Skip to contentSkip to conversation

sparc64: Move offset calculation of several structures to asm-offset.c

PATCH In review Kirill Tkhai 2 participants 2 messages Mar 23, 2013 SPARC + UltraSPARC (sparc/sparc64)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sparc64: Move offset calculation of several structures to asm-offset.c

1)Calculate offset of members of thread_info, trap_per_cpu and tsb_config in asm-offset.c
2)Replace DEFINE(*, offsetof(...)) with OFFSET(...)
3)Inify using of asm-offset.h in header files

---
 arch/sparc/include/asm/hibernate.h      |    8 +++
 arch/sparc/include/asm/mmu_64.h         |   13 ++---
 arch/sparc/include/asm/thread_info_64.h |   29 +++--------
 arch/sparc/include/asm/trap_block.h     |   27 ++--------
 arch/sparc/kernel/asm-offsets.c         |   75 +++++++++++++++++++++++----
 arch/sparc/kernel/traps_64.c            |   84 -------------------------------
 arch/sparc/power/hibernate_asm.S        |    2 +-
 7 files changed, 92 insertions(+), 146 deletions(-)
arch/sparc/include/asm/hibernate.h +8 -0
index 2ec34f8..7d6edfb 100644
@@ -7,6 +7,8 @@
 #ifndef ___SPARC_HIBERNATE_H
 #define ___SPARC_HIBERNATE_H
 
+#ifndef __ASSEMBLY__
+
 struct saved_context {
 	unsigned long fp;
 	unsigned long cwp;
@@ -20,4 +22,10 @@ struct saved_context {
 	unsigned long g6;
 };
 
+#else /* (__ASSEMBLY__) */
+
+#include <asm/asm-offsets.h>
+
+#endif /* (__ASSEMBLY__) */
+
 #endif
arch/sparc/include/asm/mmu_64.h +5 -8
index 76092c4..3e886b5 100644
@@ -98,13 +98,10 @@ typedef struct {
 	struct hv_tsb_descr	tsb_descr[MM_NUM_TSBS];
 } mm_context_t;
 
-#endif /* !__ASSEMBLY__ */
-
-#define TSB_CONFIG_TSB		0x00
-#define TSB_CONFIG_RSS_LIMIT	0x08
-#define TSB_CONFIG_NENTRIES	0x10
-#define TSB_CONFIG_REG_VAL	0x18
-#define TSB_CONFIG_MAP_VADDR	0x20
-#define TSB_CONFIG_MAP_PTE	0x28
+#else /* __ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+
+#endif /* __ASSEMBLY__ */
 
 #endif /* __MMU_H */
arch/sparc/include/asm/thread_info_64.h +7 -22
index 269bd92..f9c8b68 100644
@@ -66,35 +66,20 @@ struct thread_info {
 	unsigned long		fpregs[0] __attribute__ ((aligned(64)));
 };
 
-#endif /* !(__ASSEMBLY__) */
+#endif /* (!__ASSEMBLY__) */
+
+#ifndef _ASM_OFFSETS_C /* This is used from !__ASSEMBLY code too (switch_to) */
+
+#include <asm/asm-offsets.h>
 
-/* offsets into the thread_info struct for assembly code access */
-#define TI_TASK		0x00000000
-#define TI_FLAGS	0x00000008
 #define TI_FAULT_CODE	(TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE)
 #define TI_WSTATE	(TI_FLAGS + TI_FLAG_BYTE_WSTATE)
 #define TI_CWP		(TI_FLAGS + TI_FLAG_BYTE_CWP)
 #define TI_FPDEPTH	(TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
 #define TI_WSAVED	(TI_FLAGS + TI_FLAG_BYTE_WSAVED)
 #define TI_SYS_NOERROR	(TI_FLAGS + TI_FLAG_BYTE_NOERROR)
-#define TI_FPSAVED	0x00000010
-#define TI_KSP		0x00000018
-#define TI_FAULT_ADDR	0x00000020
-#define TI_KREGS	0x00000028
-#define TI_EXEC_DOMAIN	0x00000030
-#define TI_PRE_COUNT	0x00000038
-#define TI_NEW_CHILD	0x0000003c
-#define TI_CURRENT_DS	0x0000003d
-#define TI_CPU		0x0000003e
-#define TI_UTRAPS	0x00000040
-#define TI_REG_WINDOW	0x00000048
-#define TI_RWIN_SPTRS	0x000003c8
-#define TI_GSR		0x00000400
-#define TI_XFSR		0x00000438
-#define TI_RESTART_BLOCK 0x00000470
-#define TI_KUNA_REGS	0x000004a0
-#define TI_KUNA_INSN	0x000004a8
-#define TI_FPREGS	0x000004c0
+
+#endif /* (_ASM_OFFSETS_C) */
 
 /* We embed this in the uppermost byte of thread_info->flags */
 #define FAULT_CODE_WRITE	0x01	/* Write access, implies D-TLB	   */
arch/sparc/include/asm/trap_block.h +5 -22
index 7e26b2d..8877653 100644
@@ -81,30 +81,11 @@ extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
 	__sun4v_2insn_patch_end;
 
 
-#endif /* !(__ASSEMBLY__) */
-
-#define TRAP_PER_CPU_THREAD		0x00
-#define TRAP_PER_CPU_PGD_PADDR		0x08
-#define TRAP_PER_CPU_CPU_MONDO_PA	0x10
-#define TRAP_PER_CPU_DEV_MONDO_PA	0x18
-#define TRAP_PER_CPU_RESUM_MONDO_PA	0x20
-#define TRAP_PER_CPU_RESUM_KBUF_PA	0x28
-#define TRAP_PER_CPU_NONRESUM_MONDO_PA	0x30
-#define TRAP_PER_CPU_NONRESUM_KBUF_PA	0x38
-#define TRAP_PER_CPU_FAULT_INFO		0x40
-#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA	0xc0
-#define TRAP_PER_CPU_CPU_LIST_PA	0xc8
-#define TRAP_PER_CPU_TSB_HUGE		0xd0
-#define TRAP_PER_CPU_TSB_HUGE_TEMP	0xd8
-#define TRAP_PER_CPU_IRQ_WORKLIST_PA	0xe0
-#define TRAP_PER_CPU_CPU_MONDO_QMASK	0xe8
-#define TRAP_PER_CPU_DEV_MONDO_QMASK	0xec
-#define TRAP_PER_CPU_RESUM_QMASK	0xf0
-#define TRAP_PER_CPU_NONRESUM_QMASK	0xf4
-#define TRAP_PER_CPU_PER_CPU_BASE	0xf8
+#else /* (__ASSEMBLY__) */
 
 #define TRAP_BLOCK_SZ_SHIFT		8
 
+#include <asm/asm-offsets.h>
 #include <asm/scratchpad.h>
 
 #define __GET_CPUID(REG)				\
@@ -179,7 +160,7 @@ extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
 	add	REG2, REG1, REG2;			\
 	ldx	[REG2 + TRAP_PER_CPU_PER_CPU_BASE], DEST;
 
-#else
+#else /* !(CONFIG_SMP) */
 
 #define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
 	sethi	%hi(trap_block), DEST;		\
@@ -204,4 +185,6 @@ extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
 
 #endif /* !(CONFIG_SMP) */
 
+#endif /* (__ASSEMBLY__) */
+
 #endif /* _SPARC_TRAP_BLOCK_H */
arch/sparc/kernel/asm-offsets.c +66 -9

102 lines not on this page · raw message

arch/sparc/kernel/traps_64.c +0 -60

66 lines not on this page · raw message

arch/sparc/power/hibernate_asm.S +1 -1
index 7994216..8b20337 100644
@@ -6,7 +6,7 @@
 
 #include <linux/linkage.h>
 
-#include <asm/asm-offsets.h>
+#include <asm/hibernate.h>
 #include <asm/cpudata.h>
 #include <asm/page.h>
 
maintainer
#1 lore raw

From: Kirill Tkhai <[email protected]>
Date: Sat, 23 Mar 2013 15:44:55 +0400

Quoted 6 lines

1)Calculate offset of members of thread_info, trap_per_cpu and tsb_config in asm-offset.c
2)Replace DEFINE(*, offsetof(...)) with OFFSET(...)
3)Inify using of asm-offset.h in header files

Things are done this way on purpose.

When the offsets change, I don't want the code to just automatically adjust the assembler offset defines.

Instead, I want whoever changes things in this area to carefully analyze the side effects.

For example, if anyone adds members, it now makes the trap block larger than the power of 2 it currently is, and that means the shift used to compute a cpu number to a trap block offset no longer works.

Also, if members are moved, cache alignment of adjoining members means that rearrangement must be done carefully.

This means, overall, nothing should happen automatically when people make changes to the trap block.