FAILED: patch "[PATCH] net: dsa: mv88e6060: prevent crash on an unused port" failed to apply to 4.19-stable tree

The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 246bbf2f977ea36aaf41f5d24370fef433250728 Mon Sep 17 00:00:00 2001
From: Sergei Antonov <[email protected]>
Date: Thu, 11 Aug 2022 10:09:39 +0300
Subject: [PATCH] net: dsa: mv88e6060: prevent crash on an unused port

If the port isn't a CPU port nor a user port, 'cpu_dp' is a null pointer and a crash happened on dereferencing it in mv88e6060_setup_port():

[    9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014
...
[    9.942216]  mv88e6060_setup from dsa_register_switch+0x814/0xe84
[    9.948616]  dsa_register_switch from mdio_probe+0x2c/0x54
[    9.954433]  mdio_probe from really_probe.part.0+0x98/0x2a0
[    9.960375]  really_probe.part.0 from driver_probe_device+0x30/0x10c
[    9.967029]  driver_probe_device from __device_attach_driver+0xb8/0x13c
[    9.973946]  __device_attach_driver from bus_for_each_drv+0x90/0xe0
[    9.980509]  bus_for_each_drv from __device_attach+0x110/0x184
[    9.986632]  __device_attach from bus_probe_device+0x8c/0x94
[    9.992577]  bus_probe_device from deferred_probe_work_func+0x78/0xa8
[    9.999311]  deferred_probe_work_func from process_one_work+0x290/0x73c
[   10.006292]  process_one_work from worker_thread+0x30/0x4b8
[   10.012155]  worker_thread from kthread+0xd4/0x10c
[   10.017238]  kthread from ret_from_fork+0x14/0x3c

index a4c6eb9a52d0..83dca9179aa0 100644
@@ -118,6 +118,9 @@ static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
 	int addr = REG_PORT(p);
 	int ret;
 
+	if (dsa_is_unused_port(priv->ds, p))
+		return 0;
+
 	/* Do not force flow control, disable Ingress and Egress
 	 * Header tagging, disable VLAN tunneling, and set the port
 	 * state to Forwarding.  Additionally, if this is the CPU