Skip to contentSkip to conversation

Make use of media bus pixel codes in adv7175 driver

PATCH RESEND New Christian Gmeiner 1 participant 1 message Oct 5, 2011 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 Make use of media bus pixel codes in adv7175 driver

The ADV7175A/ADV7176A can operate in either 8-bit or 16-bit YCrCb mode.

* 8-Bit YCrCb Mode
This default mode accepts multiplexed YCrCb inputs through the P7-P0 pixel inputs. The inputs follow the sequence Cb0, Y0 Cr0, Y1 Cb1, Y2, etc. The Y, Cb and Cr data are input on a rising clock edge.

* 16-Bit YCrCb Mode
This mode accepts Y inputs through the P7–P0 pixel inputs and multiplexed CrCb inputs through the P15–P8 pixel inputs. The data is loaded on every second rising edge of CLOCK. The inputs follow the sequence Cb0, Y0 Cr0, Y1 Cb1, Y2, etc.

---

drivers/media/video/adv7175.c +62 -0
index d2327db..206078e 100644
@@ -61,6 +61,11 @@ static inline struct adv7175 *to_adv7175(struct v4l2_subdev *sd)
 
 static char *inputs[] = { "pass_through", "play_back", "color_bar" };
 
+static enum v4l2_mbus_pixelcode adv7175_codes[] = {
+	V4L2_MBUS_FMT_UYVY8_2X8,
+	V4L2_MBUS_FMT_UYVY8_1X16,
+};
+
 /* ----------------------------------------------------------------------- */
 
 static inline int adv7175_write(struct v4l2_subdev *sd, u8 reg, u8 value)
@@ -296,6 +301,60 @@ static int adv7175_s_routing(struct v4l2_subdev *sd,
 	return 0;
 }
 
+static int adv7175_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
+				enum v4l2_mbus_pixelcode *code)
+{
+	if (index >= ARRAY_SIZE(adv7175_codes))
+		return -EINVAL;
+
+	*code = adv7175_codes[index];
+	return 0;
+}
+
+static int adv7175_g_fmt(struct v4l2_subdev *sd,
+				struct v4l2_mbus_framefmt *mf)
+{
+	u8 val = adv7175_read(sd, 0x7);
+
+	if ((val & 0x40) == (1 << 6))
+		mf->code = V4L2_MBUS_FMT_UYVY8_1X16;
+	else
+		mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+
+	mf->colorspace  = V4L2_COLORSPACE_SMPTE170M;
+	mf->width       = 0;
+	mf->height      = 0;
+	mf->field       = V4L2_FIELD_ANY;
+
+	return 0;
+}
+
+static int adv7175_s_fmt(struct v4l2_subdev *sd,
+				struct v4l2_mbus_framefmt *mf)
+{
+	u8 val = adv7175_read(sd, 0x7);
+	int ret;
+
+	switch (mf->code) {
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		val &= ~0x40;
+		break;
+
+	case V4L2_MBUS_FMT_UYVY8_1X16:
+		val |= 0x40;
+		break;
+
+	default:
+		v4l2_dbg(1, debug, sd,
+			"illegal v4l2_mbus_framefmt code: %d\n", mf->code);
+		return -EINVAL;
+	}
+
+	ret = adv7175_write(sd, 0x7, val);
+
+	return ret;
+}
+
 static int adv7175_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -324,6 +383,9 @@ static const struct v4l2_subdev_core_ops adv7175_core_ops = {
 static const struct v4l2_subdev_video_ops adv7175_video_ops = {
 	.s_std_output = adv7175_s_std_output,
 	.s_routing = adv7175_s_routing,
+	.s_mbus_fmt = adv7175_s_fmt,
+	.g_mbus_fmt = adv7175_g_fmt,
+	.enum_mbus_fmt  = adv7175_enum_fmt,
 };
 
 static const struct v4l2_subdev_ops adv7175_ops = {

--
1.7.7