Skip to contentSkip to conversation

FAILED: patch "[PATCH] scsi: qla2xxx: Fix losing target when it reappears during" failed to apply to 5.10-stable tree

PATCH [email protected] 1 participant 1 message Aug 14, 2022

Subsystems (3)
Stable branch SCSI QLogic QLA2XXX FC-SCSI driver
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 118b0c863c8f5629cc5271fc24d72d926e0715d9 Mon Sep 17 00:00:00 2001
From: Arun Easi <[email protected]>
Date: Wed, 15 Jun 2022 22:35:04 -0700
Subject: [PATCH] scsi: qla2xxx: Fix losing target when it reappears during
delete

FC target disappeared during port perturbation tests due to a race that tramples target state. Fix the issue by adding state checks before proceeding.

Link https://lore.kernel.org/r/[email protected] open here
Fixes 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target")
Cc [email protected]
Signed-off-by Arun Easi <[email protected]>
Signed-off-by Nilesh Javali <[email protected]>
Signed-off-by Martin K. Petersen <[email protected]>
drivers/scsi/qla2xxx/qla_attr.c +17 -7
index 8b87fefda423..feca9e44b21c 100644
@@ -2714,17 +2714,24 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
 	if (!fcport)
 		return;
 
-	/* Now that the rport has been deleted, set the fcport state to
-	   FCS_DEVICE_DEAD */
-	qla2x00_set_fcport_state(fcport, FCS_DEVICE_DEAD);
+
+	/*
+	 * Now that the rport has been deleted, set the fcport state to
+	 * FCS_DEVICE_DEAD, if the fcport is still lost.
+	 */
+	if (fcport->scan_state != QLA_FCPORT_FOUND)
+		qla2x00_set_fcport_state(fcport, FCS_DEVICE_DEAD);
 
 	/*
 	 * Transport has effectively 'deleted' the rport, clear
 	 * all local references.
 	 */
 	spin_lock_irqsave(host->host_lock, flags);
-	fcport->rport = fcport->drport = NULL;
-	*((fc_port_t **)rport->dd_data) = NULL;
+	/* Confirm port has not reappeared before clearing pointers. */
+	if (rport->port_state != FC_PORTSTATE_ONLINE) {
+		fcport->rport = fcport->drport = NULL;
+		*((fc_port_t **)rport->dd_data) = NULL;
+	}
 	spin_unlock_irqrestore(host->host_lock, flags);
 
 	if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))

@@ -2757,9 +2764,12 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 	/*
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
+	 *
+	 * Attempt to cleanup only lost devices.
 	 */
 	if (fcport->loop_id != FC_NO_LOOP_ID) {
-		if (IS_FWI2_CAPABLE(fcport->vha->hw)) {
+		if (IS_FWI2_CAPABLE(fcport->vha->hw) &&
+		    fcport->scan_state != QLA_FCPORT_FOUND) {
 			if (fcport->loop_id != FC_NO_LOOP_ID)
 				fcport->logout_on_delete = 1;
 

@@ -2769,7 +2779,7 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 				       __LINE__);
 				qlt_schedule_sess_for_deletion(fcport);
 			}
-		} else {
+		} else if (!IS_FWI2_CAPABLE(fcport->vha->hw)) {
 			qla2x00_port_logout(fcport->vha, fcport);
 		}
 	}