock(&pn->all_ppp_mutex);
 
 	if (unit < 0) {
-		ret = unit_get(&pn->units_idr, ppp);
+		ret = unit_get(&pn->units_idr, ppp, 0);
 		if (ret < 0)
 			goto err;
+		if (!ifname_is_set) {
+			while (1) {
+				snprintf(ppp->dev->name, IFNAMSIZ, "ppp%i", ret);
+				if (!__dev_get_by_name(ppp->ppp_net, ppp->dev->name))
+					break;
+				unit_put(&pn->units_idr, ret);
+				ret = unit_get(&pn->units_idr, ppp, ret + 1);
+				if (ret < 0)
+					goto err;
+			}
+		}
 	} else {
 		/* Caller asked for a specific unit number. Fail with -EEXIST
 		 * if unavailable. For backward compatibility, return -EEXIST
@@ -3266,9 +3277,9 @@ static int unit_set(struct idr *p, void *ptr, int n)
 }
 
 /* get new free unit number and associate pointer with it */
-static int unit_get(struct idr *p, void *ptr)
+static int unit_get(struct idr *p, void *ptr, int min)
 {
-	return idr_alloc(p, ptr, 0, 0, GFP_KERNEL);
+	return idr_alloc(p, ptr, min, 0, GFP_KERNEL);
 }
 
 /* put unit number back to a pool */
drivers/net/usb/pegasus.c +11 -3
index 5435c34dfcc7..d18a283a0ccf 100644
@@ -750,12 +750,16 @@ static inline void disable_net_traffic(pegasus_t *pegasus)
 	set_registers(pegasus, EthCtrl0, sizeof(tmp), &tmp);
 }
 
-static inline void get_interrupt_interval(pegasus_t *pegasus)
+static inline int get_interrupt_interval(pegasus_t *pegasus)
 {
 	u16 data;
 	u8 interval;
+	int ret;
+
+	ret = read_eprom_word(pegasus, 4, &data);
+	if (ret < 0)
+		return ret;
 
-	read_eprom_word(pegasus, 4, &data);
 	interval = data >> 8;
 	if (pegasus->usb->speed != USB_SPEED_HIGH) {
 		if (interval < 0x80) {
@@ -770,6 +774,8 @@ static inline void get_interrupt_interval(pegasus_t *pegasus)
 		}
 	}
 	pegasus->intr_interval = interval;
+
+	return 0;
 }
 
 static void set_carrier(struct net_device *net)
@@ -1188,7 +1194,9 @@ static int pegasus_probe(struct usb_interface *intf,
 				| NETIF_MSG_PROBE | NETIF_MSG_LINK);
 
 	pegasus->features = usb_dev_id[dev_index].private;
-	get_interrupt_interval(pegasus);
+	res = get_interrupt_interval(pegasus);
+	if (res)
+		goto out2;
 	if (reset_mac(pegasus)) {
 		dev_err(&intf->dev, "can't reset MAC\n");
 		res = -EIO;
drivers/net/usb/qmi_wwan.c +71 -5

122 lines not on this page · raw message

drivers/pcmcia/i82092.c +1 -0
index aae7e6df99cd..ba13e3c3d6b8 100644
@@ -105,6 +105,7 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
 	for (i = 0;i<socket_count;i++) {
 		sockets[i].card_state = 1; /* 1 = present but empty */
 		sockets[i].io_base = pci_resource_start(dev, 0);
+		sockets[i].dev = dev;
 		sockets[i].socket.features |= SS_CAP_PCCARD;
 		sockets[i].socket.map_size = 0x1000;
 		sockets[i].socket.irq_mask = 0;
drivers/scsi/sr.c +1 -1
index a46fbe2d2ee6..be2daf5536ff 100644
@@ -217,7 +217,7 @@ static unsigned int sr_get_events(struct scsi_device *sdev)
 	else if (med->media_event_code == 2)
 		return DISK_EVENT_MEDIA_CHANGE;
 	else if (med->media_event_code == 3)
-		return DISK_EVENT_EJECT_REQUEST;
+		return DISK_EVENT_MEDIA_CHANGE;
 	return 0;
 }
 
drivers/spi/spi-meson-spicc.c +2 -0
index a5b0df7e6131..4d1d7053291b 100644
@@ -599,6 +599,8 @@ static int meson_spicc_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(spicc->core);
 
+	spi_master_put(spicc->master);
+
 	return 0;
 }
 
drivers/staging/rtl8723bs/hal/sdio_ops.c +2 -0
index 1d1b14dedd35..689e544a506a 100644
@@ -1118,6 +1118,8 @@ void sd_int_dpc(struct adapter *padapter)
 				} else {
 					rtw_c2h_wk_cmd(padapter, (u8 *)c2h_evt);
 				}
+			} else {
+				kfree(c2h_evt);
 			}
 		} else {
 			/* Error handling for malloc fail */
drivers/tty/serial/8250/8250_port.c +9 -3
index 25e8ccd6865a..20f58e9da2fb 100644
@@ -314,7 +314,11 @@ static const struct serial8250_config uart_config[] = {
 /* Uart divisor latch read */
 static int default_serial_dl_read(struct uart_8250_port *up)
 {
-	return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+	/* Assign these in pieces to truncate any bits above 7.  */
+	unsigned char dll = serial_in(up, UART_DLL);
+	unsigned char dlm = serial_in(up, UART_DLM);
+
+	return dll | dlm << 8;
 }
 
 /* Uart divisor latch write */
@@ -1302,9 +1306,11 @@ static void autoconfig(struct uart_8250_port *up)
 	serial_out(up, UART_LCR, 0);
 
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-	scratch = serial_in(up, UART_IIR) >> 6;
 
-	switch (scratch) {
+	/* Assign this as it is to truncate any bits above 7.  */
+	scratch = serial_in(up, UART_IIR);
+
+	switch (scratch >> 6) {
 	case 0:
 		autoconfig_8250(up);
 		break;
drivers/usb/class/usbtmc.c +1 -7
index 6ebfabfa0dc7..ee6cba310448 100644
@@ -1343,16 +1343,10 @@ static void usbtmc_interrupt(struct urb *urb)
 	case -EOVERFLOW:
 		dev_err(dev, "overflow with length %d, actual length is %d\n",
 			data->iin_wMaxPacketSize, urb->actual_length);
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-	case -EILSEQ:
-	case -ETIME:
+	default:
 		/* urb terminated, clean up */
 		dev_dbg(dev, "urb terminated, status: %d\n", status);
 		return;
-	default:
-		dev_err(dev, "unknown status received: %d\n", status);
 	}
 exit:
 	rv = usb_submit_urb(urb, GFP_ATOMIC);
drivers/usb/common/usb-otg-fsm.c +5 -1
index b8fe31e409a5..a8b91f825e1a 100644
@@ -206,7 +206,11 @@ static void otg_start_hnp_polling(struct otg_fsm *fsm)
 	if (!fsm->host_req_flag)
 		return;
 
-	INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+	if (!fsm->hnp_work_inited) {
+		INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+		fsm->hnp_work_inited = true;
+	}
+
 	schedule_delayed_work(&fsm->hnp_polling_work,
 					msecs_to_jiffies(T_HOST_REQ_POLL));
 }
drivers/usb/gadget/function/f_hid.c +38 -6

90 lines not on this page · raw message

drivers/usb/host/ehci-pci.c +3 -0
index 265c9af1d2b5..d0deff8c81a3 100644
@@ -311,6 +311,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
 	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
 		;	/* ConneXT has no sbrn register */
+	else if (pdev->vendor == PCI_VENDOR_ID_HUAWEI
+			 && pdev->device == 0xa239)
+		;	/* HUAWEI Kunpeng920 USB EHCI has no sbrn register */
 	else
 		pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
 
drivers/usb/serial/ch341.c +1 -0
index 4ae7afc68bde..86ca2405942b 100644
@@ -628,6 +628,7 @@ static struct usb_serial_driver ch341_device = {
 		.owner	= THIS_MODULE,
 		.name	= "ch341-uart",
 	},
+	.bulk_in_size      = 512,
 	.id_table          = id_table,
 	.num_ports         = 1,
 	.open              = ch341_open,
drivers/usb/serial/ftdi_sio.c +1 -0
index 1196b0dcf828..bcf4ba4f9819 100644
@@ -214,6 +214,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
 	{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_AUTO_M3_OP_COM_V2_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
drivers/usb/serial/ftdi_sio_ids.h +3 -0
index add602bebd82..755858ca20ba 100644
@@ -159,6 +159,9 @@
 /* Vardaan Enterprises Serial Interface VEUSB422R3 */
 #define FTDI_VARDAAN_PID	0xF070
 
+/* Auto-M3 Ltd. - OP-COM USB V2 - OBD interface Adapter */
+#define FTDI_AUTO_M3_OP_COM_V2_PID	0x4f50
+
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */
drivers/usb/serial/option.c +2 -0
index fa9e3a2ddd01..5482e7a973d1 100644
@@ -1206,6 +1206,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1055, 0xff),	/* Telit FN980 (PCIe) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff),	/* Telit FD980 */
+	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
fs/ext4/namei.c +1 -1
index 83bdae81721d..9a138a6dc17e 100644
@@ -2295,7 +2295,7 @@ static int ext4_dx_add_entry(handle_t *handle, struct ext4_filename *fname,
 				goto journal_error;
 			err = ext4_handle_dirty_dx_node(handle, dir,
 							frame->bh);
-			if (err)
+			if (restart || err)
 				goto journal_error;
 		} else {
 			struct dx_root *dxroot;
fs/namespace.c +28 -14

67 lines not on this page · raw message

fs/pipe.c +17 -2
index fa3c2c25cec5..0523dd148ed3 100644
@@ -29,6 +29,21 @@
 
 #include "internal.h"
 
+/*
+ * New pipe buffers will be restricted to this size while the user is exceeding
+ * their pipe buffer quota. The general pipe use case needs at least two
+ * buffers: one for data yet to be read, and one for new data. If this is less
+ * than two, then a write to a non-empty pipe may block even if the pipe is not
+ * full. This can occur with GNU make jobserver or similar uses of pipes as
+ * semaphores: multiple processes may be waiting to write tokens back to the
+ * pipe before reading tokens: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/.
+ *
+ * Users can reduce their pipe buffers with F_SETPIPE_SZ below this at their
+ * own risk, namely: pipe writes to non-full pipes may block until the pipe is
+ * emptied.
+ */
+#define PIPE_MIN_DEF_BUFFERS 2
+
 /*
  * The max size that a non-root user is allowed to grow the pipe. Can
  * be set by root in /proc/sys/fs/pipe-max-size
@@ -654,8 +669,8 @@ struct pipe_inode_info *alloc_pipe_info(void)
 	user_bufs = account_pipe_buffers(user, 0, pipe_bufs);
 
 	if (too_many_pipe_buffers_soft(user_bufs) && is_unprivileged_user()) {
-		user_bufs = account_pipe_buffers(user, pipe_bufs, 1);
-		pipe_bufs = 1;
+		user_bufs = account_pipe_buffers(user, pipe_bufs, PIPE_MIN_DEF_BUFFERS);
+		pipe_bufs = PIPE_MIN_DEF_BUFFERS;
 	}
 
 	if (too_many_pipe_buffers_hard(user_bufs) && is_unprivileged_user())
fs/reiserfs/stree.c +26 -5
index 5229038852ca..4ebad6781b0e 100644
@@ -387,6 +387,24 @@ void pathrelse(struct treepath *search_path)
 	search_path->path_length = ILLEGAL_PATH_ELEMENT_OFFSET;
 }
 
+static int has_valid_deh_location(struct buffer_head *bh, struct item_head *ih)
+{
+	struct reiserfs_de_head *deh;
+	int i;
+
+	deh = B_I_DEH(bh, ih);
+	for (i = 0; i < ih_entry_count(ih); i++) {
+		if (deh_location(&deh[i]) > ih_item_len(ih)) {
+			reiserfs_warning(NULL, "reiserfs-5094",
+					 "directory entry location seems wrong %h",
+					 &deh[i]);
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
 static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
 {
 	struct block_head *blkh;
@@ -454,11 +472,14 @@ static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
 					 "(second one): %h", ih);
 			return 0;
 		}
-		if (is_direntry_le_ih(ih) && (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE))) {
-			reiserfs_warning(NULL, "reiserfs-5093",
-					 "item entry count seems wrong %h",
-					 ih);
-			return 0;
+		if (is_direntry_le_ih(ih)) {
+			if (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE)) {
+				reiserfs_warning(NULL, "reiserfs-5093",
+						 "item entry count seems wrong %h",
+						 ih);
+				return 0;
+			}
+			return has_valid_deh_location(bh, ih);
 		}
 		prev_location = ih_location(ih);
 	}
fs/reiserfs/super.c +8 -0
index fbae5f4eea09..7dfdc503e601 100644
@@ -2085,6 +2085,14 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 		unlock_new_inode(root_inode);
 	}
 
+	if (!S_ISDIR(root_inode->i_mode) || !inode_get_bytes(root_inode) ||
+	    !root_inode->i_size) {
+		SWARN(silent, s, "", "corrupt root inode, run fsck");
+		iput(root_inode);
+		errval = -EUCLEAN;
+		goto error;
+	}
+
 	s->s_root = d_make_root(root_inode);
 	if (!s->s_root)
 		goto error;
include/linux/usb/otg-fsm.h +1 -0
index a0a8f878503c..31b204084d5f 100644
@@ -195,6 +195,7 @@ struct otg_fsm {
 	struct mutex lock;
 	u8 *host_req_flag;
 	struct delayed_work hnp_polling_work;
+	bool hnp_work_inited;
 	bool state_changed;
 };
 
include/net/bluetooth/hci_core.h +1 -0
index 0cc5e2b4bbf4..51afaaa68408 100644
@@ -1030,6 +1030,7 @@ struct hci_dev *hci_alloc_dev(void);
 void hci_free_dev(struct hci_dev *hdev);
 int hci_register_dev(struct hci_dev *hdev);
 void hci_unregister_dev(struct hci_dev *hdev);
+void hci_cleanup_dev(struct hci_dev *hdev);
 int hci_suspend_dev(struct hci_dev *hdev);
 int hci_resume_dev(struct hci_dev *hdev);
 int hci_reset_dev(struct hci_dev *hdev);
net/bluetooth/hci_core.c +8 -8
index ba5c899d1edf..3b2dd98e9fd6 100644
@@ -3181,14 +3181,10 @@ EXPORT_SYMBOL(hci_register_dev);
 /* Unregister HCI device */
 void hci_unregister_dev(struct hci_dev *hdev)
 {
-	int id;
-
 	BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);
 
 	hci_dev_set_flag(hdev, HCI_UNREGISTER);
 
-	id = hdev->id;
-
 	write_lock(&hci_dev_list_lock);
 	list_del(&hdev->list);
 	write_unlock(&hci_dev_list_lock);
@@ -3217,7 +3213,14 @@ void hci_unregister_dev(struct hci_dev *hdev)
 	}
 
 	device_del(&hdev->dev);
+	/* Actual cleanup is deferred until hci_cleanup_dev(). */
+	hci_dev_put(hdev);
+}
+EXPORT_SYMBOL(hci_unregister_dev);
 
+/* Cleanup HCI device */
+void hci_cleanup_dev(struct hci_dev *hdev)
+{
 	debugfs_remove_recursive(hdev->debugfs);
 	kfree_const(hdev->hw_info);
 	kfree_const(hdev->fw_info);
@@ -3239,11 +3242,8 @@ void hci_unregister_dev(struct hci_dev *hdev)
 	hci_discovery_filter_clear(hdev);
 	hci_dev_unlock(hdev);
 
-	hci_dev_put(hdev);
-
-	ida_simple_remove(&hci_index_ida, id);
+	ida_simple_remove(&hci_index_ida, hdev->id);
 }
-EXPORT_SYMBOL(hci_unregister_dev);
 
 /* Suspend HCI device */
 int hci_suspend_dev(struct hci_dev *hdev)
net/bluetooth/hci_sock.c +33 -16

92 lines not on this page · raw message

net/bluetooth/hci_sysfs.c +3 -0
index d5c7c89ec4d6..b568f7c21b30 100644
@@ -83,6 +83,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn)
 static void bt_host_release(struct device *dev)
 {
 	struct hci_dev *hdev = to_hci_dev(dev);
+
+	if (hci_dev_test_flag(hdev, HCI_UNREGISTER))
+		hci_cleanup_dev(hdev);
 	kfree(hdev);
 	module_put(THIS_MODULE);
 }
scripts/tracing/draw_functrace.py +3 -3
index 30f117dfab43..68ecb455b492 100755
@@ -17,7 +17,7 @@ Usage:
 	$ cat /sys/kernel/debug/tracing/trace_pipe > ~/raw_trace_func
 	Wait some times but not too much, the script is a bit slow.
 	Break the pipe (Ctrl + Z)
-	$ scripts/draw_functrace.py < raw_trace_func > draw_functrace
+	$ scripts/tracing/draw_functrace.py < ~/raw_trace_func > draw_functrace
 	Then you have your drawn trace in draw_functrace
 """
 
@@ -103,10 +103,10 @@ def parseLine(line):
 	line = line.strip()
 	if line.startswith("#"):
 		raise CommentLineException
-	m = re.match("[^]]+?\\] +([0-9.]+): (\\w+) <-(\\w+)", line)
+	m = re.match("[^]]+?\\] +([a-z.]+) +([0-9.]+): (\\w+) <-(\\w+)", line)
 	if m is None:
 		raise BrokenLineException
-	return (m.group(1), m.group(2), m.group(3))
+	return (m.group(2), m.group(3), m.group(4))
 
 
 def main():
sound/core/seq/seq_ports.c +27 -12
index c8fa4336bccd..86fb5eea9e4d 100644
@@ -532,10 +532,11 @@ static int check_and_subscribe_port(struct snd_seq_client *client,
 	return err;
 }
 
-static void delete_and_unsubscribe_port(struct snd_seq_client *client,
-					struct snd_seq_client_port *port,
-					struct snd_seq_subscribers *subs,
-					bool is_src, bool ack)
+/* called with grp->list_mutex held */
+static void __delete_and_unsubscribe_port(struct snd_seq_client *client,
+					  struct snd_seq_client_port *port,
+					  struct snd_seq_subscribers *subs,
+					  bool is_src, bool ack)
 {
 	struct snd_seq_port_subs_info *grp;
 	struct list_head *list;
@@ -543,7 +544,6 @@ static void delete_and_unsubscribe_port(struct snd_seq_client *client,
 
 	grp = is_src ? &port->c_src : &port->c_dest;
 	list = is_src ? &subs->src_list : &subs->dest_list;
-	down_write(&grp->list_mutex);
 	write_lock_irq(&grp->list_lock);
 	empty = list_empty(list);
 	if (!empty)
@@ -553,6 +553,18 @@ static void delete_and_unsubscribe_port(struct snd_seq_client *client,
 
 	if (!empty)
 		unsubscribe_port(client, port, grp, &subs->info, ack);
+}
+
+static void delete_and_unsubscribe_port(struct snd_seq_client *client,
+					struct snd_seq_client_port *port,
+					struct snd_seq_subscribers *subs,
+					bool is_src, bool ack)
+{
+	struct snd_seq_port_subs_info *grp;
+
+	grp = is_src ? &port->c_src : &port->c_dest;
+	down_write(&grp->list_mutex);
+	__delete_and_unsubscribe_port(client, port, subs, is_src, ack);
 	up_write(&grp->list_mutex);
 }
 
@@ -608,27 +620,30 @@ int snd_seq_port_disconnect(struct snd_seq_client *connector,
 			    struct snd_seq_client_port *dest_port,
 			    struct snd_seq_port_subscribe *info)
 {
-	struct snd_seq_port_subs_info *src = &src_port->c_src;
+	struct snd_seq_port_subs_info *dest = &dest_port->c_dest;
 	struct snd_seq_subscribers *subs;
 	int err = -ENOENT;
 
-	down_write(&src->list_mutex);
+	/* always start from deleting the dest port for avoiding concurrent
+	 * deletions
+	 */
+	down_write(&dest->list_mutex);
 	/* look for the connection */
-	list_for_each_entry(subs, &src->list_head, src_list) {
+	list_for_each_entry(subs, &dest->list_head, dest_list) {
 		if (match_subs_info(info, &subs->info)) {
-			atomic_dec(&subs->ref_count); /* mark as not ready */
+			__delete_and_unsubscribe_port(dest_client, dest_port,
+						      subs, false,
+						      connector->number != dest_client->number);
 			err = 0;
 			break;
 		}
 	}
-	up_write(&src->list_mutex);
+	up_write(&dest->list_mutex);
 	if (err < 0)
 		return err;
 
 	delete_and_unsubscribe_port(src_client, src_port, subs, true,
 				    connector->number != src_client->number);
-	delete_and_unsubscribe_port(dest_client, dest_port, subs, false,
-				    connector->number != dest_client->number);
 	kfree(subs);
 	return 0;
 }