Skip to contentSkip to conversation

FAILED: patch "[PATCH] media: flexcop-usb: fix control-message timeouts" failed to apply to 4.4-stable tree

PATCH [email protected] 1 participant 1 message Jan 23, 2022

Subsystems (2)
Stable branch Media (V4L/DVB)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From cd1798a387825cc4a51282f5a611ad05bb1ad75f Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Mon, 25 Oct 2021 13:16:36 +0100
Subject: [PATCH] media: flexcop-usb: fix control-message timeouts

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Note that the driver was multiplying some of the timeout values with HZ twice resulting in 3000-second timeouts with HZ=1000.

Also note that two of the timeout defines are currently unused.

Fixes 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc [email protected] # 3.0
Signed-off-by Johan Hovold <[email protected]>
Signed-off-by Hans Verkuil <[email protected]>
Signed-off-by Mauro Carvalho Chehab <[email protected]>
drivers/media/usb/b2c2/flexcop-usb.c +5 -5
index 5d38171b7638..bfeb92d93de3 100644
@@ -87,7 +87,7 @@ static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI,
 			0,
 			fc_usb->data,
 			sizeof(u32),
-			B2C2_WAIT_FOR_OPERATION_RDW * HZ);
+			B2C2_WAIT_FOR_OPERATION_RDW);
 
 	if (ret != sizeof(u32)) {
 		err("error while %s dword from %d (%d).", read ? "reading" :

@@ -155,7 +155,7 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
 			wIndex,
 			fc_usb->data,
 			buflen,
-			nWaitTime * HZ);
+			nWaitTime);
 	if (ret != buflen)
 		ret = -EIO;
 

@@ -248,13 +248,13 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
 		/* DKT 020208 - add this to support special case of DiSEqC */
 	case USB_FUNC_I2C_CHECKWRITE:
 		pipe = B2C2_USB_CTRL_PIPE_OUT;
-		nWaitTime = 2;
+		nWaitTime = 2000;
 		request_type |= USB_DIR_OUT;
 		break;
 	case USB_FUNC_I2C_READ:
 	case USB_FUNC_I2C_REPEATREAD:
 		pipe = B2C2_USB_CTRL_PIPE_IN;
-		nWaitTime = 2;
+		nWaitTime = 2000;
 		request_type |= USB_DIR_IN;
 		break;
 	default:

@@ -281,7 +281,7 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
 			wIndex,
 			fc_usb->data,
 			buflen,
-			nWaitTime * HZ);
+			nWaitTime);
 
 	if (ret != buflen)
 		ret = -EIO;
drivers/media/usb/b2c2/flexcop-usb.h +6 -6
index 2f230bf72252..c7cca1a5ee59 100644
@@ -91,13 +91,13 @@ typedef enum {
 	UTILITY_SRAM_TESTVERIFY     = 0x16,
 } flexcop_usb_utility_function_t;
 
-#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
-#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
+#define B2C2_WAIT_FOR_OPERATION_RW 1000
+#define B2C2_WAIT_FOR_OPERATION_RDW 3000
+#define B2C2_WAIT_FOR_OPERATION_WDW 1000
 
-#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8READ 3000
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3000
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3000
 
 typedef enum {
 	V8_MEMORY_PAGE_DVB_CI = 0x20,