Skip to contentSkip to conversation

scsi: qla1280: Resolve some compilation issues

PATCH Applied John Garry 3 participants 6 messages Aug 18, 2021 – Aug 28, 2021

Subsystems (2)

v1 of 2 Applied Latest is v2 →

lore
Share & tools
lore

John Garry

author
#0 lore raw

cover scsi: qla1280: Resolve some compilation issues

As another follow-up to removing scsi_cmnd.tag in [0], remove its usage in the qla1280 driver lurking under a local build switch. Also fix pre-existing compilation issues under the same switch.

Based on mkp-scsi 5.15 staging at 848ade90ba9c

[0] https://lore.kernel.org/linux-scsi/[email protected]/T/#mb47909f38f35837686734369600051b278d124af

John Garry (2):
scsi: qla1280: Stop using scsi_cmnd.tag
scsi: qla1280: Fix DEBUG_QLA1280 compilation issues

 drivers/scsi/qla1280.c | 41 +++++++++--------------------------------
 1 file changed, 9 insertions(+), 32 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH 1/2 scsi: qla1280: Stop using scsi_cmnd.tag

Use scsi_cmd_to_rq(cmd)->tag instead of scsi_cmnd.tag as preference.

---
 drivers/scsi/qla1280.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/qla1280.c +1 -1
index aec92471c5f2..b4f7d8d7a01c 100644
@@ -3980,7 +3980,7 @@ __qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
 	   qla1280_dump_buffer(1, (char *)sg, (cmd->use_sg*sizeof(struct scatterlist)));
 	   } */
 	printk("  tag=%d, transfersize=0x%x \n",
-	       cmd->tag, cmd->transfersize);
+	       scsi_cmd_to_rq(cmd)->tag, cmd->transfersize);
 	printk("  SP=0x%p\n", CMD_SP(cmd));
 	printk(" underflow size = 0x%x, direction=0x%x\n",
 	       cmd->underflow, cmd->sc_data_direction);
Signature · 1 line
2.17.1
author
#2 lore raw

PATCH 2/2 scsi: qla1280: Fix DEBUG_QLA1280 compilation issues

In reply to John Garry

The driver does not compile under DEBUG_QLA1280 flag, so fix up with as little fuss as possible some debug statements.

Also delete ql1280_dump_device(), which looks to have never been referenced.

---
 drivers/scsi/qla1280.c | 39 ++++++++-------------------------------
 1 file changed, 8 insertions(+), 31 deletions(-)
drivers/scsi/qla1280.c +8 -31
index b4f7d8d7a01c..27b16ec399cd 100644
@@ -2807,7 +2807,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
 	dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp,
 		cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
-	dprintk(2, "             bus %i, target %i, lun %i\n",
+	dprintk(2, "             bus %i, target %i, lun %lld\n",
 		SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
 	qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE);
 
@@ -2879,7 +2879,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 			remseg--;
 		}
 		dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
-			"command packet data - b %i, t %i, l %i \n",
+			"command packet data - b %i, t %i, l %lld \n",
 			SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
 			SCSI_LUN_32(cmd));
 		qla1280_dump_buffer(5, (char *)pkt,
@@ -2937,14 +2937,14 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 			remseg -= cnt;
 			dprintk(5, "qla1280_64bit_start_scsi: "
 				"continuation packet data - b %i, t "
-				"%i, l %i \n", SCSI_BUS_32(cmd),
+				"%i, l %lld \n", SCSI_BUS_32(cmd),
 				SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
 			qla1280_dump_buffer(5, (char *)pkt,
 					    REQUEST_ENTRY_SIZE);
 		}
 	} else {	/* No data transfer */
 		dprintk(5, "qla1280_64bit_start_scsi: No data, command "
-			"packet data - b %i, t %i, l %i \n",
+			"packet data - b %i, t %i, l %lld \n",
 			SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
 		qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
 	}
@@ -3126,7 +3126,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 			*dword_ptr++ =
 				cpu_to_le32(lower_32_bits(sg_dma_address(s)));
 			*dword_ptr++ = cpu_to_le32(sg_dma_len(s));
-			dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n",
+			dprintk(3, "S/G Segment phys_addr=0x%x, len=0x%x\n",
 				(lower_32_bits(sg_dma_address(s))),
 				(sg_dma_len(s)));
 			remseg--;
@@ -3182,7 +3182,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 			remseg -= cnt;
 			dprintk(5, "qla1280_32bit_start_scsi: "
 				"continuation packet data - "
-				"scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd),
+				"scsi(%i:%i:%lld)\n", SCSI_BUS_32(cmd),
 				SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
 			qla1280_dump_buffer(5, (char *)pkt,
 					    REQUEST_ENTRY_SIZE);
@@ -3663,7 +3663,7 @@ qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
 
 			dprintk(2, "qla1280_status_entry: Check "
 				"condition Sense data, b %i, t %i, "
-				"l %i\n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
+				"l %lld\n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
 				SCSI_LUN_32(cmd));
 			if (sense_sz)
 				qla1280_dump_buffer(2,
@@ -3963,7 +3963,7 @@ __qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
 
 	sp = (struct srb *)CMD_SP(cmd);
 	printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd));
-	printk("  chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n",
+	printk("  chan=%d, target = 0x%02x, lun = 0x%02llx, cmd_len = 0x%02x\n",
 	       SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd),
 	       CMD_CDBLEN(cmd));
 	printk(" CDB = ");
@@ -3985,29 +3985,6 @@ __qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
 	printk(" underflow size = 0x%x, direction=0x%x\n",
 	       cmd->underflow, cmd->sc_data_direction);
 }
-
-/**************************************************************************
- *   ql1280_dump_device
- *
- **************************************************************************/
-static void
-ql1280_dump_device(struct scsi_qla_host *ha)
-{
-
-	struct scsi_cmnd *cp;
-	struct srb *sp;
-	int i;
-
-	printk(KERN_DEBUG "Outstanding Commands on controller:\n");
-
-	for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
-		if ((sp = ha->outstanding_cmds[i]) == NULL)
-			continue;
-		if ((cp = sp->cmd) == NULL)
-			continue;
-		qla1280_print_scsi_cmd(1, cp);
-	}
-}
 #endif
 
 
Signature · 1 line
2.17.1
#3 lore raw

Re: [PATCH 2/2] scsi: qla1280: Fix DEBUG_QLA1280 compilation issues

Quoted 28 lines · John Garry

The driver does not compile under DEBUG_QLA1280 flag, so fix up with as
little fuss as possible some debug statements.

Also delete ql1280_dump_device(), which looks to have never been referenced.

---
 drivers/scsi/qla1280.c | 39 ++++++++-------------------------------
 1 file changed, 8 insertions(+), 31 deletions(-)
drivers/scsi/qla1280.c +1 -1
index b4f7d8d7a01c..27b16ec399cd 100644
@@ -2807,7 +2807,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host
 *ha, struct srb * sp)
 
 	dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd,
 sp,
 		cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
-	dprintk(2, "             bus %i, target %i, lun %i\n",
+	dprintk(2, "             bus %i, target %i, lun %lld\n",
 		SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
drivers/scsi/qla1280.c +0 -0
 	qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE);

drivers/scsi/qla1280.c qla1280_64bit_start_scsi(struct scsi_qla_host · line 2885

Quoted 8 lines
drivers/scsi/qla1280.c +1 -1
@@ -2879,7 +2879,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host
 *ha, struct srb * sp)
 			remseg--;
 		}
 		dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
-			"command packet data - b %i, t %i, l %i \n",
+			"command packet data - b %i, t %i, l %lld \n",
 			SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
 			SCSI_LUN_32(cmd));

These are the wrong fixes, I think. The qla1280 can only cope with 32 bits, which is why all the macros have an _32. Over the years we've expanded the values in the SCSI command to be 64 bit but by and large, the truncation in this driver is silent. However, the correct fix should be to make the truncation explicit in the macro, so

#define SCSI_LUN_32(Cmnd) ((int)Cmnd->device->lun)

And the same for all the other _32 macros. This avoids the unexpected outcome that the _32 macros are actually returning 64 bits and cause me to do a WTF at your %lld change.

James

author
#4 lore raw

Re: [PATCH 2/2] scsi: qla1280: Fix DEBUG_QLA1280 compilation issues

Quoted 28 lines · James Bottomley
Quoted 27 lines · John Garry

The driver does not compile under DEBUG_QLA1280 flag, so fix up with as
little fuss as possible some debug statements.

Also delete ql1280_dump_device(), which looks to have never been referenced.

---
  drivers/scsi/qla1280.c | 39 ++++++++-------------------------------
  1 file changed, 8 insertions(+), 31 deletions(-)
drivers/scsi/qla1280.c +1 -1
index b4f7d8d7a01c..27b16ec399cd 100644
@@ -2807,7 +2807,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host
 *ha, struct srb * sp)
 
  	dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd,
 sp,
  		cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
-	dprintk(2, "             bus %i, target %i, lun %i\n",
+	dprintk(2, "             bus %i, target %i, lun %lld\n",
  		SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
  	qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE);
Quoted 9 lines

drivers/scsi/qla1280.c qla1280_64bit_start_scsi(struct scsi_qla_host · line 2885

Quoted 9 lines
drivers/scsi/qla1280.c +1 -1
@@ -2879,7 +2879,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host
 *ha, struct srb * sp)
  			remseg--;
  		}
  		dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
-			"command packet data - b %i, t %i, l %i \n",
+			"command packet data - b %i, t %i, l %lld \n",
  			SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
  			SCSI_LUN_32(cmd));

Hi James,

Quoted 2 lines

These are the wrong fixes, I think. The qla1280 can only cope with 32 bits, which is why all the macros have an _32.

Looking structures like struct cmd_entry, mrk_entry, ecmd_entry, lun member is an 8-bit value. There is also this definition:
#define MAX_LUNS 8 /* 32 */
#define MAX_L_BITS 3 /* 5 */

But not sure on where 32/5 comes from - I suppose it's the size the driver uses to hold the lun. Or the 32 bits you mention.

Quoted 6 lines

Over the years we've
expanded the values in the SCSI command to be 64 bit but by and large, the truncation in this driver is silent. However, the correct fix should be to make the truncation explicit in the macro, so

#define SCSI_LUN_32(Cmnd) ((int)Cmnd->device->lun)

SCSI_LUN_32 is used outside the masked debug code, so I didn't want to mess with that.

Quoted 4 lines

And the same for all the other _32 macros. This avoids the unexpected outcome that the _32 macros are actually returning 64 bits and cause me to do a WTF at your %lld change.

If a relevant scsi_device member really hold values > 32b in size for this driver then it's in trouble, as chopping off the top bits by casting won't help.

And if we only ever expect the bottom 32b to be used, using %lld as opposed to casting to an int and using %i should not really make a difference.

Anyway, I can change as you suggest. But I would rather do it only in SCSI_LUN_32().

Thanks!

#5 lore raw
In reply to John Garry
Quoted 9 lines · John Garry

As another follow-up to removing scsi_cmnd.tag in [0], remove its usage in the qla1280 driver lurking under a local build switch. Also fix pre-existing compilation issues under the same switch.

Based on mkp-scsi 5.15 staging at 848ade90ba9c

[0] https://lore.kernel.org/linux-scsi/[email protected]/T/#mb47909f38f35837686734369600051b278d124af

[...]

Applied to 5.15/scsi-queue, thanks!

[1/2] scsi: qla1280: Stop using scsi_cmnd.tag

      https://git.kernel.org/mkp/scsi/c/c563c126e293
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering