Skip to contentSkip to conversation

correct format for mounting cifs/smbfs shares

DISCUSSION Jeff Moyer 3 participants 5 messages Sep 7, 2005 – Sep 8, 2005 Kernel automounter

lore
Share & tools
lore

Jeff Moyer

author
#0 lore raw

Hi,

I had a user report a bug as follows:

---
Description of problem:
automount does not understand //hostname in its config files, which is needed by mount.cifs and mount.smbfs I found a "solution", but I don't like it:
use \/\/hostname in /etc/auto.misc file

Version-Release number of selected component (if applicable):
autofs-4.1.3-114
samba-client-3.0.14a-2.1.fc3.kde

How reproducible:
Always

Steps to Reproduce:
1. put following line in /etc/auto.misc file:
share -fstype=cifs //HOST/SHARE
(of course, I hope that you have host HOST with share SHARE and you can make mount -t cifs //HOST/SHARE /misc/share)

2. ls /misc/share

Actual Results: in /var/log/messages:
automount[1624]: mount(generic): failed to mount (type cifs) on /misc/share/HOST/share

Expected Results: //HOST/SHARE mounted in /misc/share ;-)

Additional info:

Same results with -fstype=smb
---

I have no experience with this. What is the expected configuration to get this to work?

Thanks,

Jeff

#1 lore raw

For automounting smb/cif I use this:

$ tail -3 /etc/auto.misc
windowsshare    -fstype=smbfs,username=mylogin,workgroup=myworkgroup,credentials=/etc/smbwindows.auth ://winserver/share1
unixshare    -fstype=smbfs,username=mylogin,credentials=/etc/smbunix.auth ://sambaserver/mylogin
$ cat /etc/smbunix.auth
username=mylogin
password=secret
$ cat /etc/smbwindows.auth
username=mylogin
password=secret
$ cd /misc/windowsshare
[root@calaz /misc/windowsshare]
$ df .
Filesystem           1K-blocks      Used Available Use% Mounted on
//winserver/share1        858652672 122945536 735707136  15% /misc/windowsshare

However, as you can see, I need two smb*.auth files because my password is diffrent on both shares (windows/unix)
And the major problem is THE use of a smb.auth file where the password must be in clear text :-( . If someone knows how to automount cifs/smb FS without pre-entering the password ... The problem is that If I don't do that, autofs/mount won't prompt me to enter the password :-( pehaps there's something to do with pamcred ... ?

thanks .

Quoted 51 lines · Jeff Moyer

Hi,

I had a user report a bug as follows:

---
Description of problem:
automount does not understand //hostname in its config files, which is needed by mount.cifs and mount.smbfs I found a "solution", but I don't like it:
use \/\/hostname in /etc/auto.misc file

Version-Release number of selected component (if applicable):
autofs-4.1.3-114
samba-client-3.0.14a-2.1.fc3.kde

How reproducible:
Always

Steps to Reproduce:
1. put following line in /etc/auto.misc file:
share -fstype=cifs //HOST/SHARE
(of course, I hope that you have host HOST with share SHARE and you can make mount -t cifs //HOST/SHARE /misc/share)

2. ls /misc/share

Actual Results: in /var/log/messages:
automount[1624]: mount(generic): failed to mount (type cifs) on /misc/share/HOST/share

Expected Results: //HOST/SHARE mounted in /misc/share ;-)

Additional info:

Same results with -fstype=smb
---

I have no experience with this. What is the expected configuration to get this to work?

Thanks,

Jeff

_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs

maintainer
#2 lore raw
Quoted 25 lines · Jehan PROCACCIA

For automounting smb/cif I use this:

$ tail -3 /etc/auto.misc
windowsshare
-fstype=smbfs,username=mylogin,workgroup=myworkgroup,credentials=/etc/smbwindows.auth
://winserver/share1
unixshare    -fstype=smbfs,username=mylogin,credentials=/etc/smbunix.auth
://sambaserver/mylogin
$ cat /etc/smbunix.auth
username=mylogin
password=secret
$ cat /etc/smbwindows.auth
username=mylogin
password=secret
$ cd /misc/windowsshare
[root@calaz /misc/windowsshare]
$ df .
Filesystem           1K-blocks      Used Available Use% Mounted on
//winserver/share1        858652672 122945536 735707136  15%
/misc/windowsshare
Quoted 7 lines

However, as you can see, I need two smb*.auth files because my password is diffrent on both shares (windows/unix)
And the major problem is THE use of a smb.auth file where the password must be in clear text :-( . If someone knows how to automount cifs/smb FS without pre-entering the password ... The problem is that If I don't do that, autofs/mount won't prompt me to enter the password :-(
pehaps there's something to do with pamcred ... ?

Mount doesn't know how to do this.
I agree that clear text passwords ar bad.
Aren't the permissions restrictive enough to protect them?

I don't know what pamcred could do. Let me know if you find a better method.

Quoted 62 lines

thanks .

Quoted 42 lines · Jeff Moyer

Hi,

I had a user report a bug as follows:

---
Description of problem:
automount does not understand //hostname in its config files, which is needed by mount.cifs and mount.smbfs
I found a "solution", but I don't like it:
use \/\/hostname in /etc/auto.misc file

Version-Release number of selected component (if applicable):
autofs-4.1.3-114
samba-client-3.0.14a-2.1.fc3.kde

How reproducible:
Always

Steps to Reproduce:
1. put following line in /etc/auto.misc file:
share -fstype=cifs
//HOST/SHARE
(of course, I hope that you have host HOST with share SHARE and you can make mount -t cifs //HOST/SHARE /misc/share)

2. ls /misc/share
Actual Results: in /var/log/messages:
automount[1624]: mount(generic): failed to mount (type cifs) on /misc/share/HOST/share

Expected Results: //HOST/SHARE mounted in /misc/share ;-)

Additional info:

Same results with -fstype=smb
---

I have no experience with this. What is the expected configuration to get this to work?

Quoted 9 lines

Thanks,

Jeff

_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs

_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs

#3 lore raw
Quoted 11 lines · Ian Kent

On Wed, 7 Sep 2005, Jehan PROCACCIA wrote:

Mount doesn't know how to do this.
I agree that clear text passwords ar bad.
Aren't the permissions restrictive enough to protect them?

I don't know what pamcred could do. Let me know if you find a better method.

don't know either ... but I suspect that it could help :
http://www.padl.com/OSS/pam_ccreds.html

maintainer
#4 lore raw
In reply to Jeff Moyer
Quoted 3 lines · Jeff Moyer

Hi,

I had a user report a bug as follows:

Jehan got it.
Remember the : Sun escape for map entries starting with /.

Quoted 47 lines

---
Description of problem:
automount does not understand //hostname in its config files, which is needed by mount.cifs and mount.smbfs I found a "solution", but I don't like it:
use \/\/hostname in /etc/auto.misc file

Version-Release number of selected component (if applicable):
autofs-4.1.3-114
samba-client-3.0.14a-2.1.fc3.kde

How reproducible:
Always

Steps to Reproduce:
1. put following line in /etc/auto.misc file:
share -fstype=cifs //HOST/SHARE
(of course, I hope that you have host HOST with share SHARE and you can make mount -t cifs //HOST/SHARE /misc/share)

2. ls /misc/share

Actual Results: in /var/log/messages:
automount[1624]: mount(generic): failed to mount (type cifs) on /misc/share/HOST/share

Expected Results: //HOST/SHARE mounted in /misc/share ;-)

Additional info:

Same results with -fstype=smb
---

I have no experience with this. What is the expected configuration to get this to work?

Thanks,

Jeff

_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs