Skip to contentSkip to conversation

gpiolib: add NULL to the end of arry of_find_gpio_quirks[]

PATCH In review [email protected] 2 participants 3 messages Sep 21, 2022 – Sep 22, 2022 GPIO

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 gpiolib: add NULL to the end of arry of_find_gpio_quirks[]

From: Haibo Chen <[email protected]>

After commit a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()"), it add an arry of_find_gpio_quirks[], but in the for loop, it use *q to judge whether it is out of the arry range. Unfortunately, in the arry, forget to add NULL in the end, which has the risk of out of arry access, here is the dump on i.MX8MM-evk board:

[    0.773631] Internal error: SP/PC alignment exception: 000000008a000000 [#1] PREEMPT SMP
[    0.781112] Modules linked in:
[    0.784173] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc6-next-20220919 #4
[    0.791609] Hardware name: FSL i.MX8MM EVK board (DT)
[    0.796686] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.803682] pc : 0x61722d6f697067
[    0.807009] lr : of_find_gpio+0x130/0x170
[    0.811035] sp : ffff80000a44b9d0
[    0.814357] x29: ffff80000a44b9d0 x28: 0000000000000000 x27: ffff0000002ece80
[    0.821534] x26: ffff000003948a00 x25: 0000000000000001 x24: ffff8000098285e8
[    0.828707] x23: ffff800009175f48 x22: ffff80000a44bac0 x21: 0000000000000000
[    0.835882] x20: ffff000000236810 x19: ffff80000978c588 x18: 0000000000000000
[    0.843057] x17: 0000000000009800 x16: 0000000000004650 x15: 0000000000000001
[    0.850232] x14: 0000000000000000 x13: 0000000000000018 x12: 0101010101010101
[    0.857407] x11: ff7f7f7f7f7f7f7f x10: fffffffffff8e088 x9 : 0000000000000003
[    0.864582] x8 : 0101010101010101 x7 : ffff80000971a7b0 x6 : 141047145c43003a
[    0.871757] x5 : 6e61722d6f697067 x4 : fffffffffffffffe x3 : ffff80000a44ba24
[    0.878934] x2 : 0000000000000000 x1 : ffff80000978c588 x0 : ffff00007dbf7d00
[    0.886110] Call trace:
[    0.888560]  0x61722d6f697067
[    0.891534]  gpiod_get_index+0x124/0x3c4
[    0.895470]  devm_gpiod_get_index+0x2c/0xe4
[    0.899670]  devm_gpiod_get_optional+0x18/0x30
[    0.904132]  uart_get_rs485_mode+0x100/0x17c
[    0.908420]  imx_uart_probe+0x3f0/0x800
[    0.912272]  platform_probe+0x68/0xe0
[    0.915945]  really_probe+0xbc/0x2dc
[    0.919532]  __driver_probe_device+0x78/0xe0
[    0.923820]  driver_probe_device+0xd8/0x160
[    0.928020]  __driver_attach+0x80/0x190
[    0.931870]  bus_for_each_dev+0x70/0xd0
[    0.935720]  driver_attach+0x24/0x30
[    0.939307]  bus_add_driver+0x150/0x200
[    0.943159]  driver_register+0x78/0x130
[    0.947007]  __platform_driver_register+0x28/0x34
[    0.951732]  imx_uart_init+0x3c/0x64
[    0.955320]  do_one_initcall+0x50/0x1c0
[    0.959170]  kernel_init_freeable+0x218/0x284
[    0.963545]  kernel_init+0x24/0x12c
[    0.967045]  ret_from_fork+0x10/0x20
[    0.970640] Code: bad PC value
[    0.973700] ---[ end trace 0000000000000000 ]---
[    0.978399] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    0.986035] SMP: stopping secondary CPUs
[    0.989978] Kernel Offset: disabled
[    0.993472] CPU features: 0x00000,00800084,0000421b
[    0.998372] Memory Limit: none
[    1.001437] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fixes a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()")
---
 drivers/gpio/gpiolib-of.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpio/gpiolib-of.c +1 -0
index 95be5f0d2623..1b60cd04883f 100644
@@ -498,6 +498,7 @@ static const of_find_gpio_quirk of_find_gpio_quirks[] = {
 	of_find_regulator_gpio,
 	of_find_arizona_gpio,
 	of_find_usb_gpio,
+	NULL,
 };
 
 struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
Signature · 1 line
2.34.1
#1 lore raw
Quoted 10 lines · On Wed, Sep 21, 2022 at 10:02 AM <[email protected]> wrote:

From: Haibo Chen <[email protected]>

After commit a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()"), it add an arry of_find_gpio_quirks[], but in the for loop, it use *q to judge whether it is out of the arry range. Unfortunately, in the arry, forget to add NULL in the end, which has the risk of out of arry access, here is the dump on i.MX8MM-evk board:

This was already fixed by Michael Walle.

Bart

author
#2 lore raw
Quoted 13 lines

-----Original Message-----
From: Bartosz Golaszewski <[email protected]>
Sent: 2022年9月22日 16:23
To: Bough Chen <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; Aisheng Dong <[email protected]>; dl-linux-imx <[email protected]>
Subject: Re: [PATCH] gpiolib: add NULL to the end of arry of_find_gpio_quirks[]

Quoted 3 lines · On Wed, Sep 21, 2022 at 10:02 AM <[email protected]> wrote:

From: Haibo Chen <[email protected]>

Quoted 8 lines
Quoted 6 lines

After commit a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()"), it add an arry of_find_gpio_quirks[], but in the for loop, it use *q to judge whether it is out of the arry range. Unfortunately, in the arry, forget to add NULL in the end, which has the risk of out of arry access, here is the dump on i.MX8MM-evk board:

This was already fixed by Michael Walle.

I just find the fix patch already in next-20220921. Thanks for the reminder.

Best Regards
Haibo Chen

Quoted 2 lines

Bart