net/netvsc: fix issues with hot adding multiple VF PCI devices
PATCH 1/1 net/netvsc: fix issues with hot adding multiple VF PCI devices
From: Long Li <[email protected]>
This patch fixes two issues with hot removing/adding a VF PCI device:
1. The original device argument is lost when it's hot added
2. If there are multiple VFs hot adding at the same time, some of the VFs may not get added successfully because only one single VF status is stored in the netvsc.
Fix these by storing the original device arguments and maintain a list of hot add contexts to deal with multiple VF devices.
--- drivers/net/netvsc/hn_ethdev.c | 78 +++++++++++++++++++++++++++------- drivers/net/netvsc/hn_var.h | 12 +++++- drivers/net/netvsc/hn_vf.c | 4 ++ 3 files changed, 77 insertions(+), 17 deletions(-)
drivers/net/netvsc/hn_ethdev.c +63 -15
@@ -554,9 +554,10 @@ static int hn_subchan_configure(struct hn_data *hv,static void netvsc_hotplug_retry (void *args) {int ret; -struct hn_data *hv = args; +struct hv_hotadd_context *hot_ctx = args; +struct hn_data *hv = hot_ctx->hv;struct rte_eth_dev *dev = &rte_eth_devices[hv->port_id]; -struct rte_devargs *d = &hv->devargs; +struct rte_devargs *d = &hot_ctx->da;char buf[256 ];DIR *di;
@@ -566,10 +567,13 @@ static void netvsc_hotplug_retry(void *args)int s;PMD_DRV_LOG (DEBUG ,"%s: retry count %d" , - __func__, hv->eal_hot_plug_retry); + __func__, hot_ctx->eal_hot_plug_retry); -if (hv->eal_hot_plug_retry++ >NETVSC_MAX_HOTADD_RETRY ) -return ; +if (hot_ctx->eal_hot_plug_retry++ >NETVSC_MAX_HOTADD_RETRY ) { +PMD_DRV_LOG (NOTICE ,"Failed to parse PCI device retry=%d" , + hot_ctx->eal_hot_plug_retry); + goto free_hotadd_ctx; + }snprintf (buf,sizeof (buf),"/sys/bus/pci/devices/%s/net" , d->name); di =opendir (buf);
@@ -602,7 +606,7 @@ static void netvsc_hotplug_retry(void *args) }if (req.ifr_hwaddr.sa_family !=ARPHRD_ETHER ) {closedir (di); -return ; + goto free_hotadd_ctx; }memcpy (eth_addr.addr_bytes, req.ifr_hwaddr.sa_data,RTE_DIM (eth_addr.addr_bytes));
@@ -611,8 +615,13 @@ static void netvsc_hotplug_retry(void *args)PMD_DRV_LOG (NOTICE ,"Found matching MAC address, adding device %s network name %s" , d->name, dir->d_name); + +/* If this device has been hot removed from this +* parent device, restore its args. +*/ ret =rte_eal_hotplug_add (d->bus->name, d->name, - d->args); + hv->vf_devargs ? + hv->vf_devargs :"" );if (ret) { PMD_DRV_LOG(ERR, "Failed to add PCI device %s",
@@ -624,12 +633,20 @@ static void netvsc_hotplug_retry(void *args)* the device, or its MAC address did not match. */ closedir (di); -return ; + goto free_hotadd_ctx; }closedir (di); retry:/* The device is still being initialized, retry after 1 second */ -rte_eal_alarm_set (1000000 , netvsc_hotplug_retry, hv); +rte_eal_alarm_set (1000000 , netvsc_hotplug_retry, hot_ctx); +return ; + +free_hotadd_ctx: +rte_spinlock_lock (&hv->hotadd_lock); +LIST_REMOVE (hot_ctx, list); +rte_spinlock_unlock (&hv->hotadd_lock); + +rte_free (hot_ctx); } static void
@@ -637,7 +654,8 @@ netvsc_hotadd_callback(const char *device_name, enum rte_dev_event_type type, void *arg) {struct hn_data *hv = arg; -struct rte_devargs *d = &hv->devargs; +struct hv_hotadd_context *hot_ctx; +struct rte_devargs *d;int ret; PMD_DRV_LOG(INFO, "Device notification type=%d device_name=%s",
@@ -649,26 +667,42 @@ netvsc_hotadd_callback(const char *device_name, enum rte_dev_event_type type,if (hv->vf_ctx.vf_state > vf_removed)break ; + hot_ctx =rte_zmalloc ("NETVSC-HOTADD" ,sizeof (*hot_ctx), +rte_mem_page_size ()); + +if (!hot_ctx) { +PMD_DRV_LOG (ERR ,"Failed to allocate hotadd context" ); +return ; + } + + hot_ctx->hv = hv; + d = &hot_ctx->da; + ret =rte_devargs_parse (d, device_name);if (ret) {PMD_DRV_LOG (ERR ,"devargs parsing failed ret=%d" , ret); -return ; + goto free_ctx; }if (!strcmp (d->bus->name,"pci" )) {/* Start the process of figuring out if this * PCI device is a VF device */ - hv->eal_hot_plug_retry =0 ; -rte_eal_alarm_set (1000000 , netvsc_hotplug_retry, hv); +rte_spinlock_lock (&hv->hotadd_lock); +LIST_INSERT_HEAD (&hv->hotadd_list, hot_ctx, list); +rte_spinlock_unlock (&hv->hotadd_lock); +rte_eal_alarm_set (1000000 , netvsc_hotplug_retry, hot_ctx); +return ; }/* We will switch to VF on RDNIS configure message * sent from VSP */ - +free_ctx: +rte_free (hot_ctx);break ; +default :break ; }
@@ -1003,12 +1037,20 @@ hn_dev_close(struct rte_eth_dev *dev) {int ret;struct hn_data *hv = dev->data->dev_private; +struct hv_hotadd_context *hot_ctx;PMD_INIT_FUNC_TRACE ();if (rte_eal_process_type () !=RTE_PROC_PRIMARY )return 0 ; -rte_eal_alarm_cancel (netvsc_hotplug_retry, &hv->devargs); +rte_spinlock_lock (&hv->hotadd_lock); +while (!LIST_EMPTY (&hv->hotadd_list)) { + hot_ctx =LIST_FIRST (&hv->hotadd_list); +rte_eal_alarm_cancel (netvsc_hotplug_retry, hot_ctx); +LIST_REMOVE (hot_ctx, list); +rte_free (hot_ctx); + } +rte_spinlock_unlock (&hv->hotadd_lock); ret =hn_vf_close (dev);hn_dev_free_queues (dev);
@@ -1097,6 +1139,9 @@ eth_hn_dev_init(struct rte_eth_dev *eth_dev)PMD_INIT_FUNC_TRACE (); +rte_spinlock_init (&hv->hotadd_lock); +LIST_INIT (&hv->hotadd_list); + vmbus = container_of(device, struct rte_vmbus_device, device); eth_dev->dev_ops = &hn_eth_dev_ops; eth_dev->rx_queue_count = hn_dev_rx_queue_count;
@@ -1221,6 +1266,9 @@ eth_hn_dev_uninit(struct rte_eth_dev *eth_dev) ret_stop =hn_dev_stop (eth_dev);hn_dev_close (eth_dev); +free (hv->vf_devargs); + hv->vf_devargs =NULL ; +hn_detach (hv);hn_chim_uninit (eth_dev);rte_vmbus_chan_close (hv->primary->chan);
drivers/net/netvsc/hn_var.h +10 -2
@@ -126,6 +126,13 @@ struct hn_vf_ctx {enum vf_device_state vf_state; }; +struct hv_hotadd_context { +LIST_ENTRY (hv_hotadd_context) list; +struct hn_data *hv; +struct rte_devargs da; +int eal_hot_plug_retry; +}; +struct hn_data {struct rte_vmbus_device *vmbus;struct hn_rx_queue *primary;
@@ -175,8 +182,9 @@ struct hn_data {struct vmbus_channel *channels[HN_MAX_CHANNELS ]; -struct rte_devargs devargs; -int eal_hot_plug_retry; +rte_spinlock_t hotadd_lock; + LIST_HEAD(hotadd_list, hv_hotadd_context) hotadd_list; +char *vf_devargs; }; static inline struct vmbus_channel *
drivers/net/netvsc/hn_vf.c +4 -0
@@ -129,6 +129,10 @@ static void hn_remove_delayed(void *args)PMD_DRV_LOG (ERR ,"rte_eth_dev_stop failed port_id=%u ret=%d" , port_id, ret); +/* Record the device parameters for possible hotplug events */ +if (dev->devargs && dev->devargs->args) + hv->vf_devargs =strdup (dev->devargs->args); + ret =rte_eth_dev_close (port_id);if (ret) PMD_DRV_LOG(ERR, "rte_eth_dev_close failed port_id=%u ret=%d",
Signature · 1 line
2.32.0
Ferruh Yigit
AppliedQuoted 8 lines · On 3/24/2022 5:46 PM, [email protected] wrote:
From: Long Li <[email protected]>
This patch fixes two issues with hot removing/adding a VF PCI device:
1. The original device argument is lost when it's hot added
2. If there are multiple VFs hot adding at the same time, some of the VFs may not get added successfully because only one single VF status is stored in the netvsc.
Quoted 7 lines
Fix these by storing the original device arguments and maintain a list of hot add contexts to deal with multiple VF devices.
Fixes a2a23a794b ("net/netvsc: support VF device hot add/remove")Signed-off-by Long Li <[email protected]>
Applied to dpdk-next-net/main, thanks.