FAILED: patch "[PATCH] drm/i915/dp_mst: Fix payload removal during output disabling" failed to apply to 6.1-stable tree
[email protected]
maintainerThe patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x eb50912ec931913e70640cecf75cb993fd26995f
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '[email protected]' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
eb50912ec931 ("drm/i915/dp_mst: Fix payload removal during output disabling") e761cc20946a ("drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload()") 9b2d019144a0 ("drm/display/dp_mst: Correct the kref of port.")8c7d980da9ba ("drm/nouveau/disp: move DP MST payload config method") 8bb30c882334 ("drm/nouveau/disp: add method to trigger DP link retrain") 016dacb60e6d ("drm/nouveau/kms: pass event mask to hpd handler")d62f8e982cb8 ("drm/nouveau/kms: switch hpd_lock from mutex to spinlock") a62b74939063 ("drm/nouveau/disp: add method to control DPAUX pad power") 813443721331 ("drm/nouveau/disp: move DP link config into acquire") a9f5d7721923 ("drm/nouveau/disp: move HDA ELD method")f530bc60a30b ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods") 9793083f1dd9 ("drm/nouveau/disp: move LVDS protocol information into acquire") ea6143a86c67 ("drm/nouveau/disp: move and extend the role of outp acquire/release methods")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From eb50912ec931913e70640cecf75cb993fd26995f Mon Sep 17 00:00:00 2001
From: Imre Deak <[email protected]>
Date: Mon, 6 Feb 2023 13:48:56 +0200
Subject: [PATCH] drm/i915/dp_mst: Fix payload removal during output disabling
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Use the correct old/new topology and payload states in intel_mst_disable_dp(). So far drm_atomic_get_mst_topology_state() it used returned either the old state, in case the state was added already earlier during the atomic check phase or otherwise the new state (but the latter could fail, which can't be handled in the enable/disable hooks). After the first patch in the patchset, the state should always get added already during the check phase, so here we can get the old/new states without a failure.
drm_dp_remove_payload() should use time_slots from the old payload state and vc_start_slot in the new one. It should update the new payload states to reflect the sink's current payload table after the payload is removed. Pass the new topology state and the old and new payload states accordingly.
This also fixes a problem where the payload allocations for multiple MST streams on the same link got inconsistent after a few commits, as during payload removal the old instead of the new payload state got updated, so the subsequent enabling sequence and commits used a stale payload state.
v2: Constify the old payload state pointer. (Ville)
drivers/gpu/drm/i915/display/intel_dp_mst.c +10 -6
@@ -524,10 +524,14 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,struct intel_dp *intel_dp = &dig_port->dp;struct intel_connector *connector =to_intel_connector (old_conn_state->connector); -struct drm_dp_mst_topology_state *mst_state = -drm_atomic_get_mst_topology_state (&state->base, &intel_dp->mst_mgr); -struct drm_dp_mst_atomic_payload *payload = -drm_atomic_get_mst_payload_state (mst_state, connector->port); +struct drm_dp_mst_topology_state *old_mst_state = +drm_atomic_get_old_mst_topology_state (&state->base, &intel_dp->mst_mgr); +struct drm_dp_mst_topology_state *new_mst_state = +drm_atomic_get_new_mst_topology_state (&state->base, &intel_dp->mst_mgr); +const struct drm_dp_mst_atomic_payload *old_payload = +drm_atomic_get_mst_payload_state (old_mst_state, connector->port); +struct drm_dp_mst_atomic_payload *new_payload = +drm_atomic_get_mst_payload_state (new_mst_state, connector->port);struct drm_i915_private *i915 =to_i915 (connector->base.dev); drm_dbg_kms(&i915->drm, "active links %d\n",
@@ -535,8 +539,8 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,intel_hdcp_disable (intel_mst->connector); -drm_dp_remove_payload (&intel_dp->mst_mgr, mst_state, - payload, payload); +drm_dp_remove_payload (&intel_dp->mst_mgr, new_mst_state, + old_payload, new_payload);intel_audio_codec_disable (encoder, old_crtc_state, old_conn_state); }