Linux 5.10.167

index 484c6b2dd264..c623632c1cda 100644
@@ -1370,6 +1370,10 @@ int blkcg_activate_policy(struct request_queue *q,
 		list_for_each_entry_reverse(blkg, &q->blkg_list, q_node)
 			pol->pd_init_fn(blkg->pd[pol->plid]);
 
+	if (pol->pd_online_fn)
+		list_for_each_entry_reverse(blkg, &q->blkg_list, q_node)
+			pol->pd_online_fn(blkg->pd[pol->plid]);
+
 	__set_bit(pol->plid, q->blkcg_pols);
 	ret = 0;
 

index e5dd87ddc6b3..59781e765e0e 100644
@@ -536,10 +536,27 @@ static void wait_for_freeze(void)
 	/* No delay is needed if we are in guest */
 	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 		return;
+	/*
+	 * Modern (>=Nehalem) Intel systems use ACPI via intel_idle,
+	 * not this code.  Assume that any Intel systems using this
+	 * are ancient and may need the dummy wait.  This also assumes
+	 * that the motivating chipset issue was Intel-only.
+	 */
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+		return;
 #endif
-	/* Dummy wait op - must do something useless after P_LVL2 read
-	   because chipsets cannot guarantee that STPCLK# signal
-	   gets asserted in time to freeze execution properly. */
+	/*
+	 * Dummy wait op - must do something useless after P_LVL2 read
+	 * because chipsets cannot guarantee that STPCLK# signal gets
+	 * asserted in time to freeze execution properly
+	 *
+	 * This workaround has been in place since the original ACPI
+	 * implementation was merged, circa 2002.
+	 *
+	 * If a profile is pointing to this instruction, please first
+	 * consider moving your system to a more modern idle
+	 * mechanism.
+	 */
 	inl(acpi_gbl_FADT.xpm_timer_block.address);
 }
 

index 2283dcd8bf91..6514db824473 100644
@@ -1363,10 +1363,12 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
 		sdma_config_ownership(sdmac, false, true, false);
 
 	if (sdma_load_context(sdmac))
-		goto err_desc_out;
+		goto err_bd_out;
 
 	return desc;
 
+err_bd_out:
+	sdma_free_bd(desc);
 err_desc_out:
 	kfree(desc);
 err_out:

index a9e074769881..ab4f51716645 100644
@@ -1072,6 +1072,9 @@ static int bpf_send_signal_common(u32 sig, enum pid_type type)
 		return -EPERM;
 	if (unlikely(!nmi_uaccess_okay()))
 		return -EPERM;
+	/* Task should not be pid=1 to avoid kernel panic. */
+	if (unlikely(is_global_init(current)))
+		return -EPERM;
 
 	if (irqs_disabled()) {
 		/* Do an early check on signal validity. Otherwise,

index 954b29605c94..eb111504afc6 100644
@@ -4307,6 +4307,19 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
 	struct hci_ev_sync_conn_complete *ev = (void *) skb->data;
 	struct hci_conn *conn;
 
+	switch (ev->link_type) {
+	case SCO_LINK:
+	case ESCO_LINK:
+		break;
+	default:
+		/* As per Core 5.3 Vol 4 Part E 7.7.35 (p.2219), Link_Type
+		 * for HCI_Synchronous_Connection_Complete is limited to
+		 * either SCO or eSCO
+		 */
+		bt_dev_err(hdev, "Ignoring connect complete event for invalid link type");
+		return;
+	}
+
 	BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
 
 	hci_dev_lock(hdev);

index 2b12e0730b85..668a9d0fbbc6 100644
@@ -3688,7 +3688,7 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
 
 	skb_shinfo(skb)->frag_list = NULL;
 
-	do {
+	while (list_skb) {
 		nskb = list_skb;
 		list_skb = list_skb->next;
 

@@ -3732,8 +3732,7 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
 		if (skb_needs_linearize(nskb, features) &&
 		    __skb_linearize(nskb))
 			goto err_linearize;
-
-	} while (list_skb);
+	}
 
 	skb->truesize = skb->truesize - delta_truesize;
 	skb->data_len = skb->data_len - delta_len;