Skip to contentSkip to conversation

PCI: vmd: Assign a number to each VMD controller

PATCH Applied brookxu 3 participants 3 messages Sep 17, 2021 – Oct 7, 2021

Subsystems (3)
lore
Share & tools
lore

brookxu

author
#0 lore raw

PATCH v4 1/1 PCI: vmd: Assign a number to each VMD controller

From: Chunguang Xu <[email protected]>

If the system has multiple VMD controllers, the driver does not assign a number to each controller, so when analyzing the interrupt through /proc/interrupts, the names of all controllers are the same, which is not very convenient for problem analysis. Here, try to assign a number to each VMD controller.

---
v4: remove out label.
v3: update subject line.
v2: update commit message.

 drivers/pci/controller/vmd.c | 41 +++++++++++++++++++++++++++++++++--------
 1 file changed, 33 insertions(+), 8 deletions(-)
drivers/pci/controller/vmd.c +33 -8
index e3fcdfe..feaab36 100644
@@ -69,6 +69,8 @@ enum vmd_features {
 	VMD_FEAT_CAN_BYPASS_MSI_REMAP		= (1 << 4),
 };
 
+static DEFINE_IDA(vmd_instance_ida);
+
 /*
  * Lock for manipulating VMD IRQ lists.
  */
@@ -119,6 +121,8 @@ struct vmd_dev {
 	struct pci_bus		*bus;
 	u8			busn_start;
 	u8			first_vec;
+	char			*name;
+	int			instance;
 };
 
 static inline struct vmd_dev *vmd_from_bus(struct pci_bus *bus)
@@ -599,7 +603,7 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)
 		INIT_LIST_HEAD(&vmd->irqs[i].irq_list);
 		err = devm_request_irq(&dev->dev, pci_irq_vector(dev, i),
 				       vmd_irq, IRQF_NO_THREAD,
-				       "vmd", &vmd->irqs[i]);
+				       vmd->name, &vmd->irqs[i]);
 		if (err)
 			return err;
 	}
@@ -779,18 +783,32 @@ static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENOMEM;
 
 	vmd->dev = dev;
+	vmd->instance = ida_simple_get(&vmd_instance_ida, 0, 0, GFP_KERNEL);
+	if (vmd->instance < 0)
+		return vmd->instance;
+
+	vmd->name = kasprintf(GFP_KERNEL, "vmd%d", vmd->instance);
+	if (!vmd->name) {
+		err = -ENOMEM;
+		goto out_release_instance;
+	}
+
 	err = pcim_enable_device(dev);
 	if (err < 0)
-		return err;
+		goto out_release_instance;
 
 	vmd->cfgbar = pcim_iomap(dev, VMD_CFGBAR, 0);
-	if (!vmd->cfgbar)
-		return -ENOMEM;
+	if (!vmd->cfgbar) {
+		err = -ENOMEM;
+		goto out_release_instance;
+	}
 
 	pci_set_master(dev);
 	if (dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(64)) &&
-	    dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)))
-		return -ENODEV;
+	    dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32))) {
+		err = -ENODEV;
+		goto out_release_instance;
+	}
 
 	if (features & VMD_FEAT_OFFSET_FIRST_VECTOR)
 		vmd->first_vec = 1;
@@ -799,11 +817,16 @@ static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	pci_set_drvdata(dev, vmd);
 	err = vmd_enable_domain(vmd, features);
 	if (err)
-		return err;
+		goto out_release_instance;
 
 	dev_info(&vmd->dev->dev, "Bound to PCI domain %04x\n",
 		 vmd->sysdata.domain);
 	return 0;
+
+ out_release_instance:
+	ida_simple_remove(&vmd_instance_ida, vmd->instance);
+	kfree(vmd->name);
+	return err;
 }
 
 static void vmd_cleanup_srcu(struct vmd_dev *vmd)
@@ -824,6 +847,8 @@ static void vmd_remove(struct pci_dev *dev)
 	vmd_cleanup_srcu(vmd);
 	vmd_detach_resources(vmd);
 	vmd_remove_irq_domain(vmd);
+	ida_simple_remove(&vmd_instance_ida, vmd->instance);
+	kfree(vmd->name);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -848,7 +873,7 @@ static int vmd_resume(struct device *dev)
 	for (i = 0; i < vmd->msix_count; i++) {
 		err = devm_request_irq(dev, pci_irq_vector(pdev, i),
 				       vmd_irq, IRQF_NO_THREAD,
-				       "vmd", &vmd->irqs[i]);
+				       vmd->name, &vmd->irqs[i]);
 		if (err)
 			return err;
 	}
Signature · 1 line
1.8.3.1
Reviewed-by on v4 1/1
#1 lore raw

Hi!

Very nice!

Quoted 8 lines

If the system has multiple VMD controllers, the driver does not assign a number to each controller, so when analyzing the interrupt through /proc/interrupts, the names of all controllers are the same, which is not very convenient for problem analysis. Here, try to assign a number to each VMD controller.

Krzysztof

#2 lore raw
In reply to brookxu
Quoted 9 lines · brookxu

From: Chunguang Xu <[email protected]>

If the system has multiple VMD controllers, the driver does not assign a number to each controller, so when analyzing the interrupt through /proc/interrupts, the names of all controllers are the same, which is not very convenient for problem analysis. Here, try to assign a number to each VMD controller.

[...]

Applied to pci/vmd, thanks!

[1/1] PCI: vmd: Assign a number to each VMD controller

      https://git.kernel.org/lpieralisi/pci/c/42da7911b8

Thanks,
Lorenzo