i2c: tegra: use i2c_timings for bus clock freq
PATCH v3 1/1 i2c: tegra: use i2c_timings for bus clock freq
Use i2c_timings struct and corresponding methods to get bus clock frequency
--- drivers/i2c/busses/i2c-tegra.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-)
v2->v3: Removed unused variable 'err'.v1->v2: Added temp var for i2c_timings struct in function.
drivers/i2c/busses/i2c-tegra.c +9 -12
@@ -246,7 +246,7 @@ struct tegra_i2c_hw_feature {* @msg_buf: pointer to current message data * @msg_buf_remaining: size of unsent data in the message buffer * @msg_read: indicates that the transfer is a read access -* @bus_clk_rate: current I2C bus clock rate +* @timings: i2c timings information like bus frequency * @multimaster_mode: indicates that I2C controller is in multi-master mode * @tx_dma_chan: DMA transmit channel * @rx_dma_chan: DMA receive channel
@@ -273,7 +273,7 @@ struct tegra_i2c_dev {unsigned int nclocks;struct clk *div_clk; -u32 bus_clk_rate; +struct i2c_timings timings;struct completion msg_complete;size_t msg_buf_remaining;
@@ -610,6 +610,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) {u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh, non_hs_mode;acpi_handle handle =ACPI_HANDLE (i2c_dev->dev); +struct i2c_timings *t = &i2c_dev->timings;int err;/*
@@ -642,14 +643,14 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)if (i2c_dev->is_vi)tegra_i2c_vi_init (i2c_dev); -switch (i2c_dev->bus_clk_rate) { +switch (t->bus_freq_hz) { case I2C_MAX_STANDARD_MODE_FREQ + 1 ... I2C_MAX_FAST_MODE_PLUS_FREQ:default : tlow = i2c_dev->hw->tlow_fast_fastplus_mode; thigh = i2c_dev->hw->thigh_fast_fastplus_mode; tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode; -if (i2c_dev->bus_clk_rate >I2C_MAX_FAST_MODE_FREQ ) +if (t->bus_freq_hz >I2C_MAX_FAST_MODE_FREQ ) non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode;else non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode;
@@ -685,7 +686,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) clk_multiplier = (tlow + thigh +2 ) * (non_hs_mode +1 ); err =clk_set_rate (i2c_dev->div_clk, - i2c_dev->bus_clk_rate * clk_multiplier); + t->bus_freq_hz * clk_multiplier);if (err) {dev_err (i2c_dev->dev,"failed to set div-clk rate: %d\n" , err);return err;
@@ -724,7 +725,7 @@ static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)* before disabling the controller so that the STOP condition has * been delivered properly. */ -udelay (DIV_ROUND_UP (2 *1000000 , i2c_dev->bus_clk_rate)); +udelay (DIV_ROUND_UP (2 *1000000 , i2c_dev->timings.bus_freq_hz)); cnfg =i2c_readl (i2c_dev,I2C_CNFG );if (cnfg &I2C_CNFG_PACKET_MODE_EN )
@@ -1254,7 +1255,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,* Total bits = 9 bits per byte (including ACK bit) + Start & stop bits */ xfer_time +=DIV_ROUND_CLOSEST (((xfer_size *9 ) +2 ) *MSEC_PER_SEC , - i2c_dev->bus_clk_rate); + i2c_dev->timings.bus_freq_hz); int_mask =I2C_INT_NO_ACK |I2C_INT_ARBITRATION_LOST ;tegra_i2c_unmask_irq (i2c_dev, int_mask);
@@ -1631,12 +1632,8 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev) {struct device_node *np = i2c_dev->dev->of_node;bool multi_mode; -int err; - err =device_property_read_u32 (i2c_dev->dev,"clock-frequency" , - &i2c_dev->bus_clk_rate); -if (err) - i2c_dev->bus_clk_rate =I2C_MAX_STANDARD_MODE_FREQ ; +i2c_parse_fw_timings (i2c_dev->dev, &i2c_dev->timings, true); multi_mode =device_property_read_bool (i2c_dev->dev,"multi-master" ); i2c_dev->multimaster_mode = multi_mode;
Signature · 1 line
2.7.4
10.12.2021 15:15, Akhil R пишет:
Quoted 5 lines
Use
i2c_timingsstruct and corresponding methods to get bus clock frequencySigned-off-by Akhil R <[email protected]>Suggested-by Andy Shevchenko <[email protected]>Reviewed-by Andy Shevchenko <[email protected]>
Note that your s-b should be the last line of the commit message. No need to resend for that.
Quoted 6 lines
--- drivers/i2c/busses/i2c-tegra.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-)
v2->v3: Removed unused variable 'err'.v1->v2: Added temp var fori2c_timingsstruct in function.
Quoted 9 lines · Dmitry Osipenko
10.12.2021 15:15, Akhil R пишет:
Quoted 5 lines
Use
i2c_timingsstruct and corresponding methods to get bus clock frequencySigned-off-by Akhil R <[email protected]>Suggested-by Andy Shevchenko <[email protected]>Reviewed-by Andy Shevchenko <[email protected]>Note that your s-b should be the last line of the commit message. No need to resend for that.
AFAICT there is no such requirement in the documentation. It says that SoB should be last among SoBs, which is not broken here.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Dmitry Osipenko
reviewer10.12.2021 23:07, Andy Shevchenko пишет:
Quoted 8 lines · Dmitry Osipenko
Quoted 7 lines
10.12.2021 15:15, Akhil R пишет:
Quoted 5 lines
Use
i2c_timingsstruct and corresponding methods to get bus clock frequencySigned-off-by Akhil R <[email protected]>Suggested-by Andy Shevchenko <[email protected]>Reviewed-by Andy Shevchenko <[email protected]>
Quoted 5 lines
Quoted 2 lines
Note that your s-b should be the last line of the commit message. No need to resend for that.
AFAICT there is no such requirement in the documentation. It says that SoB should be last among SoBs, which is not broken here.
Correct, that's why I said no need to resend.
Wolfram Sang
AppliedQuoted 5 lines · Akhil R
Use
i2c_timingsstruct and corresponding methods to get bus clock frequencySigned-off-by Akhil R <[email protected]>Suggested-by Andy Shevchenko <[email protected]>Reviewed-by Andy Shevchenko <[email protected]>
Applied to for-next, thanks!