nvme-pci: allowed to modify IRQ affinity in latency sensitive scenarios
RFC PATCH 1/1 nvme-pci: allowed to modify IRQ affinity in latency sensitive scenarios
From: Chunguang Xu <[email protected]>
In most cases, setting the affinity through managed IRQ is a better choice. But in some scenarios that use isolcpus, such as DPDK, because managed IRQ does not distinguish between housekeeping CPU and isolated CPU when selecting CPU, this will cause IO interrupts triggered by housekeeping CPU to be routed to isolated CPU, which will affect the tasks running on isolated CPU. commit 11ea68f553e2 ("genirq, sched/isolation: Isolate from handling managed interrupts") tries to fix this in a best effort way. However, in a real production environment, latency-sensitive business needs more of a deterministic result. So, similar to the mpt3sas driver, we might can add a module parameter smp_affinity_enable to the Nvme driver.
By default, we use managed IRQ. When smp_affinity_enable is set to 0, we alloc normal interrupts for Nvme. Therefore, users can modify the interrupt affinity according to their actual needs when the managed IRQ cannot satisfy them. This method is not a good choice in most scenarios. But for users who clear what they are doing, it may be better than not being able to do anything.
--- drivers/nvme/host/pci.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-)
drivers/nvme/host/pci.c +27 -3
@@ -74,6 +74,10 @@ static unsigned int io_queue_depth = 1024;module_param_cb (io_queue_depth, &io_queue_depth_ops, &io_queue_depth,0644 );MODULE_PARM_DESC (io_queue_depth,"set io queue depth, should >= 2 and < 4096" ); +static unsigned int smp_affinity_enable =1 ; +module_param (smp_affinity_enable, uint,0644 ); +MODULE_PARM_DESC (smp_affinity_enable,"SMP affinity feature enable/disable Default: enable(1)" ); +static int io_queue_count_set (const char *val,const struct kernel_param *kp) {unsigned int n;
@@ -471,7 +475,7 @@ static int nvme_pci_map_queues(struct blk_mq_tag_set *set)* affinity), so use the regular blk-mq cpu mapping */ map->queue_offset = qoff; -if (i !=HCTX_TYPE_POLL && offset) +if (i !=HCTX_TYPE_POLL && offset && smp_affinity_enable)blk_mq_pci_map_queues (map,to_pci_dev (dev->dev), offset);else blk_mq_map_queues (map);
@@ -2293,7 +2297,11 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues) .calc_sets = nvme_calc_irq_sets, .priv = dev, }; +struct irq_affinity *p_affd = &affd;unsigned int irq_queues, poll_queues; +unsigned int flags =PCI_IRQ_ALL_TYPES ; +unsigned int affvecs; +int nr_irqs;/* * Poll queues don't need interrupts, but we need at least one I/O queue
@@ -2317,8 +2325,24 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues) irq_queues =1 ;if (!(dev->ctrl.quirks &NVME_QUIRK_SINGLE_VECTOR )) irq_queues += (nr_io_queues - poll_queues); -return pci_alloc_irq_vectors_affinity (pdev,1 , irq_queues, -PCI_IRQ_ALL_TYPES |PCI_IRQ_AFFINITY , &affd); + +if (smp_affinity_enable) + flags |=PCI_IRQ_AFFINITY ; +else + p_affd =NULL ; + + nr_irqs =pci_alloc_irq_vectors_affinity (pdev,1 , irq_queues, flags, p_affd); + +if (nr_irqs >0 && !smp_affinity_enable) { +if (nr_irqs > affd.pre_vectors) + affvecs = nr_irqs - affd.pre_vectors; +else + affvecs =0 ; + +nvme_calc_irq_sets (&affd, affvecs); + } + +return nr_irqs; }static void nvme_disable_io_queues (struct nvme_dev *dev)
Signature · 1 line
2.30.0
Christoph Hellwig
maintainerQuoted 13 lines · brookxu.cn
From: Chunguang Xu <[email protected]>
In most cases, setting the affinity through managed IRQ is a better choice. But in some scenarios that use isolcpus, such as DPDK, because managed IRQ does not distinguish between housekeeping CPU and isolated CPU when selecting CPU, this will cause IO interrupts triggered by housekeeping CPU to be routed to isolated CPU, which will affect the tasks running on isolated CPU. commit
11ea68f553e2("genirq, sched/isolation: Isolate from handling managed interrupts") tries to fix this in a best effort way. However, in a real production environment, latency-sensitive business needs more of a deterministic result. So, similar to the mpt3sas driver, we might can add a module parametersmp_affinity_enableto the Nvme driver.
This kind of boilerplate code in random drivers is not sustainable.
I really think we need to handle this whole housekeeping CPU case in common code. That is designed CPUs as housekeeping vs non-housekeeping and let the generic affinity assignment code deal with it and solve it for all drivers using the proper affinity masks instead of having random slighty overrides in all drivers anyone ever wants to use in such a system.