patch "usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts" added to usb-linus
Subsystems (3)
This is a note to let you know that I've just added the patch titled
usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
From 362468830dd5bea8bf6ad5203b2ea61f8a4e8288 Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <[email protected]>
Date: Mon, 8 Nov 2021 11:28:32 +0100
Subject: usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts
The code that enables either BC_LVL or COMP_CHNG interrupt in tcpm_set_cc wrongly assumes that the interrupt is unmasked by writing 1 to the apropriate bit in the mask register. In fact, interrupts are enabled when the mask is 0, so the tcpm_set_cc enables interrupt for COMP_CHNG when it expects BC_LVL interrupt to be enabled.
This causes inability of the driver to recognize cable unplug events in host mode (unplug is recognized only via a COMP_CHNG interrupt).
In device mode this bug was masked by simultaneous triggering of the VBUS change interrupt, because of loss of VBUS when the port peer is providing power.
--- drivers/usb/typec/tcpm/fusb302.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/usb/typec/tcpm/fusb302.c +4 -2
@@ -669,25 +669,27 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc) ret =fusb302_i2c_mask_write (chip,FUSB_REG_MASK ,FUSB_REG_MASK_BC_LVL |FUSB_REG_MASK_COMP_CHNG , -FUSB_REG_MASK_COMP_CHNG ); +FUSB_REG_MASK_BC_LVL );if (ret <0 ) {fusb302_log (chip,"cannot set SRC interrupt, ret=%d" , ret); goto done; } chip->intr_comp_chng = true; + chip->intr_bc_lvl = false;break ;case TYPEC_CC_RD : ret =fusb302_i2c_mask_write (chip,FUSB_REG_MASK ,FUSB_REG_MASK_BC_LVL |FUSB_REG_MASK_COMP_CHNG , -FUSB_REG_MASK_BC_LVL ); +FUSB_REG_MASK_COMP_CHNG );if (ret <0 ) {fusb302_log (chip,"cannot set SRC interrupt, ret=%d" , ret); goto done; } chip->intr_bc_lvl = true; + chip->intr_comp_chng = false;break ;default :break ;
Signature · 1 line
2.34.0