EFI: Reset system after capsule-on-disk
cover EFI: Reset system after capsule-on-disk
Hi,
According to Takahiro's suggestion and discussion, I made a patchset to update the EFI capsule-on-disk, so that it does not use UpdateCapsule() EFI API and reset after completing the capsule-on-disk.
The reset after completing the capsule-on-disk is stated in the UEFI specification 2.9, section 8.5.5 "Delivery of Capsules via file on Mass Storage device" as below,
In all cases that a capsule is identified for processing the system is restarted after capsule processing is completed.
Note that this feature is enabled by CONFIG_EFI_RESET_AFTER_CAPSULE_ON_DISK. If you want to keep the current firmware runs after capsule-on-disk (e.g. for debugging), you can configure it disabled.
Thank you,
---
Masami Hiramatsu (2):
efi_loader: Avoid using efi_update_capsule() from update capsule on disk
efi_loader: Reset system after CapsuleUpdate on disk
lib/efi_loader/Kconfig | 10 ++++++++++ lib/efi_loader/efi_capsule.c | 18 +++++++++++++++++- 2 files changed, 27 insertions(+), 1 deletion(-)
--
Masami Hiramatsu <[email protected]>
PATCH 1/2 efi_loader: Avoid using efi_update_capsule() from update capsule on disk
The efi_update_capsule() may have to handle the capsule flags as an UEFI runtime and boottime service, but the capsule-on-disk process doesn't. Thus, the capsule-on-disk should use the efi_capsule_update_firmware() directly instead of efi_update_capsule(). To keep the consistency ESRT also will be updated after all capsule updates are completed.
--- lib/efi_loader/efi_capsule.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
lib/efi_loader/efi_capsule.c +8 -1
@@ -1118,7 +1118,7 @@ efi_status_t efi_launch_capsules(void) index =0 ; ret =efi_capsule_read_file (files[i], &capsule);if (ret ==EFI_SUCCESS ) { - ret =EFI_CALL (efi_update_capsule (&capsule,1 ,0 )); + ret =efi_capsule_update_firmware (&capsule);if (ret !=EFI_SUCCESS )log_err ("Applying capsule %ls failed\n" , files[i]);
@@ -1142,6 +1142,13 @@ efi_status_t efi_launch_capsules(void)free (files[i]);free (files); +if (IS_ENABLED (CONFIG_EFI_ESRT )) { +/* Rebuild the ESRT to reflect any updated FW images. */ + ret =efi_esrt_populate (); +if (ret !=EFI_SUCCESS ) +log_warning ("ESRT update failed\n" ); + } + return ret; }#endif /* CONFIG_EFI_CAPSULE_ON_DISK */
PATCH 2/2 efi_loader: Reset system after CapsuleUpdate on disk
In reply to Masami HiramatsuAdd a config option to reset system soon after processing capsule update on disk. This is required in UEFI specification 2.9 Section 8.5.5
"Delivery of Capsules via file on Mass Storage device" as;
In all cases that a capsule is identified for processing the system is restarted after capsule processing is completed.
--- lib/efi_loader/Kconfig | 10 ++++++++++ lib/efi_loader/efi_capsule.c | 9 +++++++++ 2 files changed, 19 insertions(+)
lib/efi_loader/Kconfig +10 -0
@@ -146,6 +146,16 @@ config EFI_IGNORE_OSINDICATIONS without setting the EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED flag in variable OsIndications. +config EFI_RESET_AFTER_CAPSULE_ON_DISK + bool "Reset right after CapsuleUpdate on-disk" + depends on EFI_CAPSULE_ON_DISK + default y + help + UEFI specification requests the system to be restarted after capsule + processing is complete. This implements that, but for some reason, + if you want to keep the (old) system running after the capsule update + on-disk, you can say 'n' here. + config EFI_CAPSULE_ON_DISK_EARLY bool "Initiate capsule-on-disk at U-Boot boottime" depends on EFI_CAPSULE_ON_DISK
lib/efi_loader/efi_capsule.c +9 -0
@@ -1142,6 +1142,15 @@ efi_status_t efi_launch_capsules(void)free (files[i]);free (files); +/* +* UEFI spec requires to reset system after complete processing capsule +* update on the storage. +*/ +if (IS_ENABLED (CONFIG_EFI_RESET_AFTER_CAPSULE_ON_DISK )) { +log_info ("Restarting the system to boot the updated firmware.\n" ); +do_reset (NULL ,0 ,0 ,NULL ); + } +if (IS_ENABLED (CONFIG_EFI_ESRT )) {/* Rebuild the ESRT to reflect any updated FW images. */ ret =efi_esrt_populate ();
Re: [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk
Quoted 8 lines · Masami Hiramatsu
Add a config option to reset system soon after processing capsule update on disk. This is required in UEFI specification 2.9 Section 8.5.5
"Delivery of Capsules via file on Mass Storage device" as;In all cases that a capsule is identified for processing the system is restarted after capsule processing is completed.
Signed-off-by Masami Hiramatsu <[email protected]>
Is there known use cases for making this an option? Feels a bit like option creep that is too easy to choose the wrong setting.
Otherwise, this looks good to me.
g.
Quoted 37 lines
--- lib/efi_loader/Kconfig | 10 ++++++++++ lib/efi_loader/efi_capsule.c | 9 +++++++++ 2 files changed, 19 insertions(+)lib/efi_loader/Kconfig +10
-0@@ -146,6 +146,16 @@ config EFI_IGNORE_OSINDICATIONS without setting the EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED flag in variable OsIndications. +config EFI_RESET_AFTER_CAPSULE_ON_DISK + bool "Reset right after CapsuleUpdate on-disk" + depends on EFI_CAPSULE_ON_DISK + default y + help + UEFI specification requests the system to be restarted after capsule + processing is complete. This implements that, but for some reason, + if you want to keep the (old) system running after the capsule update + on-disk, you can say 'n' here. + config EFI_CAPSULE_ON_DISK_EARLY bool "Initiate capsule-on-disk at U-Boot boottime" depends on EFI_CAPSULE_ON_DISKlib/efi_loader/efi_capsule.c +2
-0@@ -1142,6 +1142,15 @@ efi_status_t efi_launch_capsules(void)free (files[i]);free (files); +/* +* UEFI spec requires to reset system after complete processing capsule
lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1156
Quoted 10 lines
lib/efi_loader/efi_capsule.c +7
-0+* update on the storage. +*/ +if (IS_ENABLED (CONFIG_EFI_RESET_AFTER_CAPSULE_ON_DISK )) { +log_info ("Restarting the system to boot the updated firmware.\n" ); +do_reset (NULL ,0 ,0 ,NULL ); + } +if (IS_ENABLED (CONFIG_EFI_ESRT )) {/* Rebuild the ESRT to reflect any updated FW images. */ ret =efi_esrt_populate ();
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Re: [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk
Quoted 56 lines · Grant Likely
Quoted 9 lines · Masami Hiramatsu
Add a config option to reset system soon after processing capsule update on disk. This is required in UEFI specification 2.9 Section 8.5.5 "Delivery of Capsules via file on Mass Storage device" as;
In all cases that a capsule is identified for processing the system is
restarted after capsule processing is completed.Signed-off-by Masami Hiramatsu <[email protected]>Is there known use cases for making this an option? Feels a bit like option creep that is too easy to choose the wrong setting.
Otherwise, this looks good to me.
g.
Quoted 38 lines
---
lib/efi_loader/Kconfig | 10 ++++++++++
lib/efi_loader/efi_capsule.c| 9 +++++++++2 files changed, 19 insertions(+)lib/efi_loader/Kconfig +0
-0@@ -146,6 +146,16 @@ config EFI_IGNORE_OSINDICATIONSwithout setting the
EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTEDflag in variable OsIndications.+config
EFI_RESET_AFTER_CAPSULE_ON_DISK
+ bool "Reset right after CapsuleUpdate on-disk"
+ depends onEFI_CAPSULE_ON_DISK
+ default y
+ help
+ UEFI specification requests the system to be restarted after capsule
+ processing is complete. This implements that, but for some reason,
+ if you want to keep the (old) system running after the capsule update
+ on-disk, you can say 'n' here.
+
configEFI_CAPSULE_ON_DISK_EARLY
bool "Initiate capsule-on-disk at U-Boot boottime" depends onEFI_CAPSULE_ON_DISKlib/efi_loader/efi_capsule.c +0
-0@@ -1142,6 +1142,15 @@ efi_status_t efi_launch_capsules(void) free(files[i]); free(files);
Quoted 6 lines
Quoted 6 lines
lib/efi_loader/efi_capsule.c +2
-0+ /* +* UEFI spec requires to reset system after complete processing capsule
+ * update on the storage.
+ */
+ if (IS_ENABLED(CONFIG_EFI_RESET_AFTER_CAPSULE_ON_DISK)) {
We should not allow configuring a non-compliant behavior.
Quoted 2 lines
Quoted 2 lines
+
log_info("Restarting the system to boot the updated firmware.\n");
I am missing a success message for each installed capsule.
Quoted 1 line
Quoted 1 line
+
do_reset(NULL, 0, 0, NULL);
do_reset() may return. How about:
panic("Reboot after firmware update");This will hang if do_reset() returns.
Quoted 3 lines
Quoted 3 lines
+ }
+
if (IS_ENABLED(CONFIG_EFI_ESRT)) {
We don't need this code anymore if we call panic() above.
Best regards
Heinrich
Quoted 4 lines
Quoted 3 lines
/* Rebuild the ESRT to reflect any updated FW images. */ ret =
efi_esrt_populate();
Re: [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk
In reply to Grant LikelyHi Grant,
2022年1月31日(月) 20:20 Grant Likely <[email protected]>:
Quoted 6 lines · Masami Hiramatsu
Quoted 4 lines
Add a config option to reset system soon after processing capsule update on disk. This is required in UEFI specification 2.9 Section 8.5.5
"Delivery of Capsules via file on Mass Storage device" as;
Quoted 7 lines
Quoted 4 lines
In all cases that a capsule is identified for processing the system is restarted after capsule processing is completed.
Signed-off-by Masami Hiramatsu <[email protected]>Is there known use cases for making this an option? Feels a bit like option creep that is too easy to choose the wrong setting.
No, I just guessed that it may be helpful for porting FWU, because we can check whether the metadata is updated correctly before reboot. (anyway, while developing we can just comment out the code too.)
Thank you,
Quoted 54 lines
Otherwise, this looks good to me.
g.
Quoted 37 lines
--- lib/efi_loader/Kconfig | 10 ++++++++++ lib/efi_loader/efi_capsule.c | 9 +++++++++ 2 files changed, 19 insertions(+)lib/efi_loader/Kconfig +10
-0@@ -146,6 +146,16 @@ config EFI_IGNORE_OSINDICATIONS without setting the EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED flag in variable OsIndications. +config EFI_RESET_AFTER_CAPSULE_ON_DISK + bool "Reset right after CapsuleUpdate on-disk" + depends on EFI_CAPSULE_ON_DISK + default y + help + UEFI specification requests the system to be restarted after capsule + processing is complete. This implements that, but for some reason, + if you want to keep the (old) system running after the capsule update + on-disk, you can say 'n' here. + config EFI_CAPSULE_ON_DISK_EARLY bool "Initiate capsule-on-disk at U-Boot boottime" depends on EFI_CAPSULE_ON_DISKlib/efi_loader/efi_capsule.c +2
-0@@ -1142,6 +1142,15 @@ efi_status_t efi_launch_capsules(void)free (files[i]);free (files); +/* +* UEFI spec requires to reset system after complete processing capsule lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1156
Quoted 10 lines
lib/efi_loader/efi_capsule.c +7
-0+* update on the storage. +*/ +if (IS_ENABLED (CONFIG_EFI_RESET_AFTER_CAPSULE_ON_DISK )) { +log_info ("Restarting the system to boot the updated firmware.\n" ); +do_reset (NULL ,0 ,0 ,NULL ); + } +if (IS_ENABLED (CONFIG_EFI_ESRT )) {/* Rebuild the ESRT to reflect any updated FW images. */ ret =efi_esrt_populate ();IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Signature · 1 line
Masami Hiramatsu
Re: [PATCH 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk
In reply to Masami HiramatsuQuoted 17 lines · Masami Hiramatsu
The
efi_update_capsule()may have to handle the capsule flags as an UEFI runtime and boottime service, but the capsule-on-disk process doesn't. Thus, the capsule-on-disk should use theefi_capsule_update_firmware()directly instead ofefi_update_capsule(). To keep the consistency ESRT also will be updated after all capsule updates are completed.Suggested-by AKASHI Takahiro <[email protected]>Signed-off-by Masami Hiramatsu <[email protected]>--- lib/efi_loader/efi_capsule.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)lib/efi_loader/efi_capsule.c +0
-0
lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1121
Quoted 5 lines
lib/efi_loader/efi_capsule.c +1
-1@@ -1118,7 +1118,7 @@ efi_status_t efi_launch_capsules(void) index =0 ; ret =efi_capsule_read_file (files[i], &capsule);if (ret ==EFI_SUCCESS ) { - ret =EFI_CALL (efi_update_capsule (&capsule,1 ,0 )); + ret =efi_capsule_update_firmware (&capsule);
Thanks for the patch. This look better.
Quoted 4 lines
lib/efi_loader/efi_capsule.c +0
-0if (ret !=EFI_SUCCESS )log_err ("Applying capsule %ls failed\n" , files[i]);
lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1151
Quoted 10 lines
lib/efi_loader/efi_capsule.c +7
-0@@ -1142,6 +1142,13 @@ efi_status_t efi_launch_capsules(void)free (files[i]);free (files); +if (IS_ENABLED (CONFIG_EFI_ESRT )) { +/* Rebuild the ESRT to reflect any updated FW images. */ + ret =efi_esrt_populate (); +if (ret !=EFI_SUCCESS ) +log_warning ("ESRT update failed\n" ); + } +
This is not needed as you want to reboot.
Best regards
Heinrich
Quoted 4 lines
lib/efi_loader/efi_capsule.c +0
-0return ret; }#endif /* CONFIG_EFI_CAPSULE_ON_DISK */
Re: [PATCH 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk
Hi Heinrich,
Thanks for review.
2022年2月1日(火) 4:26 Heinrich Schuchardt <[email protected]>:
Quoted 34 lines · Masami Hiramatsu
Quoted 17 lines
The
efi_update_capsule()may have to handle the capsule flags as an UEFI runtime and boottime service, but the capsule-on-disk process doesn't. Thus, the capsule-on-disk should use theefi_capsule_update_firmware()directly instead ofefi_update_capsule(). To keep the consistency ESRT also will be updated after all capsule updates are completed.Suggested-by AKASHI Takahiro <[email protected]>Signed-off-by Masami Hiramatsu <[email protected]>--- lib/efi_loader/efi_capsule.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)lib/efi_loader/efi_capsule.c +0
-0lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1121
Quoted 5 lines
lib/efi_loader/efi_capsule.c +1
-1@@ -1118,7 +1118,7 @@ efi_status_t efi_launch_capsules(void) index =0 ; ret =efi_capsule_read_file (files[i], &capsule);if (ret ==EFI_SUCCESS ) { - ret =EFI_CALL (efi_update_capsule (&capsule,1 ,0 )); + ret =efi_capsule_update_firmware (&capsule);Thanks for the patch. This look better.
Quoted 7 lines
lib/efi_loader/efi_capsule.c +0
-0if (ret !=EFI_SUCCESS )log_err ("Applying capsule %ls failed\n" , files[i]);@@ -1142,6 +1142,13 @@ efi_status_t efi_launch_capsules(void)free (files[i]);free (files);
Quoted 9 lines
lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1151
Quoted 7 lines
lib/efi_loader/efi_capsule.c +7
-0+if (IS_ENABLED (CONFIG_EFI_ESRT )) { +/* Rebuild the ESRT to reflect any updated FW images. */ + ret =efi_esrt_populate (); +if (ret !=EFI_SUCCESS ) +log_warning ("ESRT update failed\n" ); + } +This is not needed as you want to reboot.
Yes, OK. I'll drop this part.
Thank you,
Quoted 11 lines
Best regards
Heinrich
Quoted 4 lines
lib/efi_loader/efi_capsule.c +0
-0return ret; }#endif /* CONFIG_EFI_CAPSULE_ON_DISK */
Signature · 1 line
Masami Hiramatsu
Re: [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk
In reply to Heinrich SchuchardtHi Heinrich,
2022年1月31日(月) 21:17 Heinrich Schuchardt <[email protected]>:
Quoted 58 lines · Grant Likely
Quoted 56 lines · Masami Hiramatsu
Quoted 9 lines
Add a config option to reset system soon after processing capsule update on disk. This is required in UEFI specification 2.9 Section 8.5.5
"Delivery of Capsules via file on Mass Storage device" as;In all cases that a capsule is identified for processing the
system is
restarted after capsule processing is completed.Signed-off-by Masami Hiramatsu <[email protected]>Is there known use cases for making this an option? Feels a bit like option creep that is too easy to choose the wrong setting.
Otherwise, this looks good to me.
g.
Quoted 38 lines
--- lib/efi_loader/Kconfig | 10 ++++++++++ lib/efi_loader/efi_capsule.c | 9 +++++++++ 2 files changed, 19 insertions(+)lib/efi_loader/Kconfig +0
-0@@ -146,6 +146,16 @@ config EFI_IGNORE_OSINDICATIONS without setting the
EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED
flag in variable OsIndications.lib/efi_loader/Kconfig +6
-0+config EFI_RESET_AFTER_CAPSULE_ON_DISK + bool "Reset right after CapsuleUpdate on-disk" + depends on EFI_CAPSULE_ON_DISK + default y + help + UEFI specification requests the system to be restarted aftercapsule
+ processing is complete. This implements that, but for some
reason,
+ if you want to keep the (old) system running after the capsule
updatelib/efi_loader/Kconfig +2
-0+ on-disk, you can say 'n' here. + config EFI_CAPSULE_ON_DISK_EARLY bool "Initiate capsule-on-disk at U-Boot boottime" depends on EFI_CAPSULE_ON_DISKlib/efi_loader/efi_capsule.c +0
-0@@ -1142,6 +1142,15 @@ efi_status_t efi_launch_capsules(void)free (files[i]);free (files);
Quoted 8 lines
Quoted 6 lines
lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1149
Quoted 6 lines
lib/efi_loader/efi_capsule.c +2
-0+/* +* UEFI spec requires to reset system after complete processing capsule
lib/efi_loader/efi_capsule.c +3
-0+* update on the storage. +*/ +if (IS_ENABLED (CONFIG_EFI_RESET_AFTER_CAPSULE_ON_DISK )) {We should not allow configuring a non-compliant behavior.
OK, let me remove this option then.
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
+ log_info("Restarting the system to boot the updated
firmware.\n");I am missing a success message for each installed capsule.
Indeed, but this reboot will be done unconditionally.
let me add a message when the capsule update is successfully completed. Thank you,
Quoted 13 lines
Quoted 2 lines
Quoted 2 lines
+
do_reset(NULL, 0, 0, NULL);
do_reset()may return. How about:panic("Reboot after firmware update");This will hang if
do_reset()returns.Quoted 3 lines
lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1154
Quoted 3 lines
lib/efi_loader/efi_capsule.c +2
-0+ } +if (IS_ENABLED (CONFIG_EFI_ESRT )) {
Quoted 10 lines
We don't need this code anymore if we call
panic()above.Best regards
Heinrich
Quoted 4 lines
Quoted 3 lines
/* Rebuild the ESRT to reflect any updated FW images. */ ret = efi_esrt_populate();
--
Masami Hiramatsu
Re: [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk
Quoted 73 lines · Masami Hiramatsu
Hi Heinrich,
2022年1月31日(月) 21:17 Heinrich Schuchardt <[email protected]>:
Quoted 58 lines · Grant Likely
Quoted 56 lines · Masami Hiramatsu
Quoted 9 lines
Add a config option to reset system soon after processing capsule update on disk. This is required in UEFI specification 2.9 Section 8.5.5
"Delivery of Capsules via file on Mass Storage device" as;In all cases that a capsule is identified for processing the
system is
restarted after capsule processing is completed.Signed-off-by Masami Hiramatsu <[email protected]>Is there known use cases for making this an option? Feels a bit like option creep that is too easy to choose the wrong setting.
Otherwise, this looks good to me.
g.
Quoted 38 lines
--- lib/efi_loader/Kconfig | 10 ++++++++++ lib/efi_loader/efi_capsule.c | 9 +++++++++ 2 files changed, 19 insertions(+)lib/efi_loader/Kconfig +0
-0@@ -146,6 +146,16 @@ config EFI_IGNORE_OSINDICATIONS without setting the
EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED
flag in variable OsIndications.lib/efi_loader/Kconfig +6
-0+config EFI_RESET_AFTER_CAPSULE_ON_DISK + bool "Reset right after CapsuleUpdate on-disk" + depends on EFI_CAPSULE_ON_DISK + default y + help + UEFI specification requests the system to be restarted aftercapsule
+ processing is complete. This implements that, but for some
reason,
+ if you want to keep the (old) system running after the capsule
updatelib/efi_loader/Kconfig +2
-0+ on-disk, you can say 'n' here. + config EFI_CAPSULE_ON_DISK_EARLY bool "Initiate capsule-on-disk at U-Boot boottime" depends on EFI_CAPSULE_ON_DISKlib/efi_loader/efi_capsule.c +0
-0@@ -1142,6 +1142,15 @@ efi_status_t efi_launch_capsules(void)free (files[i]);free (files);Quoted 8 lines
Quoted 6 lines
lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1149
Quoted 6 lines
lib/efi_loader/efi_capsule.c +2
-0+/* +* UEFI spec requires to reset system after complete processing capsule
lib/efi_loader/efi_capsule.c +3
-0+* update on the storage. +*/ +if (IS_ENABLED (CONFIG_EFI_RESET_AFTER_CAPSULE_ON_DISK )) {We should not allow configuring a non-compliant behavior.
OK, let me remove this option then.
Quoted 1 line
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Quoted 2 lines
+ log_info("Restarting the system to boot the updated
firmware.\n");I am missing a success message for each installed capsule.
Indeed, but this reboot will be done unconditionally.
let me add a message when the capsule update is successfully completed. Thank you,
While I don't object to adding a message, I'd rather see that a sub-command, like "efidebug capsule show-result," be added to efidebug command. Please note the result for each capsule will be recorded in "CapsuleNNNN" variable which may contain additional information.
(I haven't implemented efi_variable_result_fmp though.)
-Takahiro Akashi
Quoted 29 lines
Quoted 14 lines
Quoted 3 lines
Quoted 3 lines
+
do_reset(NULL, 0, 0, NULL);
do_reset()may return. How about:panic("Reboot after firmware update");This will hang if
do_reset()returns.Quoted 3 lines
lib/efi_loader/efi_capsule.c efi_status_t efi_launch_capsules(void) · line 1154
Quoted 3 lines
lib/efi_loader/efi_capsule.c +2
-0+ } +if (IS_ENABLED (CONFIG_EFI_ESRT )) {Quoted 10 lines
We don't need this code anymore if we call
panic()above.Best regards
Heinrich
Quoted 4 lines
Quoted 3 lines
/* Rebuild the ESRT to reflect any updated FW images. */ ret = efi_esrt_populate();--
Masami Hiramatsu