Skip to contentSkip to conversation

FAILED: patch "[PATCH] s390/qdio: cancel the ESTABLISH ccw after timeout" failed to apply to 4.19-stable tree

PATCH [email protected] 1 participant 1 message Sep 15, 2021

Subsystems (3)
Stable branch s390 s390 common I/O layer
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 1c1dc8bda3a05c60877a6649775894db5343bdea Mon Sep 17 00:00:00 2001
From: Julian Wiedmann <[email protected]>
Date: Mon, 31 May 2021 18:33:02 +0300
Subject: [PATCH] s390/qdio: cancel the ESTABLISH ccw after timeout

When the ESTABLISH ccw does not complete within the specified timeout, try our best to cancel the ccw program that is still active on the device. Otherwise the IO subsystem might be accessing it even after the driver eg. called qdio_free().

Fixes 779e6e1c724d ("[S390] qdio: new qdio driver.")
Signed-off-by Julian Wiedmann <[email protected]>
Reviewed-by Benjamin Block <[email protected]>
Cc <[email protected]> # 2.6.27
Signed-off-by Heiko Carstens <[email protected]>
drivers/s390/cio/qdio_main.c +30 -21
index 32c8c46b19b6..3567912440dc 100644
@@ -890,6 +890,33 @@ static void qdio_shutdown_queues(struct qdio_irq *irq_ptr)
 	}
 }
 
+static int qdio_cancel_ccw(struct qdio_irq *irq, int how)
+{
+	struct ccw_device *cdev = irq->cdev;
+	int rc;
+
+	spin_lock_irq(get_ccwdev_lock(cdev));
+	qdio_set_state(irq, QDIO_IRQ_STATE_CLEANUP);
+	if (how & QDIO_FLAG_CLEANUP_USING_CLEAR)
+		rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP);
+	else
+		/* default behaviour is halt */
+		rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP);
+	spin_unlock_irq(get_ccwdev_lock(cdev));
+	if (rc) {
+		DBF_ERROR("%4x SHUTD ERR", irq->schid.sch_no);
+		DBF_ERROR("rc:%4d", rc);
+		return rc;
+	}
+
+	wait_event_interruptible_timeout(cdev->private->wait_q,
+					 irq->state == QDIO_IRQ_STATE_INACTIVE ||
+					 irq->state == QDIO_IRQ_STATE_ERR,
+					 10 * HZ);
+
+	return 0;
+}
+
 /**
  * qdio_shutdown - shut down a qdio subchannel
  * @cdev: associated ccw device

@@ -927,27 +954,7 @@ int qdio_shutdown(struct ccw_device *cdev, int how)
 	qdio_shutdown_queues(irq_ptr);
 	qdio_shutdown_debug_entries(irq_ptr);
 
-	/* cleanup subchannel */
-	spin_lock_irq(get_ccwdev_lock(cdev));
-	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP);
-	if (how & QDIO_FLAG_CLEANUP_USING_CLEAR)
-		rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP);
-	else
-		/* default behaviour is halt */
-		rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP);
-	spin_unlock_irq(get_ccwdev_lock(cdev));
-	if (rc) {
-		DBF_ERROR("%4x SHUTD ERR", irq_ptr->schid.sch_no);
-		DBF_ERROR("rc:%4d", rc);
-		goto no_cleanup;
-	}
-
-	wait_event_interruptible_timeout(cdev->private->wait_q,
-		irq_ptr->state == QDIO_IRQ_STATE_INACTIVE ||
-		irq_ptr->state == QDIO_IRQ_STATE_ERR,
-		10 * HZ);
-
-no_cleanup:
+	rc = qdio_cancel_ccw(irq_ptr, how);
 	qdio_shutdown_thinint(irq_ptr);
 	qdio_shutdown_irq(irq_ptr);
 

@@ -1157,10 +1164,12 @@ int qdio_establish(struct ccw_device *cdev,
 	return 0;
 
 err_ccw_timeout:
+	qdio_cancel_ccw(irq_ptr, QDIO_FLAG_CLEANUP_USING_CLEAR);
 err_ccw_start:
 	qdio_shutdown_thinint(irq_ptr);
 err_thinint:
 	qdio_shutdown_irq(irq_ptr);
+	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
 	mutex_unlock(&irq_ptr->setup_mutex);
 	return rc;
 }