Skip to contentSkip to conversation

rng-tools: Add Arm aarch64 CPU specific configuration to address excessive CPU usage on startup

PATCH Xiangyu Chen 3 participants 6 messages Nov 7, 2022 – Dec 9, 2022 3 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 11 lines · Xiangyu Chen

With the default jitter options aarch64 CPU-based devices typically experience continuous high CPU utilisation for several minutes after rngd starts.

Accoring to the rng-tools issue #150[1] and comments[2],in order to address this, the following configuration changes have been made, those configurations also can be found on Alpine Linux[3]:

- reduce the number of threads used to 1 in total, rather than 1 per core.
- reduce the buffer size from 16535 to 4133 which reduces the time taken to fill the buffer (and so reduces the duration of CPU load).

Quoted 8 lines

[1] https://github.com/nhorman/rng-tools/issues/150
[2] https://github.com/nhorman/rng-tools/issues/150#issuecomment-953079212
[3] https://git.alpinelinux.org/aports/tree/main/rng-tools/rngd.confd-arm

---
Changes in V2:
*put the aarch64 specific default file in meta/recipes-support/rng-tools/rng-tools/aarch64

Friendly ping. Is there any more concern on this?

Thanks,

Xiangyu

Quoted 31 lines
---
  .../rng-tools/rng-tools/aarch64/default               | 11 +++++++++++
  1 file changed, 11 insertions(+)

create mode 100644 meta/recipes-support/rng-tools/rng-tools/aarch64/default

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +11 -1
new file mode 100644
index 0000000000..5a2fbcc9ef
@@ -0,0 +1,11 @@
+# With the default jitter options Arm CPU-based devices typically experience
+# continuous high CPU utilisation for several minutes after rngd starts.
+# See https://gitlab.alpinelinux.org/alpine/aports/-/issues/13035 and
+# https://github.com/nhorman/rng-tools/issues/150
+# In order to address this the following configuration changes have been made:
+#
+#   - reduce the number of threads used to 1 in total, rather than 1 per core.
+#   - reduce the buffer size from 16535 to 4133 which reduces the time taken
+#     to fill the buffer (and so reduces the duration of CPU load).
+#
+EXTRA_ARGS="-r /dev/hwrng -O jitter:buffer_size:4133 -O jitter:refill_thresh:4133 -O jitter:thread_count:1"
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group.
View/Reply Online (#172349): https://lists.openembedded.org/g/openembedded-core/message/172349
Mute This Topic: https://lists.openembedded.org/mt/94701000/7175143
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#2 lore raw
Quoted 18 lines · Xiangyu Chen
Quoted 15 lines · Xiangyu Chen

With the default jitter options aarch64 CPU-based devices typically experience continuous high CPU utilisation for several minutes after rngd starts.

Accoring to the rng-tools issue #150[1] and comments[2],in order to address this, the following configuration changes have been made, those configurations also can be found on Alpine Linux[3]:

- reduce the number of threads used to 1 in total, rather than 1 per core.
- reduce the buffer size from 16535 to 4133 which reduces the time taken to fill the buffer (and so reduces the duration of CPU load).

[1] https://github.com/nhorman/rng-tools/issues/150
[2] https://github.com/nhorman/rng-tools/issues/150#issuecomment-953079212
[3] https://git.alpinelinux.org/aports/tree/main/rng-tools/rngd.confd-arm

Quoted 6 lines
Quoted 4 lines

---
Changes in V2:
*put the aarch64 specific default file in meta/recipes-support/rng-tools/rng-tools/aarch64

Friendly ping. Is there any more concern on this?

My concern is that will it be so for all aarch64 machines ?

Quoted 40 lines

Thanks,

Xiangyu

Quoted 15 lines
---
  .../rng-tools/rng-tools/aarch64/default               | 11 +++++++++++
  1 file changed, 11 insertions(+)

create mode 100644 meta/recipes-support/rng-tools/rng-tools/aarch64/default

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +1 -0
new file mode 100644
index 0000000000..5a2fbcc9ef
@@ -0,0 +1,11 @@
+# With the default jitter options Arm CPU-based devices typically experience

meta/recipes-support/rng-tools/rng-tools/aarch64/default line 11

Quoted 10 lines
meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +10 -0
+# continuous high CPU utilisation for several minutes after rngd starts.
+# See https://gitlab.alpinelinux.org/alpine/aports/-/issues/13035 and
+# https://github.com/nhorman/rng-tools/issues/150
+# In order to address this the following configuration changes have been made:
+#
+#   - reduce the number of threads used to 1 in total, rather than 1 per core.
+#   - reduce the buffer size from 16535 to 4133 which reduces the time taken
+#     to fill the buffer (and so reduces the duration of CPU load).
+#
+EXTRA_ARGS="-r /dev/hwrng -O jitter:buffer_size:4133 -O jitter:refill_thresh:4133 -O jitter:thread_count:1"

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#172819): https://lists.openembedded.org/g/openembedded-core/message/172819
Mute This Topic: https://lists.openembedded.org/mt/94701000/1997914
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#3 lore raw
Quoted 21 lines · Khem Raj

CAUTION: This email comes from a non Wind River email account!
Do not click links or open attachments unless you recognize the sender and know the content is safe.

Quoted 17 lines · Xiangyu Chen
Quoted 15 lines · Xiangyu Chen

With the default jitter options aarch64 CPU-based devices typically experience continuous high CPU utilisation for several minutes after rngd starts.

Accoring to the rng-tools issue #150[1] and comments[2],in order to address this, the following configuration changes have been made, those configurations also can be found on Alpine Linux[3]:

- reduce the number of threads used to 1 in total, rather than 1 per core.
- reduce the buffer size from 16535 to 4133 which reduces the time taken to fill the buffer (and so reduces the duration of CPU load).

[1] https://github.com/nhorman/rng-tools/issues/150
[2] https://github.com/nhorman/rng-tools/issues/150#issuecomment-953079212
[3] https://git.alpinelinux.org/aports/tree/main/rng-tools/rngd.confd-arm

Quoted 6 lines
Quoted 5 lines
Quoted 4 lines

---
Changes in V2:
*put the aarch64 specific default file in meta/recipes-support/rng-tools/rng-tools/aarch64

Friendly ping. Is there any more concern on this?

My concern is that will it be so for all aarch64 machines ?

I tested two aarch64 platforms on my hand, zynqmp and raspi4, the rng-tools behavior is the same, when service start, the jitter random generator would load full cpu cores load. It would cause other services take long time to start. I also checked another linux distribution, so far, only Alpine Linux processed this issue and it applied those configurations on all aarch64 platforms.

Thanks,

Xiangyu

Quoted 39 lines
Quoted 39 lines

Thanks,

Xiangyu

Quoted 15 lines
---
   .../rng-tools/rng-tools/aarch64/default               | 11 +++++++++++
   1 file changed, 11 insertions(+)

create mode 100644 meta/recipes-support/rng-tools/rng-tools/aarch64/default

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +1 -0
new file mode 100644
index 0000000000..5a2fbcc9ef
@@ -0,0 +1,11 @@
+# With the default jitter options Arm CPU-based devices typically experience

meta/recipes-support/rng-tools/rng-tools/aarch64/default line 11

Quoted 10 lines
meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +10 -0
+# continuous high CPU utilisation for several minutes after rngd starts.
+# See https://gitlab.alpinelinux.org/alpine/aports/-/issues/13035 and
+# https://github.com/nhorman/rng-tools/issues/150
+# In order to address this the following configuration changes have been made:
+#
+#   - reduce the number of threads used to 1 in total, rather than 1 per core.
+#   - reduce the buffer size from 16535 to 4133 which reduces the time taken
+#     to fill the buffer (and so reduces the duration of CPU load).
+#
+EXTRA_ARGS="-r /dev/hwrng -O jitter:buffer_size:4133 -O jitter:refill_thresh:4133 -O jitter:thread_count:1"

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#172819): https://lists.openembedded.org/g/openembedded-core/message/172819
Mute This Topic: https://lists.openembedded.org/mt/94701000/1997914
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

A message that is not in the archive (sent off-list or not yet received): [email protected]

#5 lore raw
Quoted 25 lines · Xiangyu Chen
Quoted 23 lines · Khem Raj

CAUTION: This email comes from a non Wind River email account!
Do not click links or open attachments unless you recognize the sender and know the content is safe.

Quoted 19 lines · Xiangyu Chen
Quoted 17 lines · Xiangyu Chen

With the default jitter options aarch64 CPU-based devices typically experience continuous high CPU utilisation for several minutes after rngd starts.

Accoring to the rng-tools issue #150[1] and comments[2],in order to address this, the following configuration changes have been made, those configurations also can be found on Alpine Linux[3]:

- reduce the number of threads used to 1 in total, rather than 1 per core.
- reduce the buffer size from 16535 to 4133 which reduces the time taken
    to fill the buffer (and so reduces the duration of CPU load).

[1] https://github.com/nhorman/rng-tools/issues/150
[2] https://github.com/nhorman/rng-tools/issues/150#issuecomment-953079212
[3] https://git.alpinelinux.org/aports/tree/main/rng-tools/rngd.confd-arm

Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines

---
Changes in V2:
    *put the aarch64 specific default file in meta/recipes-support/rng-tools/rng-tools/aarch64

Friendly ping. Is there any more concern on this?

My concern is that will it be so for all aarch64 machines ?

Please discard this thread, we also found that the rng-tools high cpu usage not only on ARM64 but also on ARM32 platform(also include qemuarm/qemuarm64), it's a common issue on ARM platform.

A new patch has been sent to list as below link, tested in my local setup, thanks.

https://lists.openembedded.org/g/openembedded-core/message/173266

https://patchwork.yoctoproject.org/project/oe-core/patch/[email protected]/

Thanks,

Xiangyu

Quoted 53 lines

I tested two aarch64 platforms on my hand, zynqmp and raspi4, the rng-tools behavior is the same, when service start, the jitter random generator would load full cpu cores load. It would cause other services take long time to start. I also checked another linux distribution, so far, only Alpine Linux processed this issue and it applied those configurations on all aarch64 platforms.

Thanks,

Xiangyu
Thanks,

Xiangyu

Quoted 28 lines

---
   .../rng-tools/rng-tools/aarch64/default               | 11
+++++++++++

   1 file changed, 11 insertions(+)

   create mode 100644 meta/recipes-support/rng-tools/rng-tools/aarch64/default

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +1 -0
new file mode 100644
index 0000000000..5a2fbcc9ef
@@ -0,0 +1,11 @@
+# With the default jitter options Arm CPU-based devices typically 

experience
+# continuous high CPU utilisation for several minutes after rngd starts.

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +3 -0
+# See https://gitlab.alpinelinux.org/alpine/aports/-/issues/13035 and
+# https://github.com/nhorman/rng-tools/issues/150
+# In order to address this the following configuration changes have 

been made:

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +2 -0
+#
+#   - reduce the number of threads used to 1 in total, rather than 1 

per core.
+#   - reduce the buffer size from 16535 to 4133 which reduces the time taken

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +3 -0
+#     to fill the buffer (and so reduces the duration of CPU load).
+#
+EXTRA_ARGS="-r /dev/hwrng -O jitter:buffer_size:4133 -O 
Quoted 4 lines

jitter:refill_thresh:4133 -O jitter:thread_count:1"

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#172821): https://lists.openembedded.org/g/openembedded-core/message/172821
Mute This Topic: https://lists.openembedded.org/mt/94701000/7175143
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#6 lore raw
In reply to Khem Raj
Quoted 21 lines · Khem Raj

CAUTION: This email comes from a non Wind River email account!
Do not click links or open attachments unless you recognize the sender and know the content is safe.

Quoted 17 lines · Xiangyu Chen
Quoted 15 lines · Xiangyu Chen

With the default jitter options aarch64 CPU-based devices typically experience continuous high CPU utilisation for several minutes after rngd starts.

Accoring to the rng-tools issue #150[1] and comments[2],in order to address this, the following configuration changes have been made, those configurations also can be found on Alpine Linux[3]:

- reduce the number of threads used to 1 in total, rather than 1 per core.
- reduce the buffer size from 16535 to 4133 which reduces the time taken to fill the buffer (and so reduces the duration of CPU load).

[1] https://github.com/nhorman/rng-tools/issues/150
[2] https://github.com/nhorman/rng-tools/issues/150#issuecomment-953079212
[3] https://git.alpinelinux.org/aports/tree/main/rng-tools/rngd.confd-arm

Quoted 6 lines
Quoted 5 lines
Quoted 4 lines

---
Changes in V2:
*put the aarch64 specific default file in meta/recipes-support/rng-tools/rng-tools/aarch64

Friendly ping. Is there any more concern on this?

My concern is that will it be so for all aarch64 machines ?

Regarding the rng-tools high cpu usage still need to be discussed here.

Currently, on some platforms like ARM, there is not any good idea to solve the rng-tools jitter module take full cpu load during the daemon start. In fact, after kernel v5.6, the /dev/random doesn't block anymore, so, perhaps we can use the parameter to limit rng-tools resource during it start up, does anyone have any ideas to propose?  Thanks!

Br,

Xiangyu

Quoted 39 lines
Quoted 39 lines

Thanks,

Xiangyu

Quoted 15 lines
---
   .../rng-tools/rng-tools/aarch64/default               | 11 +++++++++++
   1 file changed, 11 insertions(+)

create mode 100644 meta/recipes-support/rng-tools/rng-tools/aarch64/default

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +1 -0
new file mode 100644
index 0000000000..5a2fbcc9ef
@@ -0,0 +1,11 @@
+# With the default jitter options Arm CPU-based devices typically experience

meta/recipes-support/rng-tools/rng-tools/aarch64/default line 11

Quoted 10 lines
meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +10 -0
+# continuous high CPU utilisation for several minutes after rngd starts.
+# See https://gitlab.alpinelinux.org/alpine/aports/-/issues/13035 and
+# https://github.com/nhorman/rng-tools/issues/150
+# In order to address this the following configuration changes have been made:
+#
+#   - reduce the number of threads used to 1 in total, rather than 1 per core.
+#   - reduce the buffer size from 16535 to 4133 which reduces the time taken
+#     to fill the buffer (and so reduces the duration of CPU load).
+#
+EXTRA_ARGS="-r /dev/hwrng -O jitter:buffer_size:4133 -O jitter:refill_thresh:4133 -O jitter:thread_count:1"

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#172819): https://lists.openembedded.org/g/openembedded-core/message/172819
Mute This Topic: https://lists.openembedded.org/mt/94701000/1997914
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

A message that is not in the archive (sent off-list or not yet received): [email protected]

#8 lore raw
Quoted 29 lines · Xiangyu Chen
Quoted 27 lines · Khem Raj

CAUTION: This email comes from a non Wind River email account!
Do not click links or open attachments unless you recognize the sender and know the content is safe.

Quoted 23 lines · Xiangyu Chen
Quoted 21 lines · Xiangyu Chen

With the default jitter options aarch64 CPU-based devices typically experience continuous high CPU utilisation for several minutes after rngd starts.

Accoring to the rng-tools issue #150[1] and comments[2],in order to address this, the following configuration changes have been made, those configurations also can be found on Alpine Linux[3]:

- reduce the number of threads used to 1 in total, rather than 1 per core.
- reduce the buffer size from 16535 to 4133 which reduces the time taken
    to fill the buffer (and so reduces the duration of CPU load).

[1] https://github.com/nhorman/rng-tools/issues/150
[2] https://github.com/nhorman/rng-tools/issues/150#issuecomment-953079212
[3] https://git.alpinelinux.org/aports/tree/main/rng-tools/rngd.confd-arm

---
Changes in V2:
    *put the aarch64 specific default file in meta/recipes-support/rng-tools/rng-tools/aarch64

Quoted 6 lines
Quoted 2 lines
Quoted 1 line

Friendly ping. Is there any more concern on this?

My concern is that will it be so for all aarch64 machines ?

Regarding the rng-tools high cpu usage still need to be discussed here.

Currently, on some platforms like ARM, there is not any good idea to solve the rng-tools jitter module take full cpu load during the daemon start. In fact, after kernel v5.6, the /dev/random doesn't block anymore, so, perhaps we can use the parameter to limit rng-tools resource during it start up, does anyone have any ideas to propose?  Thanks!

We have verified 2 boards on kernel 5.6 later, 1 board without rngd, random number was also generated in perfectly speed, sshd also was working well.

But in another board on kernel 5.2 without rngd, a testing random progress was blocked due to no enough entropy.

From the log, on kernel 5.15, we can observe that crng init in early stage before mounting the rootfs,but on kernel 5.2, crng init after rootfs was mounted, and although crng inited, the entropy still low if rngd not start, a dd test progress was blocked due to low entropy, that's explain why openssh enabled the rngd/rng-tools .

So, from the test result we can see, for newly kernel, the rngd seems not necessary any more.

Testing result as below:

Board 1: Marvell CN96xx CRB (Cortex A72, aarch64)

crng init stage:

oot@marvell-cn96xx:~# dmesg | grep -C 5 crng
[   88.486463] bus: 'pci': __driver_probe_device: matched device 0000:03:00.1 with driver cavium_rng_vf
[   88.486513] bus: 'pci': really_probe: probing driver cavium_rng_vf with device 0000:03:00.1
[   88.488911] cavium_rng_vf 0000:03:00.1: Adding to iommu group 73
[   88.516290] cavium_rng_vf 0000:03:00.1: assign IRQ: got 0
[   88.519205] driver: 'cavium_rng_vf': driver_bound: bound to device '0000:03:00.1'
[   88.519459] bus: 'pci': really_probe: bound device 0000:03:00.1 to driver cavium_rng_vf
[   88.519473] random: crng init done
[   88.519723] driver: 'cavium_rng_pf': driver_bound: bound to device '0000:03:00.0'
[   88.523222] bus: 'pci': really_probe: bound device 0000:03:00.0 to driver cavium_rng_pf
[   88.523295] devices_kset: Moving 0000:01:01.4 to end of list
[   88.523320] PM: Moving pci:0000:01:01.4 to end of list

Kernel version:

root@marvell-cn96xx:~# uname -a
Linux marvell-cn96xx 5.15.78-yocto-standard #1 SMP PREEMPT Wed Nov 23 04:17:58 UTC 2022 aarch64 aarch64 aarch64 GNU/Linux

Disabled rng-tools(rngd) and testing read random, we can observe almost 20.4 MB/s random number was generated from /dev/random with dd command, rngtest also was working well:

root@marvell-cn96xx:~# systemctl stop rng-tools
root@marvell-cn96xx:~# ps -ef |grep rng
root         441       2  0 10:59 ?        00:00:00 [hwrng]
root         864     848  0 11:02 pts/0    00:00:00 grep rng
root@marvell-cn96xx:~# dd if=/dev/random of=/dev/null status=progress
1342177280 bytes (1.3 GB, 1.2 GiB) copied, 66 s, 20.4 MB/s
10+0 records in
10+0 records out
1342177280 bytes (1.3 GB, 1.2 GiB) copied, 65.7033 s, 20.4 MB/s
root@marvell-cn96xx:~# rngtest -c 1000 </dev/random
rngtest 6.15
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 1000
rngtest: FIPS 140-2 failures: 0
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 0
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=4.340; avg=135.364; max=146.719)Mibits/s
rngtest: FIPS tests speed: (min=8.197; avg=69.020; max=72.800)Mibits/s
rngtest: Program run time: 418771 microseconds
root@marvell-cn96xx:~# echo $?
0
root@marvell-cn96xx:~#

Board 2: NXP i.mx6q(Cortex-A9 armb7l  32bit)

crng init stage:

root@nxp-imx6:~# journalctl -k
Apr 28 17:42:27 nxp-imx6 kernel: Booting Linux on physical CPU 0x0
Apr 28 17:42:27 nxp-imx6 kernel: Linux version 5.15.80-yocto-standard (oe-user@oe-host) (arm-wrs-linux-gnueabi-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Dec 5 17:32:29 UT>
Apr 28 17:42:27 nxp-imx6 kernel: CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
Apr 28 17:42:27 nxp-imx6 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Apr 28 17:42:27 nxp-imx6 kernel: OF: fdt: Machine model: Freescale i.MX6 Quad SABRE Smart Device Board
Apr 28 17:42:27 nxp-imx6 kernel: Memory policy: Data cache writealloc
Apr 28 17:42:27 nxp-imx6 kernel: Reserved memory: created CMA memory pool at 0x2c000000, size 320 MiB
Apr 28 17:42:27 nxp-imx6 kernel: OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Apr 28 17:42:27 nxp-imx6 kernel: Zone ranges:
......
Apr 28 17:42:27 nxp-imx6 kernel: mmcblk2: mmc2:ccbe SD02G 1.84 GiB
Apr 28 17:42:27 nxp-imx6 kernel: random: crng init done
Apr 28 17:42:27 nxp-imx6 kernel:  mmcblk2: p1 p2

Kernel version:

root@nxp-imx6:~# uname -a
Linux nxp-imx6 5.15.80-yocto-standard #1 SMP PREEMPT Mon Dec 5 17:32:29 UTC 2022 armv7l armv7l armv7l GNU/Linux

Disabled rng-tools(rngd) and testing read random, we can observe almost 31.9 MB/s random number was generated from /dev/random with dd command,r ngtest also was working well:

root@nxp-imx6:~# rngtest -c 1000 </dev/random
rngtest 6.15
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 999
rngtest: FIPS 140-2 failures: 1
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 0
rngtest: FIPS 140-2(2001-10-10) Long run: 1
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=96.820; avg=326.769; max=340.598)Mibits/s
rngtest: FIPS tests speed: (min=15.090; avg=37.543; max=40.324)Mibits/s
rngtest: Program run time: 570229 microseconds
root@nxp-imx6:~#
root@nxp-imx6:~# dd if=/dev/random of=/dev/null status=progress
318916096 bytes (319 MB, 304 MiB) copied, 10 s, 31.9 MB/s^C
676517+0 records in
676516+0 records out
346376192 bytes (346 MB, 330 MiB) copied, 10.8611 s, 31.9 MB/s

Board 3: imx8q with kernel 5.2

crng init stage:

root@nxp-imx8:~# dmesg | grep -C 5 crng
[   13.219541] [VPU Decoder] error: vpu_firmware_download() request fw vpu/vpu_fw_imx8_dec.bin failed(-2)
[   13.228465] [VPU Encoder] error: vpu_firmware_download fail
[   13.236340] [VPU Decoder] error: vpu_firmware_download fail
[   13.244367] [VPU Encoder] failed to create encoder ctx
[   13.769137] fsl-audmix 59840000.audmix: Started TDM1 needed for config propagation!
[   14.967484] random: crng init done
[   14.969603] random: 7 urandom warning(s) missed due to ratelimiting
[   15.724775] fsl-audmix 59840000.audmix: Started TDM1 needed for config propagation!
[   39.911462] can-en: disabling
[   39.913138] can-stby: disabling

Kernel version:

root@nxp-imx8:~# uname -a
Linux nxp-imx8 5.2.60-yocto-standard #1 SMP PREEMPT Mon Feb 28 13:28:52 UTC 2022 aarch64 aarch64 aarch64 GNU/Linux

Disabled the rngd and reboot again, the system available entropy very low:

root@nxp-imx8:~# cat /proc/sys/kernel/random/entropy_avail
36

Using dd command to read random was blocked until break by manual:

root@nxp-imx8:~# dd if=/dev/random of=/dev/null status=progress
^C0+0 records in
0+0 records out
0 bytes copied, 3.96411 s, 0.0 kB/s

The rngtest util also was blocked until break by manual:

root@nxp-imx8:~# ps -ef |grep rng
root         459     448  0 13:42 pts/0    00:00:00 grep rng
root@nxp-imx8:~# rngtest -c 1000 </dev/random
rngtest 6.7
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.rngtest: starting FIPS tests...
^Crngtest: bits received from input: 48
rngtest: FIPS 140-2 successes: 0
rngtest: FIPS 140-2 failures: 0
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 0
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=0.000; avg=0.000; max=0.000)bits/s
rngtest: FIPS tests speed: (min=0.000; avg=0.000; max=0.000)bits/s
rngtest: Program run time: 91647889 microseconds
root@nxp-imx8:~#
Quoted 54 lines

Br,

Xiangyu

Quoted 32 lines
Quoted 32 lines

Thanks,

Xiangyu

Quoted 26 lines

---
   .../rng-tools/rng-tools/aarch64/default               | 11
+++++++++++

   1 file changed, 11 insertions(+)

   create mode 100644 meta/recipes-support/rng-tools/rng-tools/aarch64/default

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +1 -0
new file mode 100644
index 0000000000..5a2fbcc9ef
@@ -0,0 +1,11 @@
+# With the default jitter options Arm CPU-based devices typically 

experience
+# continuous high CPU utilisation for several minutes after rngd starts.

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +3 -0
+# See https://gitlab.alpinelinux.org/alpine/aports/-/issues/13035 and
+# https://github.com/nhorman/rng-tools/issues/150
+# In order to address this the following configuration changes 

have been made:

meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +2 -0
+#
+#   - reduce the number of threads used to 1 in total, rather than 

1 per core.
+#   - reduce the buffer size from 16535 to 4133 which reduces the time taken
+#     to fill the buffer (and so reduces the duration of CPU load).

Quoted 8 lines
Quoted 8 lines
Quoted 6 lines
meta/recipes-support/rng-tools/rng-tools/aarch64/default new file +2 -0
+#
+EXTRA_ARGS="-r /dev/hwrng -O jitter:buffer_size:4133 -O 

jitter:refill_thresh:4133 -O jitter:thread_count:1"

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#174348):https://lists.openembedded.org/g/openembedded-core/message/174348 Mute This Topic:https://lists.openembedded.org/mt/94701000/7175143
Group Owner:[email protected] Unsubscribe:https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-