Skip to contentSkip to conversation

extcon: ptn5150: add queue work sync before driver release

PATCH Applied Li Jun 3 participants 4 messages Apr 19, 2022 – Apr 26, 2022

Subsystems (2)
lore
Share & tools
lore

Li Jun

author
#0 lore raw

PATCH v3 1/2 extcon: ptn5150: add queue work sync before driver release

Add device managed action to sync pending queue work, otherwise the queued work may run after the work is destroyed.

Fixes 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver")

---
change for v3:
- Add Fixes and R-b tag.

 drivers/extcon/extcon-ptn5150.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/extcon/extcon-ptn5150.c +11 -0
index 5b9a3cf8df26..2a7874108df8 100644
@@ -194,6 +194,13 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
 	return 0;
 }
 
+static void ptn5150_work_sync_and_put(void *data)
+{
+	struct ptn5150_info *info = data;
+
+	cancel_work_sync(&info->irq_work);
+}
+
 static int ptn5150_i2c_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
@@ -284,6 +291,10 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
 	if (ret)
 		return -EINVAL;
 
+	ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info);
+	if (ret)
+		return ret;
+
 	/*
 	 * Update current extcon state if for example OTG connection was there
 	 * before the probe
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v3 2/2 extcon: ptn5150: Add usb role class support

Some usb controller drivers may not support extcon but use usb role class as it's the preferred approach, so to support usb dual role switch with usb role class, add usb role class consumer support.

---
Change for v3:
- Use 'depends on' intead of select USB_ROLE_SWITCH in Kconfig.

change for v2:
- Add one patch to sync queue work before driver remove.
- improve git commit log
- use a variable of usb_role to set target role in ptn5150_check_state() to simplify code.
- use dev_err_probe for usb_role_switch_get() return value.

 drivers/extcon/Kconfig          |  1 +
 drivers/extcon/extcon-ptn5150.c | 25 +++++++++++++++++++++++++
 2 files changed, 26 insertions(+)
drivers/extcon/Kconfig +1 -0
index 88a8b3d7d78a..dca7cecb37e3 100644
@@ -131,6 +131,7 @@ config EXTCON_PALMAS
 config EXTCON_PTN5150
 	tristate "NXP PTN5150 CC LOGIC USB EXTCON support"
 	depends on I2C && (GPIOLIB || COMPILE_TEST)
+	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
 	select REGMAP_I2C
 	help
 	  Say Y here to enable support for USB peripheral and USB host
drivers/extcon/extcon-ptn5150.c +25 -0
index 2a7874108df8..017a07197f38 100644
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/extcon-provider.h>
 #include <linux/gpio/consumer.h>
+#include <linux/usb/role.h>
 
 /* PTN5150 registers */
 #define PTN5150_REG_DEVICE_ID			0x01
@@ -52,6 +53,7 @@ struct ptn5150_info {
 	int irq;
 	struct work_struct irq_work;
 	struct mutex mutex;
+	struct usb_role_switch *role_sw;
 };
 
 /* List of detectable cables */
@@ -70,6 +72,7 @@ static const struct regmap_config ptn5150_regmap_config = {
 static void ptn5150_check_state(struct ptn5150_info *info)
 {
 	unsigned int port_status, reg_data, vbus;
+	enum usb_role usb_role = USB_ROLE_NONE;
 	int ret;
 
 	ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, &reg_data);
@@ -85,6 +88,7 @@ static void ptn5150_check_state(struct ptn5150_info *info)
 		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
 		gpiod_set_value_cansleep(info->vbus_gpiod, 0);
 		extcon_set_state_sync(info->edev, EXTCON_USB, true);
+		usb_role = USB_ROLE_DEVICE;
 		break;
 	case PTN5150_UFP_ATTACHED:
 		extcon_set_state_sync(info->edev, EXTCON_USB, false);
@@ -95,10 +99,18 @@ static void ptn5150_check_state(struct ptn5150_info *info)
 			gpiod_set_value_cansleep(info->vbus_gpiod, 1);
 
 		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
+		usb_role = USB_ROLE_HOST;
 		break;
 	default:
 		break;
 	}
+
+	if (usb_role) {
+		ret = usb_role_switch_set_role(info->role_sw, usb_role);
+		if (ret)
+			dev_err(info->dev, "failed to set %s role: %d\n",
+				usb_role_string(usb_role), ret);
+	}
 }
 
 static void ptn5150_irq_work(struct work_struct *work)
@@ -133,6 +145,13 @@ static void ptn5150_irq_work(struct work_struct *work)
 			extcon_set_state_sync(info->edev,
 					EXTCON_USB, false);
 			gpiod_set_value_cansleep(info->vbus_gpiod, 0);
+
+			ret = usb_role_switch_set_role(info->role_sw,
+						       USB_ROLE_NONE);
+			if (ret)
+				dev_err(info->dev,
+					"failed to set none role: %d\n",
+					ret);
 		}
 	}
 
@@ -199,6 +218,7 @@ static void ptn5150_work_sync_and_put(void *data)
 	struct ptn5150_info *info = data;
 
 	cancel_work_sync(&info->irq_work);
+	usb_role_switch_put(info->role_sw);
 }
 
 static int ptn5150_i2c_probe(struct i2c_client *i2c)
@@ -291,6 +311,11 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
 	if (ret)
 		return -EINVAL;
 
+	info->role_sw = usb_role_switch_get(info->dev);
+	if (IS_ERR(info->role_sw))
+		return dev_err_probe(info->dev, PTR_ERR(info->role_sw),
+				     "failed to get role switch\n");
+
 	ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info);
 	if (ret)
 		return ret;
Signature · 1 line
2.25.1
Reviewed-by on v3 2/2
#2 lore raw

Re: [PATCH v3 2/2] extcon: ptn5150: Add usb role class support

Quoted 6 lines · Li Jun

Some usb controller drivers may not support extcon but use usb role class as it's the preferred approach, so to support usb dual role switch with usb role class, add usb role class consumer support.

Best regards,
Krzysztof

Applied
#3 lore raw
In reply to Li Jun
Quoted 32 lines · Li Jun

Add device managed action to sync pending queue work, otherwise the queued work may run after the work is destroyed.

Fixes 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver")

---
change for v3:
- Add Fixes and R-b tag.

  drivers/extcon/extcon-ptn5150.c | 11 +++++++++++
  1 file changed, 11 insertions(+)
drivers/extcon/extcon-ptn5150.c +7 -0
index 5b9a3cf8df26..2a7874108df8 100644
@@ -194,6 +194,13 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
  	return 0;
  }
 
+static void ptn5150_work_sync_and_put(void *data)
+{
+	struct ptn5150_info *info = data;
+
+	cancel_work_sync(&info->irq_work);
+}
+
  static int ptn5150_i2c_probe(struct i2c_client *i2c)
  {
  	struct device *dev = &i2c->dev;

drivers/extcon/extcon-ptn5150.c static int ptn5150_i2c_probe(struct i2c_client *i2c) · line 300

Quoted 10 lines
drivers/extcon/extcon-ptn5150.c +4 -0
@@ -284,6 +291,10 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
  	if (ret)
  		return -EINVAL;
 
+	ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info);
+	if (ret)
+		return ret;
+
  	/*
  	 * Update current extcon state if for example OTG connection was there
  	 * before the probe

Applied them. Thanks.

Signature · 3 lines
Best Regards,
Samsung Electronics
Chanwoo Choi