patch "serial: tegra: Change lower tolerance baud rate limit for tegra20 and" added to tty-linus

This is a note to let you know that I've just added the patch titled

serial: tegra: Change lower tolerance baud rate limit for tegra20 and

to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From b40de7469ef135161c80af0e8c462298cc5dac00 Mon Sep 17 00:00:00 2001
From: Patrik John <[email protected]>
Date: Tue, 23 Nov 2021 14:27:38 +0100
Subject: serial: tegra: Change lower tolerance baud rate limit for tegra20 and
tegra30

The current implementation uses 0 as lower limit for the baud rate tolerance for tegra20 and tegra30 chips which causes isses on UART initialization as soon as baud rate clock is lower than required even when within the standard UART tolerance of +/- 4%.

This fix aligns the implementation with the initial commit description of +/- 4% tolerance for tegra chips other than tegra186 and tegra194.

---
 drivers/tty/serial/serial-tegra.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 45e2e4109acd..b6223fab0687 100644
@@ -1506,7 +1506,7 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = {
 	.fifo_mode_enable_status	= false,
 	.uart_max_port			= 5,
 	.max_dma_burst_bytes		= 4,
-	.error_tolerance_low_range	= 0,
+	.error_tolerance_low_range	= -4,
 	.error_tolerance_high_range	= 4,
 };
 

@@ -1517,7 +1517,7 @@ static struct tegra_uart_chip_data tegra30_uart_chip_data = {
 	.fifo_mode_enable_status	= false,
 	.uart_max_port			= 5,
 	.max_dma_burst_bytes		= 4,
-	.error_tolerance_low_range	= 0,
+	.error_tolerance_low_range	= -4,
 	.error_tolerance_high_range	= 4,
 };
 

2.34.0