FAILED: patch "[PATCH] drm/amd/display: Remove OTG DIV register write for Virtual" failed to apply to 6.2-stable tree

The patch below does not apply to the 6.2-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.2.y
git checkout FETCH_HEAD
git cherry-pick -x 709671ffb15dcd1b4f6afe2a9d8c67c7c4ead4a1
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '[email protected]' --subject-prefix 'PATCH 6.2.y' HEAD^..

Possible dependencies:

709671ffb15d ("drm/amd/display: Remove OTG DIV register write for Virtual signals.") 3b214bb7185d ("drm/amd/display: fix k1 k2 divider programming for phantom streams")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 709671ffb15dcd1b4f6afe2a9d8c67c7c4ead4a1 Mon Sep 17 00:00:00 2001
From: Saaem Rizvi <[email protected]>
Date: Mon, 27 Feb 2023 18:55:07 -0500
Subject: [PATCH] drm/amd/display: Remove OTG DIV register write for Virtual
signals.

[WHY]
Hot plugging and then hot unplugging leads to k1 and k2 values to change, as signal is detected as a virtual signal on hot unplug. Writing these values to OTG_PIXEL_RATE_DIV register might cause primary display to blank (known hw bug).

[HOW]
No longer write k1 and k2 values to register if signal is virtual, we have safe guards in place in the case that k1 and k2 is unassigned so that an unknown value is not written to the register either.

index 16f892125b6f..9d14045cccd6 100644
@@ -1104,7 +1104,7 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign
 			*k2_div = PIXEL_RATE_DIV_BY_2;
 		else
 			*k2_div = PIXEL_RATE_DIV_BY_4;
-	} else if (dc_is_dp_signal(stream->signal) || dc_is_virtual_signal(stream->signal)) {
+	} else if (dc_is_dp_signal(stream->signal)) {
 		if (two_pix_per_container) {
 			*k1_div = PIXEL_RATE_DIV_BY_1;
 			*k2_div = PIXEL_RATE_DIV_BY_2;