Skip to contentSkip to conversation

Matroxfb & Motorola PPC & ...

DISCUSSION Geert Uytterhoeven 1 participant 1 message Dec 23, 1998 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi Petr,

Quoted 4 lines

after tweaking around I've found that add _ISA_MEM_BASE to value
contained in pcidev->base_address to get virtual address is RightWay(TM). It is in complete contradict to everything what is written everywhere :-( Dear ia32, come back to me...

You're talking about a base_address in PCI I/O space, not PCI memory space? Yes, that's correct. On PReP, I/O space starts at 0x80000000. Quite normal ;-)

Quoted 6 lines

And... I compiled both VGA Console and Framebuffer Console into one
driver... Believe or not, it works - almost:

include/asm-ppc/vga.h
scr_readw(ushort* x) { return ld_le16(x); }

Quoted 6 lines

include/linux/vt_buffer.h
#define scr_readw(x) ((ushort*)(addr))

So it causes that if you have compiled in both VGA and FBCon, fbcon does not work - you'll see small balls (character code 7) with random color background (determined from character code)...

Aha, so scr_readw() is redefined. I already heard about problems with kernels that have both vgacon and fbcon on PPC. As I don't have a PReP box, I was unaware of the problem.

Quoted 2 lines

Maybe that some conditionals or warning should be added to Config.in, should not?

Not a good solution: it should be possible to have a unified kernel that works on PReP, PowerMac and CHRP, and thus it must contain both vgacon and fbcon.

Quoted 1 line

P.S.: Without vgacon (with fbcon alone or together with early boot (BootX only)

BootX only console? Why do you need that? BootX is for booting Linux/PPC on PowerMac while running MacOS. I'd say: disable it in your config.

Quoted 2 lines

console), it looks like that main console is serial - it is not what I want :-( What is proper way to boot PPC with framebuffer?

Is your Millennium correctly initialized to VGA text mode by the PReP Firmware? If not, it's quite normal that it doesn't work that well.

Things will also go wrong on PReP if you disable vgacon, since conswitchp is no longer initialized. You should add

    #ifdef CONFIG_DUMMY_CONSOLE
        conswitchp = &dummy_con;
    #endif

to prep_setup_arch() in arch/ppc/kernel/prep_setup.c, as is done for CHRP in chrp_setup.c. Later the frame buffer console will take over the screen.

Greetings,

Geert

--
Geert Uytterhoeven [email protected]
Wavelets, Linux/{m68k~Amiga,PPC~CHRP} http://www.cs.kuleuven.ac.be/~geert/
Department of Computer Science -- Katholieke Universiteit Leuven -- Belgium

[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to [email protected] ]]