Linux 3.7-rc1 (nouveau_bios_score oops).
Subsystems (4)
Hi,
the new 3.7.0-rc1-00078-g8d2b6b3 kernel oopses during startup on my asus laptop with nvidia optimius crap and the builtin core-i7 graphics doesn't start. the 3.5/3.6 kernels work fine, so this looks like a fresh regression.
BR,
Paweł.
Oct 18 07:52:20 localhost kernel: [ 0.408507] Brought up 8 CPUs Oct 18 07:52:20 localhost kernel: [ 0.408616] smpboot: Total of 8 processors activated (31940.98 BogoMIPS) Oct 18 07:52:20 localhost kernel: [ 0.416717] devtmpfs: initialized Oct 18 07:52:20 localhost kernel: [ 0.420360] PM: Registering ACPI NVS region [mem 0xaaf09000-0xaafe7fff] (913408 bytes) Oct 18 07:52:20 localhost kernel: [ 0.421640] regulator-dummy: no parameters Oct 18 07:52:20 localhost kernel: [ 0.422014] NET: Registered protocol family 16 Oct 18 07:52:20 localhost kernel: [ 0.422941] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it Oct 18 07:52:20 localhost kernel: [ 0.423030] ACPI: bus type pci registered Oct 18 07:52:20 localhost kernel: [ 0.423385] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) Oct 18 07:52:20 localhost kernel: [ 0.423468] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 Oct 18 07:52:20 localhost kernel: [ 0.438825] PCI: Using configuration type 1 for base access Oct 18 07:52:20 localhost kernel: [ 0.444903] bio: create slab <bio-0> at 0 Oct 18 07:52:20 localhost kernel: [ 0.445253] ACPI: Added _OSI(Module Device) Oct 18 07:52:20 localhost kernel: [ 0.445312] ACPI: Added _OSI(Processor Device) Oct 18 07:52:20 localhost kernel: [ 0.445371] ACPI: Added _OSI(3.0 _SCP Extensions) Oct 18 07:52:20 localhost kernel: [ 0.445431] ACPI: Added _OSI(Processor Aggregator Device) Oct 18 07:52:20 localhost kernel: [ 0.453076] ACPI: EC: EC description table is found, configuring boot EC Oct 18 07:52:20 localhost kernel: [ 0.453144] ACPI: EC: Look up EC in DSDT Oct 18 07:52:20 localhost kernel: [ 0.461298] ACPI: Executed 1 blocks of module-level executable AML code Oct 18 07:52:20 localhost kernel: [ 0.469487] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored Oct 18 07:52:20 localhost kernel: [ 0.538242] ACPI: SSDT 00000000aadcc718 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112) Oct 18 07:52:20 localhost kernel: [ 0.540314] ACPI: Dynamic OEM Table Load: Oct 18 07:52:20 localhost kernel: [ 0.540447] ACPI: SSDT (null) 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112) Oct 18 07:52:20 localhost kernel: [ 0.554744] ACPI: SSDT 00000000aadcda98 00303 (v01 PmRef ApIst 00003000 INTL 20091112) Oct 18 07:52:20 localhost kernel: [ 0.556875] ACPI: Dynamic OEM Table Load: Oct 18 07:52:20 localhost kernel: [ 0.557008] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112) Oct 18 07:52:20 localhost kernel: [ 0.571191] ACPI: SSDT 00000000aadcbd98 00119 (v01 PmRef ApCst 00003000 INTL 20091112) Oct 18 07:52:20 localhost kernel: [ 0.573266] ACPI: Dynamic OEM Table Load: Oct 18 07:52:20 localhost kernel: [ 0.573399] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112) Oct 18 07:52:20 localhost kernel: [ 0.575625] ACPI: Interpreter enabled Oct 18 07:52:20 localhost kernel: [ 0.575687] ACPI: (supports S0 S1 S3 S4 S5) Oct 18 07:52:20 localhost kernel: [ 0.575981] ACPI: Using IOAPIC for interrupt routing Oct 18 07:52:20 localhost kernel: [ 0.698001] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 Oct 18 07:52:20 localhost kernel: [ 0.698678] ACPI: No dock devices found. Oct 18 07:52:20 localhost kernel: [ 0.698738] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Oct 18 07:52:20 localhost kernel: [ 0.699235] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) Oct 18 07:52:20 localhost kernel: [ 0.700243] PCI host bridge to bus 0000:00 Oct 18 07:52:20 localhost kernel: [ 0.700305] pci_bus 0000:00: root bus resource [bus 00-3e] Oct 18 07:52:20 localhost kernel: [ 0.700366] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] Oct 18 07:52:20 localhost kernel: [ 0.700429] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] Oct 18 07:52:20 localhost kernel: [ 0.700491] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] Oct 18 07:52:20 localhost kernel: [ 0.700555] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] Oct 18 07:52:20 localhost kernel: [ 0.700618] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] Oct 18 07:52:20 localhost kernel: [ 0.700681] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] Oct 18 07:52:20 localhost kernel: [ 0.700744] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] Oct 18 07:52:20 localhost kernel: [ 0.700806] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] Oct 18 07:52:20 localhost kernel: [ 0.700870] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] Oct 18 07:52:20 localhost kernel: [ 0.700940] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] Oct 18 07:52:20 localhost kernel: [ 0.701004] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] Oct 18 07:52:20 localhost kernel: [ 0.701108] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 Oct 18 07:52:20 localhost kernel: [ 0.701202] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 Oct 18 07:52:20 localhost kernel: [ 0.701266] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.701328] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 Oct 18 07:52:20 localhost kernel: [ 0.701348] pci 0000:00:02.0: reg 10: [mem 0xdc400000-0xdc7fffff 64bit] Oct 18 07:52:20 localhost kernel: [ 0.701359] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 0.701366] pci 0000:00:02.0: reg 20: [io 0xe000-0xe03f] Oct 18 07:52:20 localhost kernel: [ 0.701477] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 Oct 18 07:52:20 localhost kernel: [ 0.701519] pci 0000:00:16.0: reg 10: [mem 0xdf00a000-0xdf00a00f 64bit] Oct 18 07:52:20 localhost kernel: [ 0.701659] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.701722] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 Oct 18 07:52:20 localhost kernel: [ 0.701759] pci 0000:00:1a.0: reg 10: [mem 0xdf008000-0xdf0083ff] Oct 18 07:52:20 localhost kernel: [ 0.701926] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.701974] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 Oct 18 07:52:20 localhost kernel: [ 0.702002] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit] Oct 18 07:52:20 localhost kernel: [ 0.702139] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.702181] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 Oct 18 07:52:20 localhost kernel: [ 0.702331] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.702376] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 Oct 18 07:52:20 localhost kernel: [ 0.702525] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.702571] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 Oct 18 07:52:20 localhost kernel: [ 0.702718] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.702765] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 Oct 18 07:52:20 localhost kernel: [ 0.702915] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.702971] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 Oct 18 07:52:20 localhost kernel: [ 0.703008] pci 0000:00:1d.0: reg 10: [mem 0xdf007000-0xdf0073ff] Oct 18 07:52:20 localhost kernel: [ 0.703176] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.703220] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 Oct 18 07:52:20 localhost kernel: [ 0.703434] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 Oct 18 07:52:20 localhost kernel: [ 0.703471] pci 0000:00:1f.2: reg 10: [io 0xe0b0-0xe0b7] Oct 18 07:52:20 localhost kernel: [ 0.703485] pci 0000:00:1f.2: reg 14: [io 0xe0a0-0xe0a3] Oct 18 07:52:20 localhost kernel: [ 0.703500] pci 0000:00:1f.2: reg 18: [io 0xe090-0xe097] Oct 18 07:52:20 localhost kernel: [ 0.703515] pci 0000:00:1f.2: reg 1c: [io 0xe080-0xe083] Oct 18 07:52:20 localhost kernel: [ 0.703530] pci 0000:00:1f.2: reg 20: [io 0xe060-0xe07f] Oct 18 07:52:20 localhost kernel: [ 0.703545] pci 0000:00:1f.2: reg 24: [mem 0xdf006000-0xdf0067ff] Oct 18 07:52:20 localhost kernel: [ 0.703641] pci 0000:00:1f.2: PME# supported from D3hot Oct 18 07:52:20 localhost kernel: [ 0.703674] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 Oct 18 07:52:20 localhost kernel: [ 0.703701] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit] Oct 18 07:52:20 localhost kernel: [ 0.703742] pci 0000:00:1f.3: reg 20: [io 0xe040-0xe05f] Oct 18 07:52:20 localhost kernel: [ 0.703848] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000 Oct 18 07:52:20 localhost kernel: [ 0.703861] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff] Oct 18 07:52:20 localhost kernel: [ 0.703875] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 0.703889] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 0.703898] pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f] Oct 18 07:52:20 localhost kernel: [ 0.703907] pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref] Oct 18 07:52:20 localhost kernel: [ 0.710950] pci 0000:00:01.0: PCI bridge to [bus 01] Oct 18 07:52:20 localhost kernel: [ 0.711048] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] Oct 18 07:52:20 localhost kernel: [ 0.711052] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff] Oct 18 07:52:20 localhost kernel: [ 0.711058] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 0.711140] pci 0000:00:1c.0: PCI bridge to [bus 02] Oct 18 07:52:20 localhost kernel: [ 0.711204] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] Oct 18 07:52:20 localhost kernel: [ 0.711210] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff] Oct 18 07:52:20 localhost kernel: [ 0.711220] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 0.711334] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000 Oct 18 07:52:20 localhost kernel: [ 0.711374] pci 0000:03:00.0: reg 10: [mem 0xddc00000-0xddc0ffff 64bit] Oct 18 07:52:20 localhost kernel: [ 0.711574] pci 0000:03:00.0: supports D1 Oct 18 07:52:20 localhost kernel: [ 0.711576] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.717601] pci 0000:00:1c.1: PCI bridge to [bus 03] Oct 18 07:52:20 localhost kernel: [ 0.717704] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] Oct 18 07:52:20 localhost kernel: [ 0.717711] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff] Oct 18 07:52:20 localhost kernel: [ 0.717721] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 0.717836] pci 0000:04:00.0: [1b73:1000] type 00 class 0x0c0330 Oct 18 07:52:20 localhost kernel: [ 0.717866] pci 0000:04:00.0: reg 10: [mem 0xdd200000-0xdd20ffff] Oct 18 07:52:20 localhost kernel: [ 0.718089] pci 0000:04:00.0: PME# supported from D0 D3hot Oct 18 07:52:20 localhost kernel: [ 0.724265] pci 0000:00:1c.3: PCI bridge to [bus 04] Oct 18 07:52:20 localhost kernel: [ 0.724367] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff] Oct 18 07:52:20 localhost kernel: [ 0.724375] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff] Oct 18 07:52:20 localhost kernel: [ 0.724386] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 0.724501] pci 0000:05:00.0: [1969:1083] type 00 class 0x020000 Oct 18 07:52:20 localhost kernel: [ 0.724542] pci 0000:05:00.0: reg 10: [mem 0xdc800000-0xdc83ffff 64bit] Oct 18 07:52:20 localhost kernel: [ 0.724564] pci 0000:05:00.0: reg 18: [io 0x9000-0x907f] Oct 18 07:52:20 localhost kernel: [ 0.724757] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 18 07:52:20 localhost kernel: [ 0.730931] pci 0000:00:1c.5: PCI bridge to [bus 05] Oct 18 07:52:20 localhost kernel: [ 0.731032] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff] Oct 18 07:52:20 localhost kernel: [ 0.731039] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff] Oct 18 07:52:20 localhost kernel: [ 0.731049] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 0.731091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 18 07:52:20 localhost kernel: [ 0.731473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Oct 18 07:52:20 localhost kernel: [ 0.731542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] Oct 18 07:52:20 localhost kernel: [ 0.731615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Oct 18 07:52:20 localhost kernel: [ 0.731687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] Oct 18 07:52:20 localhost kernel: [ 0.731791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGR._PRT] Oct 18 07:52:20 localhost kernel: [ 0.731884] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM Oct 18 07:52:20 localhost kernel: [ 0.731962] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) Oct 18 07:52:20 localhost kernel: [ 1.435359] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) Oct 18 07:52:20 localhost kernel: [ 1.435953] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 10 11 12 14 15) Oct 18 07:52:20 localhost kernel: [ 1.436544] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 10 11 12 14 15) Oct 18 07:52:20 localhost kernel: [ 1.437130] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) Oct 18 07:52:20 localhost kernel: [ 1.437729] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. Oct 18 07:52:20 localhost kernel: [ 1.438414] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. Oct 18 07:52:20 localhost kernel: [ 1.439092] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15) Oct 18 07:52:20 localhost kernel: [ 1.439682] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15) Oct 18 07:52:20 localhost kernel: [ 1.440757] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Oct 18 07:52:20 localhost kernel: [ 1.440846] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none Oct 18 07:52:20 localhost kernel: [ 1.440925] vgaarb: loaded Oct 18 07:52:20 localhost kernel: [ 1.440980] vgaarb: bridge control possible 0000:01:00.0 Oct 18 07:52:20 localhost kernel: [ 1.441040] vgaarb: no bridge control possible 0000:00:02.0 Oct 18 07:52:20 localhost kernel: [ 1.441919] PCI: Using ACPI for IRQ routing Oct 18 07:52:20 localhost kernel: [ 1.444906] PCI: pci_cache_line_size set to 64 bytes Oct 18 07:52:20 localhost kernel: [ 1.445016] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] Oct 18 07:52:20 localhost kernel: [ 1.445019] e820: reserve RAM buffer [mem 0xaabd1000-0xabffffff] Oct 18 07:52:20 localhost kernel: [ 1.445022] e820: reserve RAM buffer [mem 0xaace6000-0xabffffff] Oct 18 07:52:20 localhost kernel: [ 1.445025] e820: reserve RAM buffer [mem 0xaacfa000-0xabffffff] Oct 18 07:52:20 localhost kernel: [ 1.445028] e820: reserve RAM buffer [mem 0xaad8f000-0xabffffff] Oct 18 07:52:20 localhost kernel: [ 1.445030] e820: reserve RAM buffer [mem 0xaadc8000-0xabffffff] Oct 18 07:52:20 localhost kernel: [ 1.445032] e820: reserve RAM buffer [mem 0xaaf09000-0xabffffff] Oct 18 07:52:20 localhost kernel: [ 1.445035] e820: reserve RAM buffer [mem 0xaaffd000-0xabffffff] Oct 18 07:52:20 localhost kernel: [ 1.445037] e820: reserve RAM buffer [mem 0x34fe00000-0x34fffffff] Oct 18 07:52:20 localhost kernel: [ 1.445636] NetLabel: Initializing Oct 18 07:52:20 localhost kernel: [ 1.445693] NetLabel: domain hash size = 128 Oct 18 07:52:20 localhost kernel: [ 1.445750] NetLabel: protocols = UNLABELED CIPSOv4 Oct 18 07:52:20 localhost kernel: [ 1.445851] NetLabel: unlabeled traffic allowed by default Oct 18 07:52:20 localhost kernel: [ 1.445922] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 Oct 18 07:52:20 localhost kernel: [ 1.446321] hpet0: 8 comparators, 64-bit 14.318180 MHz counter Oct 18 07:52:20 localhost kernel: [ 1.448406] Switching to clocksource hpet Oct 18 07:52:20 localhost kernel: [ 1.454041] pnp: PnP ACPI init Oct 18 07:52:20 localhost kernel: [ 1.454129] ACPI: bus type pnp registered Oct 18 07:52:20 localhost kernel: [ 1.454542] pnp 00:00: [bus 00-3e] Oct 18 07:52:20 localhost kernel: [ 1.454545] pnp 00:00: [io 0x0000-0x0cf7 window] Oct 18 07:52:20 localhost kernel: [ 1.454547] pnp 00:00: [io 0x0cf8-0x0cff] Oct 18 07:52:20 localhost kernel: [ 1.454550] pnp 00:00: [io 0x0d00-0xffff window] Oct 18 07:52:20 localhost kernel: [ 1.454552] pnp 00:00: [mem 0x000a0000-0x000bffff window] Oct 18 07:52:20 localhost kernel: [ 1.454554] pnp 00:00: [mem 0x000c0000-0x000c3fff window] Oct 18 07:52:20 localhost kernel: [ 1.454556] pnp 00:00: [mem 0x000c4000-0x000c7fff window] Oct 18 07:52:20 localhost kernel: [ 1.454559] pnp 00:00: [mem 0x000c8000-0x000cbfff window] Oct 18 07:52:20 localhost kernel: [ 1.454561] pnp 00:00: [mem 0x000cc000-0x000cffff window] Oct 18 07:52:20 localhost kernel: [ 1.454563] pnp 00:00: [mem 0x000d0000-0x000d3fff window] Oct 18 07:52:20 localhost kernel: [ 1.454565] pnp 00:00: [mem 0x000d4000-0x000d7fff window] Oct 18 07:52:20 localhost kernel: [ 1.454567] pnp 00:00: [mem 0x000d8000-0x000dbfff window] Oct 18 07:52:20 localhost kernel: [ 1.454569] pnp 00:00: [mem 0x000dc000-0x000dffff window] Oct 18 07:52:20 localhost kernel: [ 1.454571] pnp 00:00: [mem 0x000e0000-0x000e3fff window] Oct 18 07:52:20 localhost kernel: [ 1.454573] pnp 00:00: [mem 0x000e4000-0x000e7fff window] Oct 18 07:52:20 localhost kernel: [ 1.454576] pnp 00:00: [mem 0x000e8000-0x000ebfff window] Oct 18 07:52:20 localhost kernel: [ 1.454578] pnp 00:00: [mem 0x000ec000-0x000effff window] Oct 18 07:52:20 localhost kernel: [ 1.454580] pnp 00:00: [mem 0x000f0000-0x000fffff window] Oct 18 07:52:20 localhost kernel: [ 1.454582] pnp 00:00: [mem 0xafa00000-0xfeafffff window] Oct 18 07:52:20 localhost kernel: [ 1.454584] pnp 00:00: [mem 0xfed40000-0xfed44fff window] Oct 18 07:52:20 localhost kernel: [ 1.454731] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) Oct 18 07:52:20 localhost kernel: [ 1.454755] pnp 00:01: [io 0x0000-0x001f] Oct 18 07:52:20 localhost kernel: [ 1.454757] pnp 00:01: [io 0x0081-0x0091] Oct 18 07:52:20 localhost kernel: [ 1.454761] pnp 00:01: [io 0x0093-0x009f] Oct 18 07:52:20 localhost kernel: [ 1.454764] pnp 00:01: [io 0x00c0-0x00df] Oct 18 07:52:20 localhost kernel: [ 1.454766] pnp 00:01: [dma 4] Oct 18 07:52:20 localhost kernel: [ 1.454859] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) Oct 18 07:52:20 localhost kernel: [ 1.454872] pnp 00:02: [mem 0xff000000-0xffffffff] Oct 18 07:52:20 localhost kernel: [ 1.454960] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) Oct 18 07:52:20 localhost kernel: [ 1.455067] pnp 00:03: [mem 0xfed00000-0xfed003ff] Oct 18 07:52:20 localhost kernel: [ 1.455159] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) Oct 18 07:52:20 localhost kernel: [ 1.455192] pnp 00:04: [io 0x00f0] Oct 18 07:52:20 localhost kernel: [ 1.455205] pnp 00:04: [irq 13] Oct 18 07:52:20 localhost kernel: [ 1.455303] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) Oct 18 07:52:20 localhost kernel: [ 1.455319] pnp 00:05: [io 0x002e-0x002f] Oct 18 07:52:20 localhost kernel: [ 1.455321] pnp 00:05: [io 0x004e-0x004f] Oct 18 07:52:20 localhost kernel: [ 1.455323] pnp 00:05: [io 0x0061] Oct 18 07:52:20 localhost kernel: [ 1.455325] pnp 00:05: [io 0x0063] Oct 18 07:52:20 localhost kernel: [ 1.455327] pnp 00:05: [io 0x0065] Oct 18 07:52:20 localhost kernel: [ 1.455329] pnp 00:05: [io 0x0067] Oct 18 07:52:20 localhost kernel: [ 1.455330] pnp 00:05: [io 0x0070] Oct 18 07:52:20 localhost kernel: [ 1.455332] pnp 00:05: [io 0x0080] Oct 18 07:52:20 localhost kernel: [ 1.455334] pnp 00:05: [io 0x0092] Oct 18 07:52:20 localhost kernel: [ 1.455336] pnp 00:05: [io 0x00b2-0x00b3] Oct 18 07:52:20 localhost kernel: [ 1.455338] pnp 00:05: [io 0x0680-0x069f] Oct 18 07:52:20 localhost kernel: [ 1.455340] pnp 00:05: [io 0x1000-0x100f] Oct 18 07:52:20 localhost kernel: [ 1.455342] pnp 00:05: [io 0xffff] Oct 18 07:52:20 localhost kernel: [ 1.455344] pnp 00:05: [io 0xffff] Oct 18 07:52:20 localhost kernel: [ 1.455346] pnp 00:05: [io 0x0400-0x0453] Oct 18 07:52:20 localhost kernel: [ 1.455348] pnp 00:05: [io 0x0458-0x047f] Oct 18 07:52:20 localhost kernel: [ 1.455350] pnp 00:05: [io 0x0500-0x057f] Oct 18 07:52:20 localhost kernel: [ 1.455352] pnp 00:05: [io 0x164e-0x164f] Oct 18 07:52:20 localhost kernel: [ 1.455474] system 00:05: [io 0x0680-0x069f] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.455537] system 00:05: [io 0x1000-0x100f] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.455600] system 00:05: [io 0xffff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.455661] system 00:05: [io 0xffff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.455721] system 00:05: [io 0x0400-0x0453] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.455783] system 00:05: [io 0x0458-0x047f] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.455845] system 00:05: [io 0x0500-0x057f] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.455907] system 00:05: [io 0x164e-0x164f] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.455973] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 18 07:52:20 localhost kernel: [ 1.455987] pnp 00:06: [io 0x0070-0x0077] Oct 18 07:52:20 localhost kernel: [ 1.455996] pnp 00:06: [irq 8] Oct 18 07:52:20 localhost kernel: [ 1.456086] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) Oct 18 07:52:20 localhost kernel: [ 1.456123] pnp 00:07: [io 0x0454-0x0457] Oct 18 07:52:20 localhost kernel: [ 1.456228] system 00:07: [io 0x0454-0x0457] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.456294] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) Oct 18 07:52:20 localhost kernel: [ 1.456364] pnp 00:08: [irq 12] Oct 18 07:52:20 localhost kernel: [ 1.456460] pnp 00:08: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) Oct 18 07:52:20 localhost kernel: [ 1.456492] pnp 00:09: [io 0x0060] Oct 18 07:52:20 localhost kernel: [ 1.456494] pnp 00:09: [io 0x0064] Oct 18 07:52:20 localhost kernel: [ 1.456502] pnp 00:09: [irq 1] Oct 18 07:52:20 localhost kernel: [ 1.456593] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) Oct 18 07:52:20 localhost kernel: [ 1.505513] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] Oct 18 07:52:20 localhost kernel: [ 1.505516] pnp 00:0a: [mem 0xfed10000-0xfed17fff] Oct 18 07:52:20 localhost kernel: [ 1.505518] pnp 00:0a: [mem 0xfed18000-0xfed18fff] Oct 18 07:52:20 localhost kernel: [ 1.505520] pnp 00:0a: [mem 0xfed19000-0xfed19fff] Oct 18 07:52:20 localhost kernel: [ 1.505522] pnp 00:0a: [mem 0xe0000000-0xe3ffffff] Oct 18 07:52:20 localhost kernel: [ 1.505524] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] Oct 18 07:52:20 localhost kernel: [ 1.505526] pnp 00:0a: [mem 0xfed90000-0xfed93fff] Oct 18 07:52:20 localhost kernel: [ 1.505529] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] Oct 18 07:52:20 localhost kernel: [ 1.505533] pnp 00:0a: [mem 0xff000000-0xffffffff] Oct 18 07:52:20 localhost kernel: [ 1.505535] pnp 00:0a: [mem 0xfee00000-0xfeefffff] Oct 18 07:52:20 localhost kernel: [ 1.505537] pnp 00:0a: [mem 0xafa00000-0xafa00fff] Oct 18 07:52:20 localhost kernel: [ 1.505684] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.505764] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved Oct 18 07:52:20 localhost kernel: [ 1.505828] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.505892] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.505955] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.506019] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.506082] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.506145] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.506209] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved Oct 18 07:52:20 localhost kernel: [ 1.506273] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved Oct 18 07:52:20 localhost kernel: [ 1.506337] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.506403] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 18 07:52:20 localhost kernel: [ 1.506449] pnp 00:0b: [mem 0xafa00000-0xafa00fff] Oct 18 07:52:20 localhost kernel: [ 1.506586] system 00:0b: [mem 0xafa00000-0xafa00fff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.506653] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 18 07:52:20 localhost kernel: [ 1.506852] pnp 00:0c: [mem 0x20000000-0x201fffff] Oct 18 07:52:20 localhost kernel: [ 1.506855] pnp 00:0c: [mem 0x40000000-0x401fffff] Oct 18 07:52:20 localhost kernel: [ 1.506987] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.507052] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved Oct 18 07:52:20 localhost kernel: [ 1.507618] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 18 07:52:20 localhost kernel: [ 1.507636] pnp: PnP ACPI: found 13 devices Oct 18 07:52:20 localhost kernel: [ 1.507695] ACPI: ACPI bus type pnp unregistered Oct 18 07:52:20 localhost kernel: [ 1.521061] pci 0000:00:01.0: PCI bridge to [bus 01] Oct 18 07:52:20 localhost kernel: [ 1.521125] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] Oct 18 07:52:20 localhost kernel: [ 1.521190] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff] Oct 18 07:52:20 localhost kernel: [ 1.521256] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.521336] pci 0000:00:1c.0: PCI bridge to [bus 02] Oct 18 07:52:20 localhost kernel: [ 1.521399] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] Oct 18 07:52:20 localhost kernel: [ 1.521467] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff] Oct 18 07:52:20 localhost kernel: [ 1.521534] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.521619] pci 0000:00:1c.1: PCI bridge to [bus 03] Oct 18 07:52:20 localhost kernel: [ 1.521681] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] Oct 18 07:52:20 localhost kernel: [ 1.521748] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff] Oct 18 07:52:20 localhost kernel: [ 1.521828] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.521914] pci 0000:00:1c.3: PCI bridge to [bus 04] Oct 18 07:52:20 localhost kernel: [ 1.521975] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff] Oct 18 07:52:20 localhost kernel: [ 1.522043] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff] Oct 18 07:52:20 localhost kernel: [ 1.522110] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.522195] pci 0000:00:1c.5: PCI bridge to [bus 05] Oct 18 07:52:20 localhost kernel: [ 1.522257] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff] Oct 18 07:52:20 localhost kernel: [ 1.522325] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff] Oct 18 07:52:20 localhost kernel: [ 1.522391] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.522532] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] Oct 18 07:52:20 localhost kernel: [ 1.522534] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] Oct 18 07:52:20 localhost kernel: [ 1.522536] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] Oct 18 07:52:20 localhost kernel: [ 1.522539] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] Oct 18 07:52:20 localhost kernel: [ 1.522541] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] Oct 18 07:52:20 localhost kernel: [ 1.522543] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] Oct 18 07:52:20 localhost kernel: [ 1.522545] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] Oct 18 07:52:20 localhost kernel: [ 1.522547] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] Oct 18 07:52:20 localhost kernel: [ 1.522549] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] Oct 18 07:52:20 localhost kernel: [ 1.522551] pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff] Oct 18 07:52:20 localhost kernel: [ 1.522553] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff] Oct 18 07:52:20 localhost kernel: [ 1.522556] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] Oct 18 07:52:20 localhost kernel: [ 1.522558] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff] Oct 18 07:52:20 localhost kernel: [ 1.522560] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.522562] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] Oct 18 07:52:20 localhost kernel: [ 1.522564] pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff] Oct 18 07:52:20 localhost kernel: [ 1.522567] pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.522569] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] Oct 18 07:52:20 localhost kernel: [ 1.522571] pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff] Oct 18 07:52:20 localhost kernel: [ 1.522573] pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.522575] pci_bus 0000:04: resource 0 [io 0xa000-0xafff] Oct 18 07:52:20 localhost kernel: [ 1.522578] pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff] Oct 18 07:52:20 localhost kernel: [ 1.522580] pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.522582] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff] Oct 18 07:52:20 localhost kernel: [ 1.522584] pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff] Oct 18 07:52:20 localhost kernel: [ 1.522586] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref] Oct 18 07:52:20 localhost kernel: [ 1.522655] NET: Registered protocol family 2 Oct 18 07:52:20 localhost kernel: [ 1.523812] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Oct 18 07:52:20 localhost kernel: [ 1.525614] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) Oct 18 07:52:20 localhost kernel: [ 1.530392] TCP: Hash tables configured (established 524288 bind 65536) Oct 18 07:52:20 localhost kernel: [ 1.530508] TCP: reno registered Oct 18 07:52:20 localhost kernel: [ 1.530686] UDP hash table entries: 8192 (order: 8, 1310720 bytes) Oct 18 07:52:20 localhost kernel: [ 1.532094] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes) Oct 18 07:52:20 localhost kernel: [ 1.533552] NET: Registered protocol family 1 Oct 18 07:52:20 localhost kernel: [ 1.533631] pci 0000:00:02.0: Boot video device Oct 18 07:52:20 localhost kernel: [ 1.781958] PCI: CLS 64 bytes, default 64 Oct 18 07:52:20 localhost kernel: [ 1.782127] Trying to unpack rootfs image as initramfs... Oct 18 07:52:20 localhost kernel: [ 1.901238] Freeing initrd memory: 5912k freed Oct 18 07:52:20 localhost kernel: [ 1.902272] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Oct 18 07:52:20 localhost kernel: [ 1.902340] software IO TLB [mem 0xa6bd1000-0xaabd0fff] (64MB) mapped at [ffff8800a6bd1000-ffff8800aabd0fff] Oct 18 07:52:20 localhost kernel: [ 1.903880] audit: initializing netlink socket (disabled) Oct 18 07:52:20 localhost kernel: [ 1.903998] type=2000 audit(1350539501.656:1): initialized Oct 18 07:52:20 localhost kernel: [ 1.938514] HugeTLB registered 2 MB page size, pre-allocated 0 pages Oct 18 07:52:20 localhost kernel: [ 1.947111] VFS: Disk quotas dquot_6.5.2 Oct 18 07:52:20 localhost kernel: [ 1.947318] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 18 07:52:20 localhost kernel: [ 1.947799] ROMFS MTD (C) 2007 Red Hat, Inc. Oct 18 07:52:20 localhost kernel: [ 1.947966] msgmni has been set to 23840 Oct 18 07:52:20 localhost kernel: [ 1.948925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Oct 18 07:52:20 localhost kernel: [ 1.949101] io scheduler noop registered Oct 18 07:52:20 localhost kernel: [ 1.949159] io scheduler deadline registered Oct 18 07:52:20 localhost kernel: [ 1.949427] io scheduler cfq registered (default) Oct 18 07:52:20 localhost kernel: [ 1.952293] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X Oct 18 07:52:20 localhost kernel: [ 1.953308] intel_idle: MWAIT substates: 0x21120 Oct 18 07:52:20 localhost kernel: [ 1.953311] intel_idle: v0.4 model 0x2A Oct 18 07:52:20 localhost kernel: [ 1.953312] intel_idle: lapic_timer_reliable_states 0xffffffff Oct 18 07:52:20 localhost kernel: [ 1.953500] GHES: HEST is not enabled! Oct 18 07:52:20 localhost kernel: [ 2.007889] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Oct 18 07:52:20 localhost kernel: [ 2.009549] Linux agpgart interface v0.103 Oct 18 07:52:20 localhost kernel: [ 2.014630] brd: module loaded Oct 18 07:52:20 localhost kernel: [ 2.014926] libphy: Fixed MDIO Bus: probed Oct 18 07:52:20 localhost kernel: [ 2.015241] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Oct 18 07:52:20 localhost kernel: [ 2.016943] i8042: Detected active multiplexing controller, rev 1.1 Oct 18 07:52:20 localhost kernel: [ 2.017809] serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 18 07:52:20 localhost kernel: [ 2.017934] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Oct 18 07:52:20 localhost kernel: [ 2.018012] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Oct 18 07:52:20 localhost kernel: [ 2.018284] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Oct 18 07:52:20 localhost kernel: [ 2.018469] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Oct 18 07:52:20 localhost kernel: [ 2.019008] mousedev: PS/2 mouse device common for all mice Oct 18 07:52:20 localhost kernel: [ 2.019192] rtc_cmos 00:06: RTC can wake from S4 Oct 18 07:52:20 localhost kernel: [ 2.019657] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 Oct 18 07:52:20 localhost kernel: [ 2.019758] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs Oct 18 07:52:20 localhost kernel: [ 2.020281] cpuidle: using governor ladder Oct 18 07:52:20 localhost kernel: [ 2.021188] cpuidle: using governor menu Oct 18 07:52:20 localhost kernel: [ 2.021318] ledtrig-cpu: registered to indicate activity on CPUs Oct 18 07:52:20 localhost kernel: [ 2.022015] drop_monitor: Initializing network drop monitor service Oct 18 07:52:20 localhost kernel: [ 2.022304] TCP: cubic registered Oct 18 07:52:20 localhost kernel: [ 2.023528] NET: Registered protocol family 10 Oct 18 07:52:20 localhost kernel: [ 2.024116] mip6: Mobile IPv6 Oct 18 07:52:20 localhost kernel: [ 2.024176] NET: Registered protocol family 17 Oct 18 07:52:20 localhost kernel: [ 2.024579] Key type dns_resolver registered Oct 18 07:52:20 localhost kernel: [ 2.027443] registered taskstats version 1 Oct 18 07:52:20 localhost kernel: [ 2.028752] rtc_cmos 00:06: setting system clock to 2012-10-18 05:51:42 UTC (1350539502) Oct 18 07:52:20 localhost kernel: [ 2.031018] Freeing unused kernel memory: 656k freed Oct 18 07:52:20 localhost kernel: [ 2.031171] Write protecting the kernel read-only data: 8192k Oct 18 07:52:20 localhost kernel: [ 2.034893] Freeing unused kernel memory: 1256k freed Oct 18 07:52:20 localhost kernel: [ 2.035803] Freeing unused kernel memory: 172k freed Oct 18 07:52:20 localhost kernel: [ 2.043148] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 Oct 18 07:52:20 localhost kernel: [ 2.054442] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 Oct 18 07:52:20 localhost kernel: [ 2.054713] ACPI: Lid Switch [LID] Oct 18 07:52:20 localhost kernel: [ 2.054966] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 Oct 18 07:52:20 localhost kernel: [ 2.055073] ACPI: Sleep Button [SLPB] Oct 18 07:52:20 localhost kernel: [ 2.055354] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Oct 18 07:52:20 localhost kernel: [ 2.055456] ACPI: Power Button [PWRF] Oct 18 07:52:20 localhost kernel: [ 2.060739] [drm] Initialized drm 1.1.0 20060810 Oct 18 07:52:20 localhost kernel: [ 2.066383] pci 0000:00:00.0: Intel Sandybridge Chipset Oct 18 07:52:20 localhost kernel: [ 2.066636] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable Oct 18 07:52:20 localhost kernel: [ 2.068408] pci 0000:00:00.0: detected 65536K stolen memory Oct 18 07:52:20 localhost kernel: [ 2.068679] i915 0000:00:02.0: setting latency timer to 64 Oct 18 07:52:20 localhost kernel: [ 2.149519] i915 0000:00:02.0: irq 41 for MSI/MSI-X Oct 18 07:52:20 localhost kernel: [ 2.149536] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Oct 18 07:52:20 localhost kernel: [ 2.149600] [drm] Driver supports precise vblank timestamp query. Oct 18 07:52:20 localhost kernel: [ 2.150003] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem Oct 18 07:52:20 localhost kernel: [ 2.150084] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 Oct 18 07:52:20 localhost kernel: [ 2.321225] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off Oct 18 07:52:20 localhost kernel: [ 2.447956] fbcon: inteldrmfb (fb0) is primary device Oct 18 07:52:20 localhost kernel: [ 2.904858] tsc: Refined TSC clocksource calibration: 1995.466 MHz Oct 18 07:52:20 localhost kernel: [ 2.904901] Switching to clocksource tsc Oct 18 07:52:20 localhost kernel: [ 3.191903] Console: switching to colour frame buffer device 200x56 Oct 18 07:52:20 localhost kernel: [ 3.195656] fb0: inteldrmfb frame buffer device Oct 18 07:52:20 localhost kernel: [ 3.195679] drm: registered panic notifier Oct 18 07:52:20 localhost kernel: [ 3.201907] ACPI Warning: _BQC returned an invalid level (20120913/video-472) Oct 18 07:52:20 localhost kernel: [ 3.203141] acpi device:4f: registered as cooling_device0 Oct 18 07:52:20 localhost kernel: [ 3.203228] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) Oct 18 07:52:20 localhost kernel: [ 3.203604] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input4 Oct 18 07:52:20 localhost kernel: [ 3.206940] ACPI Warning: _BQC returned an invalid level (20120913/video-472) Oct 18 07:52:20 localhost kernel: [ 3.207827] acpi device:51: registered as cooling_device1 Oct 18 07:52:20 localhost kernel: [ 3.208204] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Oct 18 07:52:20 localhost kernel: [ 3.208489] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5 Oct 18 07:52:20 localhost kernel: [ 3.208720] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Oct 18 07:52:20 localhost kernel: [ 3.211575] SCSI subsystem initialized Oct 18 07:52:20 localhost kernel: [ 3.213425] ACPI: bus type scsi registered Oct 18 07:52:20 localhost kernel: [ 3.213685] libata version 3.00 loaded. Oct 18 07:52:20 localhost kernel: [ 3.215533] ahci 0000:00:1f.2: version 3.0 Oct 18 07:52:20 localhost kernel: [ 3.215621] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X Oct 18 07:52:20 localhost kernel: [ 3.228064] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode Oct 18 07:52:20 localhost kernel: [ 3.228120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst Oct 18 07:52:20 localhost kernel: [ 3.228162] ahci 0000:00:1f.2: setting latency timer to 64 Oct 18 07:52:20 localhost kernel: [ 3.244419] scsi0 : ahci Oct 18 07:52:20 localhost kernel: [ 3.244865] scsi1 : ahci Oct 18 07:52:20 localhost kernel: [ 3.245091] scsi2 : ahci Oct 18 07:52:20 localhost kernel: [ 3.245312] scsi3 : ahci Oct 18 07:52:20 localhost kernel: [ 3.245537] scsi4 : ahci Oct 18 07:52:20 localhost kernel: [ 3.245759] scsi5 : ahci Oct 18 07:52:20 localhost kernel: [ 3.245950] ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 42 Oct 18 07:52:20 localhost kernel: [ 3.245987] ata2: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006180 irq 42 Oct 18 07:52:20 localhost kernel: [ 3.246023] ata3: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006200 irq 42 Oct 18 07:52:20 localhost kernel: [ 3.246057] ata4: DUMMY Oct 18 07:52:20 localhost kernel: [ 3.246071] ata5: DUMMY Oct 18 07:52:20 localhost kernel: [ 3.246084] ata6: DUMMY Oct 18 07:52:20 localhost kernel: [ 3.564651] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 18 07:52:20 localhost kernel: [ 3.569144] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded Oct 18 07:52:20 localhost kernel: [ 3.569157] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out Oct 18 07:52:20 localhost kernel: [ 3.570458] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out Oct 18 07:52:20 localhost kernel: [ 3.571798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 18 07:52:20 localhost kernel: [ 3.573127] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 18 07:52:20 localhost kernel: [ 3.574431] ata3.00: ATAPI: HL-DT-STDVDRAM GT34N, AS00, max UDMA/100 Oct 18 07:52:20 localhost kernel: [ 3.577100] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded Oct 18 07:52:20 localhost kernel: [ 3.577105] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out Oct 18 07:52:20 localhost kernel: [ 3.578392] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out Oct 18 07:52:20 localhost kernel: [ 3.579696] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded Oct 18 07:52:20 localhost kernel: [ 3.579701] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out Oct 18 07:52:20 localhost kernel: [ 3.580968] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out Oct 18 07:52:20 localhost kernel: [ 3.583302] ata1.00: ATA-8: WDC WD5000BEVT-80A0RT0, 01.01A01, max UDMA/133 Oct 18 07:52:20 localhost kernel: [ 3.584616] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Oct 18 07:52:20 localhost kernel: [ 3.586002] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded Oct 18 07:52:20 localhost kernel: [ 3.586007] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out Oct 18 07:52:20 localhost kernel: [ 3.587298] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out Oct 18 07:52:20 localhost kernel: [ 3.588643] ata1.00: failed to get Identify Device Data, Emask 0x1 Oct 18 07:52:20 localhost kernel: [ 3.588927] ata2.00: ATA-8: WDC WD5000BEVT-80A0RT0, 01.01A01, max UDMA/133 Oct 18 07:52:20 localhost kernel: [ 3.590236] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Oct 18 07:52:20 localhost kernel: [ 3.591594] ata3.00: configured for UDMA/100 Oct 18 07:52:20 localhost kernel: [ 3.593538] ata2.00: failed to get Identify Device Data, Emask 0x1 Oct 18 07:52:20 localhost kernel: [ 3.593696] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded Oct 18 07:52:20 localhost kernel: [ 3.593700] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out Oct 18 07:52:20 localhost kernel: [ 3.595023] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out Oct 18 07:52:20 localhost kernel: [ 3.599128] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded Oct 18 07:52:20 localhost kernel: [ 3.599134] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out Oct 18 07:52:20 localhost kernel: [ 3.600449] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out Oct 18 07:52:20 localhost kernel: [ 3.601807] ata1.00: failed to get Identify Device Data, Emask 0x1 Oct 18 07:52:20 localhost kernel: [ 3.601814] ata1.00: configured for UDMA/133 Oct 18 07:52:20 localhost kernel: [ 3.604239] ata2.00: failed to get Identify Device Data, Emask 0x1 Oct 18 07:52:20 localhost kernel: [ 3.604252] ata2.00: configured for UDMA/133 Oct 18 07:52:20 localhost kernel: [ 3.608631] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-8 01.0 PQ: 0 ANSI: 5 Oct 18 07:52:20 localhost kernel: [ 3.612482] scsi 1:0:0:0: Direct-Access ATA WDC WD5000BEVT-8 01.0 PQ: 0 ANSI: 5 Oct 18 07:52:20 localhost kernel: [ 3.612071] ACPI: Invalid Power Resource to register! Oct 18 07:52:20 localhost kernel: [ 3.615333] ACPI: Invalid Power Resource to register!<5>[ 3.617361] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT34N AS00 PQ: 0 ANSI: 5 Oct 18 07:52:20 localhost kernel: [ 3.623329] md: raid10 personality registered for level 10 Oct 18 07:52:20 localhost kernel: [ 3.626732] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) Oct 18 07:52:20 localhost kernel: [ 3.626767] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) Oct 18 07:52:20 localhost kernel: [ 3.626890] sd 1:0:0:0: [sdb] Write Protect is off Oct 18 07:52:20 localhost kernel: [ 3.626893] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Oct 18 07:52:20 localhost kernel: [ 3.626938] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 18 07:52:20 localhost kernel: [ 3.631899] sd 0:0:0:0: [sda] Write Protect is off Oct 18 07:52:20 localhost kernel: [ 3.633156] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 18 07:52:20 localhost kernel: [ 3.633188] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 18 07:52:20 localhost kernel: [ 3.657899] sdb: sdb1 sdb2 Oct 18 07:52:20 localhost kernel: [ 3.660765] sd 1:0:0:0: [sdb] Attached SCSI disk Oct 18 07:52:20 localhost kernel: [ 3.670822] sda: sda1 sda2 Oct 18 07:52:20 localhost kernel: [ 3.673155] sd 0:0:0:0: [sda] Attached SCSI disk Oct 18 07:52:20 localhost kernel: [ 3.676438] device-mapper: uevent: version 1.0.3 Oct 18 07:52:20 localhost kernel: [ 3.678187] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected] Oct 18 07:52:20 localhost kernel: [ 3.948957] md: md1 stopped. Oct 18 07:52:20 localhost kernel: [ 3.952235] md: bind<sdb2> Oct 18 07:52:20 localhost kernel: [ 3.953777] md: bind<sda2> Oct 18 07:52:20 localhost kernel: [ 3.955684] md/raid10:md1: active with 2 out of 2 devices Oct 18 07:52:20 localhost kernel: [ 3.956948] md1: detected capacity change from 0 to 499596132352 Oct 18 07:52:20 localhost kernel: [ 3.985753] md1: unknown partition table Oct 18 07:52:20 localhost kernel: [ 4.039180] bio: create slab <bio-1> at 1 Oct 18 07:52:20 localhost kernel: [ 4.265948] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) Oct 18 07:52:20 localhost kernel: [ 6.786776] thermal LNXTHERM:00: registered as thermal_zone0 Oct 18 07:52:20 localhost kernel: [ 6.786780] ACPI: Thermal Zone [TZ00] (40 C) Oct 18 07:52:20 localhost kernel: [ 6.855492] ACPI: Requesting acpi_cpufreq Oct 18 07:52:20 localhost kernel: [ 6.860382] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 18 07:52:20 localhost kernel: [ 6.860399] ACPI: Battery Slot [BAT0] (battery present) Oct 18 07:52:20 localhost kernel: [ 6.861819] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Oct 18 07:52:20 localhost kernel: [ 6.862049] ACPI: AC Adapter [AC0] (on-line) Oct 18 07:52:20 localhost kernel: [ 6.930343] wmi: Mapper loaded Oct 18 07:52:20 localhost kernel: [ 6.931725] mei 0000:00:16.0: setting latency timer to 64 Oct 18 07:52:20 localhost kernel: [ 6.931889] mei 0000:00:16.0: irq 43 for MSI/MSI-X Oct 18 07:52:20 localhost kernel: [ 6.944949] mei 0000:00:16.0: wd: failed to find the client Oct 18 07:52:20 localhost kernel: [ 6.979204] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 Oct 18 07:52:20 localhost kernel: [ 7.132518] ACPI: bus type usb registered Oct 18 07:52:20 localhost kernel: [ 7.132598] usbcore: registered new interface driver usbfs Oct 18 07:52:20 localhost kernel: [ 7.132705] usbcore: registered new interface driver hub Oct 18 07:52:20 localhost kernel: [ 7.132809] usbcore: registered new device driver usb Oct 18 07:52:20 localhost kernel: [ 7.167872] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 Oct 18 07:52:20 localhost kernel: [ 7.168855] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 Oct 18 07:52:20 localhost kernel: [ 7.169461] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 Oct 18 07:52:20 localhost kernel: [ 7.170059] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x14 Oct 18 07:52:20 localhost kernel: [ 7.170783] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x14 Oct 18 07:52:20 localhost kernel: [ 7.171441] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x14 Oct 18 07:52:20 localhost kernel: [ 7.171964] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x14 Oct 18 07:52:20 localhost kernel: [ 7.172684] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba Oct 18 07:52:20 localhost kernel: [ 7.221330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 18 07:52:20 localhost kernel: [ 7.221432] ehci_hcd 0000:00:1a.0: setting latency timer to 64 Oct 18 07:52:20 localhost kernel: [ 7.221437] ehci_hcd 0000:00:1a.0: EHCI Host Controller Oct 18 07:52:20 localhost kernel: [ 7.221626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 Oct 18 07:52:20 localhost kernel: [ 7.225149] atl1c 0000:05:00.0: version 1.0.1.0-NAPI Oct 18 07:52:20 localhost kernel: [ 7.225610] ehci_hcd 0000:00:1a.0: debug port 2 Oct 18 07:52:20 localhost kernel: [ 7.225621] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported Oct 18 07:52:20 localhost kernel: [ 7.225652] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000 Oct 18 07:52:20 localhost kernel: [ 7.233381] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 Oct 18 07:52:20 localhost kernel: [ 7.233588] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Oct 18 07:52:20 localhost kernel: [ 7.233591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 18 07:52:20 localhost kernel: [ 7.233593] usb usb1: Product: EHCI Host Controller Oct 18 07:52:20 localhost kernel: [ 7.233595] usb usb1: Manufacturer: Linux 3.7.0-rc1-00078-g8d2b6b3 ehci_hcd Oct 18 07:52:20 localhost kernel: [ 7.233597] usb usb1: SerialNumber: 0000:00:1a.0 Oct 18 07:52:20 localhost kernel: [ 7.234443] hub 1-0:1.0: USB hub found Oct 18 07:52:20 localhost kernel: [ 7.234522] hub 1-0:1.0: 2 ports detected Oct 18 07:52:20 localhost kernel: [ 7.235224] ehci_hcd 0000:00:1d.0: setting latency timer to 64 Oct 18 07:52:20 localhost kernel: [ 7.235229] ehci_hcd 0000:00:1d.0: EHCI Host Controller Oct 18 07:52:20 localhost kernel: [ 7.235239] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Oct 18 07:52:20 localhost kernel: [ 7.239154] ehci_hcd 0000:00:1d.0: debug port 2 Oct 18 07:52:20 localhost kernel: [ 7.239165] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported Oct 18 07:52:20 localhost kernel: [ 7.239191] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000 Oct 18 07:52:20 localhost kernel: [ 7.246697] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 Oct 18 07:52:20 localhost kernel: [ 7.246792] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Oct 18 07:52:20 localhost kernel: [ 7.246795] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 18 07:52:20 localhost kernel: [ 7.246797] usb usb2: Product: EHCI Host Controller Oct 18 07:52:20 localhost kernel: [ 7.246799] usb usb2: Manufacturer: Linux 3.7.0-rc1-00078-g8d2b6b3 ehci_hcd Oct 18 07:52:20 localhost kernel: [ 7.246801] usb usb2: SerialNumber: 0000:00:1d.0 Oct 18 07:52:20 localhost kernel: [ 7.247126] hub 2-0:1.0: USB hub found Oct 18 07:52:20 localhost kernel: [ 7.247139] hub 2-0:1.0: 2 ports detected Oct 18 07:52:20 localhost kernel: [ 7.394788] input: PC Speaker as /devices/platform/pcspkr/input/input6 Oct 18 07:52:20 localhost kernel: [ 3.620421] ACPI: Invalid Power Resource to register! Oct 18 07:52:20 localhost kernel: [ 7.439313] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251) Oct 18 07:52:20 localhost kernel: [ 7.439322] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Oct 18 07:52:20 localhost kernel: [ 7.439327] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SBGP 1 (20120913/utaddress-251) Oct 18 07:52:20 localhost kernel: [ 7.439331] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 2 (20120913/utaddress-251) Oct 18 07:52:20 localhost kernel: [ 7.439336] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Oct 18 07:52:20 localhost kernel: [ 7.439337] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SBGP 1 (20120913/utaddress-251) Oct 18 07:52:20 localhost kernel: [ 7.439341] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20120913/utaddress-251) Oct 18 07:52:20 localhost kernel: [ 7.439345] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Oct 18 07:52:20 localhost kernel: [ 7.439347] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SBGP 1 (20120913/utaddress-251) Oct 18 07:52:20 localhost kernel: [ 7.439351] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20120913/utaddress-251) Oct 18 07:52:20 localhost kernel: [ 7.439355] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Oct 18 07:52:20 localhost kernel: [ 7.439356] lpc_ich: Resource conflict(s) found affecting gpio_ich Oct 18 07:52:20 localhost kernel: [ 7.539975] usb 1-1: new high-speed USB device number 2 using ehci_hcd Oct 18 07:52:20 localhost kernel: [ 7.592556] xhci_hcd 0000:04:00.0: xHCI Host Controller Oct 18 07:52:20 localhost kernel: [ 7.592573] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 Oct 18 07:52:20 localhost kernel: [ 7.663594] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 Oct 18 07:52:20 localhost kernel: [ 7.663598] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 18 07:52:20 localhost kernel: [ 7.664278] hub 1-1:1.0: USB hub found Oct 18 07:52:20 localhost kernel: [ 7.664451] hub 1-1:1.0: 6 ports detected Oct 18 07:52:20 localhost kernel: [ 7.728424] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000 Oct 18 07:52:20 localhost kernel: [ 7.728486] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 Oct 18 07:52:20 localhost kernel: [ 7.728489] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 18 07:52:20 localhost kernel: [ 7.728491] usb usb3: Product: xHCI Host Controller Oct 18 07:52:20 localhost kernel: [ 7.728493] usb usb3: Manufacturer: Linux 3.7.0-rc1-00078-g8d2b6b3 xhci_hcd Oct 18 07:52:20 localhost kernel: [ 7.728495] usb usb3: SerialNumber: 0000:04:00.0 Oct 18 07:52:20 localhost kernel: [ 7.728735] xHCI xhci_add_endpoint called for root hub Oct 18 07:52:20 localhost kernel: [ 7.728738] xHCI xhci_check_bandwidth called for root hub Oct 18 07:52:20 localhost kernel: [ 7.728799] hub 3-0:1.0: USB hub found Oct 18 07:52:20 localhost kernel: [ 7.728863] hub 3-0:1.0: 1 port detected Oct 18 07:52:20 localhost kernel: [ 7.729025] xhci_hcd 0000:04:00.0: xHCI Host Controller Oct 18 07:52:20 localhost kernel: [ 7.729033] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 Oct 18 07:52:20 localhost kernel: [ 7.729098] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 Oct 18 07:52:20 localhost kernel: [ 7.729101] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 18 07:52:20 localhost kernel: [ 7.729103] usb usb4: Product: xHCI Host Controller Oct 18 07:52:20 localhost kernel: [ 7.729105] usb usb4: Manufacturer: Linux 3.7.0-rc1-00078-g8d2b6b3 xhci_hcd Oct 18 07:52:20 localhost kernel: [ 7.729107] usb usb4: SerialNumber: 0000:04:00.0 Oct 18 07:52:20 localhost kernel: [ 7.729361] xHCI xhci_add_endpoint called for root hub Oct 18 07:52:20 localhost kernel: [ 7.729364] xHCI xhci_check_bandwidth called for root hub Oct 18 07:52:20 localhost kernel: [ 7.729424] hub 4-0:1.0: USB hub found Oct 18 07:52:20 localhost kernel: [ 7.729440] hub 4-0:1.0: 1 port detected Oct 18 07:52:20 localhost kernel: [ 7.734687] ACPI Warning: 0x000000000000e040-0x000000000000e05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251) Oct 18 07:52:20 localhost kernel: [ 7.734695] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Oct 18 07:52:20 localhost kernel: [ 7.773219] usb 2-1: new high-speed USB device number 2 using ehci_hcd Oct 18 07:52:20 localhost kernel: [ 7.883748] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Oct 18 07:52:20 localhost kernel: [ 7.883757] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 18 07:52:20 localhost kernel: [ 7.884259] sr 2:0:0:0: Attached scsi CD-ROM sr0 Oct 18 07:52:20 localhost kernel: [ 7.896884] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 Oct 18 07:52:20 localhost kernel: [ 7.896894] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 18 07:52:20 localhost kernel: [ 7.897364] hub 2-1:1.0: USB hub found Oct 18 07:52:20 localhost kernel: [ 7.897482] hub 2-1:1.0: 6 ports detected Oct 18 07:52:20 localhost kernel: [ 7.966613] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd Oct 18 07:52:20 localhost kernel: [ 8.050595] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3304 Oct 18 07:52:20 localhost kernel: [ 8.050605] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 18 07:52:20 localhost kernel: [ 8.116581] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd Oct 18 07:52:20 localhost kernel: [ 8.155369] cfg80211: Calling CRDA to update world regulatory domain Oct 18 07:52:20 localhost kernel: [ 8.175962] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 18 07:52:20 localhost kernel: [ 8.190365] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X Oct 18 07:52:20 localhost kernel: [ 8.221687] asus_wmi: ASUS WMI generic driver loaded Oct 18 07:52:20 localhost kernel: [ 8.222584] asus_wmi: Initialization: 0x1asus_wmi: SFUN value: 0x1a0af7 Oct 18 07:52:20 localhost kernel: [ 8.223501] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7 Oct 18 07:52:20 localhost kernel: [ 8.229097] asus_wmi: Backlight controlled by ACPI video driver Oct 18 07:52:20 localhost kernel: [ 8.238356] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5122 Oct 18 07:52:20 localhost kernel: [ 8.238361] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 Oct 18 07:52:20 localhost kernel: [ 8.238364] usb 1-1.2: Product: USB2.0 UVC 2M WebCam Oct 18 07:52:20 localhost kernel: [ 8.238367] usb 1-1.2: Manufacturer: USB2.0 UVC 2M WebCam Oct 18 07:52:20 localhost kernel: [ 8.238369] usb 1-1.2: SerialNumber: USB2.0 UVC 2M WebCam Oct 18 07:52:20 localhost kernel: [ 8.309872] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd Oct 18 07:52:20 localhost kernel: [ 8.323596] iTCO_vendor_support: vendor-support=0 Oct 18 07:52:20 localhost kernel: [ 8.352047] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 Oct 18 07:52:20 localhost kernel: [ 8.352186] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 Oct 18 07:52:20 localhost kernel: [ 8.352283] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 Oct 18 07:52:20 localhost kernel: [ 8.398720] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c051 Oct 18 07:52:20 localhost kernel: [ 8.398732] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 18 07:52:20 localhost kernel: [ 8.398738] usb 2-1.2: Product: USB-PS/2 Optical Mouse Oct 18 07:52:20 localhost kernel: [ 8.398743] usb 2-1.2: Manufacturer: Logitech Oct 18 07:52:20 localhost kernel: [ 8.402605] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 Oct 18 07:52:20 localhost kernel: [ 8.402648] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) Oct 18 07:52:20 localhost kernel: [ 8.403205] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Oct 18 07:52:20 localhost kernel: [ 8.624068] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040201) Oct 18 07:52:20 localhost kernel: [ 8.653079] psmouse serio4: elantech: Synaptics capabilities query result 0x78, 0x14, 0x0b. Oct 18 07:52:20 localhost kernel: [ 8.758056] usbcore: registered new interface driver usbhid Oct 18 07:52:20 localhost kernel: [ 8.758059] usbhid: USB HID core driver Oct 18 07:52:20 localhost kernel: [ 8.761963] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11 Oct 18 07:52:20 localhost kernel: [ 8.763302] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12 Oct 18 07:52:20 localhost kernel: [ 8.764046] hid-generic 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0 Oct 18 07:52:20 localhost kernel: [ 8.783234] media: Linux media interface: v0.10 Oct 18 07:52:20 localhost kernel: [ 8.867742] MXM: GUID detected in BIOS Oct 18 07:52:20 localhost kernel: [ 8.867985] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGR.GFX0 handle Oct 18 07:52:20 localhost kernel: [ 8.868098] nouveau 0000:01:00.0: enabling device (0004 -> 0007) Oct 18 07:52:20 localhost kernel: [ 8.868782] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c1a00a1 Oct 18 07:52:20 localhost kernel: [ 8.868785] nouveau [ DEVICE][0000:01:00.0] Chipset: GF108 (NVC1) Oct 18 07:52:20 localhost kernel: [ 8.868787] nouveau [ DEVICE][0000:01:00.0] Family : NVC0 Oct 18 07:52:20 localhost kernel: [ 8.872044] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... Oct 18 07:52:20 localhost kernel: [ 8.881776] nouveau [ VBIOS][0000:01:00.0] ... signature not found Oct 18 07:52:20 localhost kernel: [ 8.881778] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... Oct 18 07:52:20 localhost kernel: [ 8.881836] nouveau [ VBIOS][0000:01:00.0] ... signature not found Oct 18 07:52:20 localhost kernel: [ 8.881838] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... Oct 18 07:52:20 localhost kernel: [ 8.881920] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) Oct 18 07:52:20 localhost kernel: [ 8.881926] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGR.GFX0._ROM] (Node ffff88033e47fe88), AE_AML_REGION_LIMIT (20120913/psparse-536) Oct 18 07:52:20 localhost kernel: [ 8.886284] failed to evaluate ROM got AE_AML_REGION_LIMIT Oct 18 07:52:20 localhost kernel: [ 8.886312] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 Oct 18 07:52:20 localhost kernel: [ 8.888373] IP: [<ffffffffa0630395>] nouveau_bios_score+0x15/0xd0 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.889399] PGD 33cb71067 PUD 33cb72067 PMD 0 Oct 18 07:52:20 localhost kernel: [ 8.890412] Oops: 0000 [#1] SMP Oct 18 07:52:20 localhost kernel: [ 8.891412] Modules linked in: ath9k_hw nouveau(+) media hid_generic usbhid videobuf2_vmalloc hid videobuf2_memops ath coretemp iTCO_wdt snd_hda_codec_hdmi iTCO_vendor_support ttm kvm_intel snd_hda_codec_realtek asus_nb_wmi asus_wmi acpi_cpufreq kvm sparse_keymap snd_hda_intel pci_hotplug snd_hda_codec cfg80211 psmouse sr_mod crc32c_intel snd_hwdep cdrom snd_pcm snd_timer i2c_i801 xhci_hcd hwmon mperf ghash_clmulni_intel snd lpc_ich rfkill serio_raw pcspkr cryptd ehci_hcd atl1c usbcore mxm_wmi soundcore usb_common microcode mei wmi snd_page_alloc evdev ac battery processor thermal ext4 mbcache jbd2 crc16 dm_mod sd_mod crc_t10dif raid10 md_mod ahci libahci libata scsi_mod i915 drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt button i2c_core video Oct 18 07:52:20 localhost kernel: [ 8.896104] CPU 1 Oct 18 07:52:20 localhost kernel: [ 8.896115] Pid: 2760, comm: udevd Not tainted 3.7.0-rc1-00078-g8d2b6b3 #24 ASUSTeK Computer Inc. N73SV/N73SV Oct 18 07:52:20 localhost kernel: [ 8.898586] RIP: 0010:[<ffffffffa0630395>] [<ffffffffa0630395>] nouveau_bios_score+0x15/0xd0 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.899934] RSP: 0018:ffff88033c065818 EFLAGS: 00010202 Oct 18 07:52:20 localhost kernel: [ 8.901189] RAX: 0000000000000010 RBX: ffff88033c861300 RCX: 0000000000000006 Oct 18 07:52:20 localhost kernel: [ 8.902446] RDX: 0000000000000006 RSI: 0000000000000001 RDI: ffff88033c861300 Oct 18 07:52:20 localhost kernel: [ 8.903652] RBP: ffff88033c065828 R08: 0000000000000000 R09: 0000000000000000 Oct 18 07:52:20 localhost kernel: [ 8.904814] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88033c0658a8 Oct 18 07:52:20 localhost kernel: [ 8.905973] R13: ffff88033c065848 R14: 0000000000000000 R15: ffff8803367a8400 Oct 18 07:52:20 localhost kernel: [ 8.907128] FS: 00007f790de45800(0000) GS:ffff88034fa20000(0000) knlGS:0000000000000000 Oct 18 07:52:20 localhost kernel: [ 8.908285] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 18 07:52:20 localhost kernel: [ 8.909454] CR2: 0000000000000010 CR3: 000000033cb70000 CR4: 00000000000407e0 Oct 18 07:52:20 localhost kernel: [ 8.910620] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Oct 18 07:52:20 localhost kernel: [ 8.911773] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Oct 18 07:52:20 localhost kernel: [ 8.912936] Process udevd (pid: 2760, threadinfo ffff88033c064000, task ffff88033bd5cd80) Oct 18 07:52:20 localhost kernel: [ 8.914123] Stack: Oct 18 07:52:20 localhost kernel: [ 8.915266] ffff88033c065848 ffff88033c861300 ffff88033c065958 ffffffffa0630666 Oct 18 07:52:20 localhost kernel: [ 8.916451] ffff88033c065858 ffffffff8109431d 00004e494d415250 0000000000000000 Oct 18 07:52:20 localhost kernel: [ 8.917641] ffffffffa0630a00 0000000000000001 0000000000000000 0000000000000000 Oct 18 07:52:20 localhost kernel: [ 8.918820] Call Trace: Oct 18 07:52:20 localhost kernel: [ 8.919984] [<ffffffffa0630666>] nouveau_bios_shadow+0x216/0x390 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.921165] [<ffffffff8109431d>] ? trace_hardirqs_on_caller+0x10d/0x1a0 Oct 18 07:52:20 localhost kernel: [ 8.922350] [<ffffffffa0630a00>] ? nouveau_bios_shadow_prom+0x220/0x220 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.923572] [<ffffffffa06307e0>] ? nouveau_bios_shadow+0x390/0x390 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.924745] [<ffffffffa0630270>] ? nouveau_bios_shadow_pci+0xc0/0xc0 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.925913] [<ffffffffa06301b0>] ? nouveau_bios_dtor+0x30/0x30 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.927063] [<ffffffffa0630c45>] nouveau_bios_ctor+0x65/0x420 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.928221] [<ffffffffa062d5f3>] nouveau_object_ctor+0x33/0xc0 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.929431] [<ffffffffa063c75f>] nouveau_devobj_ctor+0x25f/0x740 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.930567] [<ffffffff814b798a>] ? _raw_spin_unlock_irqrestore+0x3a/0x70 Oct 18 07:52:20 localhost kernel: [ 8.931716] [<ffffffffa062d5f3>] nouveau_object_ctor+0x33/0xc0 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.932883] [<ffffffffa062df4b>] nouveau_object_new+0x18b/0x240 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.934021] [<ffffffffa0698ddd>] nouveau_drm_load+0x17d/0x560 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.935143] [<ffffffff81329059>] ? device_register+0x19/0x20 Oct 18 07:52:20 localhost kernel: [ 8.936314] [<ffffffffa00385c9>] ? drm_get_minor+0x259/0x2f0 [drm] Oct 18 07:52:20 localhost kernel: [ 8.937457] [<ffffffffa003abd6>] drm_get_pci_dev+0x186/0x2d0 [drm] Oct 18 07:52:20 localhost kernel: [ 8.938590] [<ffffffff8128191d>] ? __pci_set_master+0x4d/0x80 Oct 18 07:52:20 localhost kernel: [ 8.939736] [<ffffffffa06d98cd>] nouveau_drm_probe+0x1ee/0x214 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.940866] [<ffffffff81285e54>] local_pci_probe+0x74/0x100 Oct 18 07:52:20 localhost kernel: [ 8.941989] [<ffffffff81285ff1>] pci_device_probe+0x111/0x120 Oct 18 07:52:20 localhost kernel: [ 8.943134] [<ffffffff8132b706>] driver_probe_device+0x76/0x220 Oct 18 07:52:20 localhost kernel: [ 8.944258] [<ffffffff8132b953>] __driver_attach+0xa3/0xb0 Oct 18 07:52:20 localhost kernel: [ 8.945363] [<ffffffff8132b8b0>] ? driver_probe_device+0x220/0x220 Oct 18 07:52:20 localhost kernel: [ 8.946629] [<ffffffff813299cd>] bus_for_each_dev+0x4d/0x90 Oct 18 07:52:20 localhost kernel: [ 8.947726] [<ffffffff8132b179>] driver_attach+0x19/0x20 Oct 18 07:52:20 localhost kernel: [ 8.948821] [<ffffffff8132ae20>] bus_add_driver+0x1a0/0x270 Oct 18 07:52:20 localhost kernel: [ 8.949905] [<ffffffffa054b000>] ? 0xffffffffa054afff Oct 18 07:52:20 localhost kernel: [ 8.950968] [<ffffffff8132bfc2>] driver_register+0x72/0x170 Oct 18 07:52:20 localhost kernel: [ 8.951994] [<ffffffffa054b000>] ? 0xffffffffa054afff Oct 18 07:52:20 localhost kernel: [ 8.953083] [<ffffffff81284c6c>] __pci_register_driver+0x5c/0x70 Oct 18 07:52:20 localhost kernel: [ 8.954179] [<ffffffffa003ae3a>] drm_pci_init+0x11a/0x130 [drm] Oct 18 07:52:20 localhost kernel: [ 8.955264] [<ffffffff81325f40>] ? vga_switcheroo_register_handler+0x40/0x90 Oct 18 07:52:20 localhost kernel: [ 8.956319] [<ffffffffa054b000>] ? 0xffffffffa054afff Oct 18 07:52:20 localhost kernel: [ 8.957282] [<ffffffffa054b04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.958206] [<ffffffff810002da>] do_one_initcall+0x11a/0x170 Oct 18 07:52:20 localhost kernel: [ 8.959096] [<ffffffff810a0dbb>] sys_init_module+0xbb/0x220 Oct 18 07:52:20 localhost kernel: [ 8.959960] [<ffffffff814bf856>] system_call_fastpath+0x1a/0x1f Oct 18 07:52:20 localhost kernel: [ 8.960808] Code: c8 00 00 00 48 63 f8 e9 6d ff ff ff 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 48 8b 87 d0 00 00 00 48 85 c0 74 05 <80> 38 55 74 26 31 c0 48 c7 c1 16 35 6e a0 ba 03 00 00 00 48 c7 Oct 18 07:52:20 localhost kernel: [ 8.962850] RIP [<ffffffffa0630395>] nouveau_bios_score+0x15/0xd0 [nouveau] Oct 18 07:52:20 localhost kernel: [ 8.963803] RSP <ffff88033c065818> Oct 18 07:52:20 localhost kernel: [ 8.964737] CR2: 0000000000000010 Oct 18 07:52:20 localhost kernel: [ 8.965680] ---[ end trace 5fce019b56fa0528 ]--- Oct 18 07:52:20 localhost kernel: [ 9.021854] Linux video capture interface: v2.00 Oct 18 07:52:20 localhost kernel: [ 9.166609] Bluetooth: Core ver 2.16 Oct 18 07:52:20 localhost kernel: [ 9.167613] NET: Registered protocol family 31 Oct 18 07:52:20 localhost kernel: [ 9.168590] Bluetooth: HCI device and connection manager initialized Oct 18 07:52:20 localhost kernel: [ 9.169612] Bluetooth: HCI socket layer initialized Oct 18 07:52:20 localhost kernel: [ 9.170594] Bluetooth: L2CAP socket layer initialized Oct 18 07:52:20 localhost kernel: [ 9.171578] Bluetooth: SCO socket layer initialized Oct 18 07:52:20 localhost kernel: [ 9.424721] ath: EEPROM regdomain: 0x60 Oct 18 07:52:20 localhost kernel: [ 9.425869] ath: EEPROM indicates we should expect a direct regpair map Oct 18 07:52:20 localhost kernel: [ 9.426884] ath: Country alpha2 being used: 00 Oct 18 07:52:20 localhost kernel: [ 9.427752] ath: Regpair used: 0x60 Oct 18 07:52:20 localhost kernel: [ 9.445768] uvcvideo: Found UVC 1.00 device USB2.0 UVC 2M WebCam (13d3:5122) Oct 18 07:52:20 localhost kernel: [ 9.457539] input: USB2.0 UVC 2M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13 Oct 18 07:52:20 localhost kernel: [ 9.458637] usbcore: registered new interface driver uvcvideo Oct 18 07:52:20 localhost kernel: [ 9.459736] USB Video Class driver (1.1.1) Oct 18 07:52:20 localhost kernel: [ 9.462143] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' Oct 18 07:52:20 localhost kernel: [ 9.463394] Registered led device: ath9k-phy0 Oct 18 07:52:20 localhost kernel: [ 9.464403] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90006aa0000, irq=17 Oct 18 07:52:20 localhost kernel: [ 9.477838] usbcore: registered new interface driver btusb Oct 18 07:52:20 localhost kernel: [ 9.490768] Bluetooth: Firmware file "ath3k-1.fw" not found Oct 18 07:52:20 localhost kernel: [ 9.491827] ath3k: probe of 1-1.1:1.0 failed with error -2 Oct 18 07:52:20 localhost kernel: [ 9.492871] usbcore: registered new interface driver ath3k Oct 18 07:52:20 localhost kernel: [ 10.258843] EXT4-fs (dm-0): re-mounted. Opts: commit=300 Oct 18 07:52:20 localhost kernel: [ 11.143233] md: md0 stopped. Oct 18 07:52:20 localhost kernel: [ 11.146838] md: bind<sdb1> Oct 18 07:52:20 localhost kernel: [ 11.152438] md: bind<sda1> Oct 18 07:52:20 localhost kernel: [ 11.213070] md: raid1 personality registered for level 1 Oct 18 07:52:20 localhost kernel: [ 11.214774] md/raid1:md0: active with 2 out of 2 mirrors Oct 18 07:52:20 localhost kernel: [ 11.216183] md0: detected capacity change from 0 to 509804544 Oct 18 07:52:20 localhost kernel: [ 11.220499] md0: unknown partition table Oct 18 07:52:20 localhost kernel: [ 11.835554] kjournald starting. Commit interval 300 seconds Oct 18 07:52:20 localhost kernel: [ 11.842696] EXT3-fs (md0): using internal journal Oct 18 07:52:20 localhost kernel: [ 11.844088] EXT3-fs (md0): mounted filesystem with writeback data mode Oct 18 07:52:20 localhost kernel: [ 11.972360] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: commit=300
Added more appropriate people to this. Added both i915 and nouveau people, since apparently that fine piece of hardware has both.
Guys, any ideas?
Paweł, could you perhaps get a photo of the oops and post it somewhere? I'm assuming the oops happens early during boot and you never get a usable machine with dmesg - but if you do, then please do post the whole dmesg too.
Linus
Quoted 8 lines · Paweł Sikora
Hi,
the new 3.7.0-rc1-00078-g8d2b6b3 kernel oopses during startup on my asus laptop with nvidia optimius crap and the builtin core-i7 graphics doesn't start. the 3.5/3.6 kernels work fine, so this looks like a fresh regression.
BR,
Paweł.
Quoted 11 lines · Linus Torvalds
Added more appropriate people to this. Added both i915 and nouveau people, since apparently that fine piece of hardware has both.
Guys, any ideas?
Paweł, could you perhaps get a photo of the oops and post it somewhere? I'm assuming the oops happens early during boot and you never get a usable machine with dmesg - but if you do, then please do post the whole dmesg too.
Linus
Hi Linus,
You must have missed the oops that was attached to the mail: http://www.spinics.net/lists/kernel/msg1420355.html
Paweł, could you try the attached patch please ?
Martin
Quoted 1 line
From
ea15dc1cf87236da78e8e88ecc3864ffab006ae0Mon Sep 17 00:00:00 2001
From: Martin Peres <[email protected]>
Date: Sat, 20 Oct 2012 00:08:15 +0200
Subject: [PATCH] drm/nouveau/bios: improve error handling when reading the
vbios from ACPI
Reported-by Pawel Sikora <[email protected]>
Signed-off-by Martin Peres <[email protected]>
--- drivers/gpu/drm/nouveau/core/subdev/bios/base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/core/subdev/bios/base.c +3 -1
@@ -188,8 +188,10 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios)int cnt =65536 /4096 ;int ret; -if (!nouveau_acpi_rom_supported (pdev)) +if (!nouveau_acpi_rom_supported (pdev)) { + bios->data =NULL ;return ; + } bios->data =kmalloc (65536 ,GFP_KERNEL ); bios->size =0 ;
Signature · 1 line
1.7.12.3
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 3 lines · Martin Peres
You must have missed the oops that was attached to the mail:
http://www.spinics.net/lists/kernel/msg1420355.html
I did indeed. So never mind about that dmesg request, Paweł ;-p
Quoted 1 line
Paweł, could you try the attached patch please ?
Thanks for being on it,
Linus
Quoted 4 lines · Linus Torvalds
Added more appropriate people to this. Added both i915 and nouveau people, since apparently that fine piece of hardware has both.
Guys, any ideas?
Plese see https://lkml.org/lkml/2012/10/19/371 , this is the same thing going on. Reverting
Ben Skeggs <[email protected]>
drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB
fixes the problem.
Quoted 7 lines · Heinz Diehl
Quoted 4 lines · Linus Torvalds
Added more appropriate people to this. Added both i915 and nouveau people, since apparently that fine piece of hardware has both.
Guys, any ideas?
Quoted 7 lines
Plese see https://lkml.org/lkml/2012/10/19/371 , this is the same thing going on. Reverting
Ben Skeggs <[email protected]>
drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiBfixes the problem.
Can you test the attached patch too ? I rebased the previous one I sent on top on 3.7-rc1 as I accidentally used an older version.
Martin
Quoted 1 line
From
f09d58dc23a6e48ed56a1d9bf803f800f0c59e83Mon Sep 17 00:00:00 2001
From: Martin Peres <[email protected]>
Date: Sat, 20 Oct 2012 11:03:36 +0200
Subject: [PATCH] drm/nouveau/bios: improve error handling when reading the
vbios from ACPI
Reported-by Pawel Sikora <[email protected]>
Signed-off-by Martin Peres <[email protected]>
--- drivers/gpu/drm/nouveau/core/subdev/bios/base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/core/subdev/bios/base.c +3 -1
@@ -188,8 +188,10 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios)int ret, cnt, i;u8 data[3 ]; -if (!nouveau_acpi_rom_supported (pdev)) +if (!nouveau_acpi_rom_supported (pdev)) { + bios->data =NULL ;return ; + } bios->size =0 ;if (nouveau_acpi_get_bios_chunk (data,0 ,3 ) ==3 )
Signature · 1 line
1.7.12.4
Quoted 2 lines · Martin Peres
Can you test the attached patch too ? I rebased the previous one I sent on top on 3.7-rc1 as I accidentally used an older version.
Yes, of course.
Tried it. Unfortunately, the crash remains the same as reported.
Quoted 8 lines · Heinz Diehl
Quoted 2 lines · Martin Peres
Can you test the attached patch too ? I rebased the previous one I sent on top on 3.7-rc1 as I accidentally used an older version.
Yes, of course.
Tried it. Unfortunately, the crash remains the same as reported.
Try this one.
Now, the question is: could 3.6 kernel get VBIOS by ACPI? If yes, please mount debugfs and send vbios.rom to me please. (cat /sys/kernel/debug/dri/0/vbios.rom > vbios.rom)
---
From: Marcin Slusarz <[email protected]>
Subject: [PATCH] drm/nouveau: validate vbios size
Without checking, we could detect vbios size as 0, allocate 0-byte array (kmalloc returns invalid pointer for such allocation) and crash in nouveau_bios_score while checking for vbios signature.
Reported-by Heinz Diehl <[email protected]>
Signed-off-by Marcin Slusarz <[email protected]>
--- drivers/gpu/drm/nouveau/core/subdev/bios/base.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
drivers/gpu/drm/nouveau/core/subdev/bios/base.c +13 -3
@@ -72,7 +72,7 @@ nouveau_bios_shadow_of(struct nouveau_bios *bios) } data =of_get_property (dn,"NVDA,BMP" , &size); -if (data) { +if (data && size) { bios->size = size; bios->data =kmalloc (bios->size,GFP_KERNEL );if (bios->data)
@@ -104,6 +104,9 @@ nouveau_bios_shadow_pramin(struct nouveau_bios *bios) goto out; bios->size =nv_rd08 (bios,0x700002 ) *512 ; +if (!bios->size) + goto out; + bios->data =kmalloc (bios->size,GFP_KERNEL );if (bios->data) {for (i =0 ; i < bios->size; i++)
@@ -155,6 +158,9 @@ nouveau_bios_shadow_prom(struct nouveau_bios *bios)/* read entire bios image to system memory */ bios->size =nv_rd08 (bios,0x300002 ) *512 ; +if (!bios->size) + goto out; + bios->data =kmalloc (bios->size,GFP_KERNEL );if (bios->data) {for (i =0 ; i < bios->size; i++)
@@ -194,6 +200,8 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) bios->size =0 ;if (nouveau_acpi_get_bios_chunk (data,0 ,3 ) ==3 ) bios->size = data[2 ] *512 ; +if (!bios->size) +return ; bios->data =kmalloc (bios->size,GFP_KERNEL );for (i =0 ; bios->data && i < bios->size; i += cnt) {
@@ -229,12 +237,14 @@ nouveau_bios_shadow_pci(struct nouveau_bios *bios)static int nouveau_bios_score (struct nouveau_bios *bios,const bool writeable) { -if (!bios->data || bios->data[0 ] !=0x55 || bios->data[1 ] !=0xAA ) { +if (bios->size <3 || !bios->data || bios->data[0 ] !=0x55 || + bios->data[1 ] !=0xAA ) {nv_info (bios,"... signature not found\n" );return 0 ; } -if (nvbios_checksum (bios->data, bios->data[2 ] *512 )) { +if (nvbios_checksum (bios->data, +min_t (u32, bios->data[2 ] *512 , bios->size))) {nv_info (bios,"... checksum invalid\n" );/* if a ro image is somewhat bad, it's probably all rubbish */ return writeable ?2 :1 ;
Signature · 1 line
1.7.12
Quoted 20 lines · Marcin Slusarz
Quoted 8 lines · Heinz Diehl
Quoted 2 lines · Martin Peres
Can you test the attached patch too ? I rebased the previous one I sent on top on 3.7-rc1 as I accidentally used an older version.
Yes, of course.
Tried it. Unfortunately, the crash remains the same as reported.
Try this one.
Now, the question is: could 3.6 kernel get VBIOS by ACPI? If yes, please mount debugfs and send vbios.rom to me please. (cat
/sys/kernel/debug/dri/0/vbios.rom> vbios.rom)---
From: Marcin Slusarz <[email protected]>
Subject: [PATCH] drm/nouveau: validate vbios size
Quoted 5 lines
Without checking, we could detect vbios size as 0, allocate 0-byte array (kmalloc returns invalid pointer for such allocation) and crash in
nouveau_bios_scorewhile checking for vbios signature.Reported-by Heinz Diehl <[email protected]>
And of course:
Reported-by Paweł Sikora <[email protected]>
Quoted 65 lines
Signed-off-by Marcin Slusarz <[email protected]>--- drivers/gpu/drm/nouveau/core/subdev/bios/base.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)drivers/gpu/drm/nouveau/core/subdev/bios/base.c +13
-3@@ -72,7 +72,7 @@ nouveau_bios_shadow_of(struct nouveau_bios *bios) } data =of_get_property (dn,"NVDA,BMP" , &size); -if (data) { +if (data && size) { bios->size = size; bios->data =kmalloc (bios->size,GFP_KERNEL );if (bios->data)@@ -104,6 +104,9 @@ nouveau_bios_shadow_pramin(struct nouveau_bios *bios) goto out; bios->size =nv_rd08 (bios,0x700002 ) *512 ; +if (!bios->size) + goto out; + bios->data =kmalloc (bios->size,GFP_KERNEL );if (bios->data) {for (i =0 ; i < bios->size; i++)@@ -155,6 +158,9 @@ nouveau_bios_shadow_prom(struct nouveau_bios *bios)/* read entire bios image to system memory */ bios->size =nv_rd08 (bios,0x300002 ) *512 ; +if (!bios->size) + goto out; + bios->data =kmalloc (bios->size,GFP_KERNEL );if (bios->data) {for (i =0 ; i < bios->size; i++)@@ -194,6 +200,8 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) bios->size =0 ;if (nouveau_acpi_get_bios_chunk (data,0 ,3 ) ==3 ) bios->size = data[2 ] *512 ; +if (!bios->size) +return ; bios->data =kmalloc (bios->size,GFP_KERNEL );for (i =0 ; bios->data && i < bios->size; i += cnt) {@@ -229,12 +237,14 @@ nouveau_bios_shadow_pci(struct nouveau_bios *bios)static int nouveau_bios_score (struct nouveau_bios *bios,const bool writeable) { -if (!bios->data || bios->data[0 ] !=0x55 || bios->data[1 ] !=0xAA ) { +if (bios->size <3 || !bios->data || bios->data[0 ] !=0x55 || + bios->data[1 ] !=0xAA ) {nv_info (bios,"... signature not found\n" );return 0 ; } -if (nvbios_checksum (bios->data, bios->data[2 ] *512 )) { +if (nvbios_checksum (bios->data, +min_t (u32, bios->data[2 ] *512 , bios->size))) {nv_info (bios,"... checksum invalid\n" );/* if a ro image is somewhat bad, it's probably all rubbish */ return writeable ?2 :1 ;
Quoted 1 line · Marcin Slusarz
Try this one.
It works, now I can boot again. However, nouveau seems to be dead now. The dmesg output with your patch on top of 3.7-rc1 is:
[ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1 [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536) [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image... [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22 [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22 [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22 [ 3.740523] dracut: Starting plymouth daemon
And here's the same output with plain vanilla 3.6.2:
[ 3.588791] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8800b1) [ 3.599783] vga_switcheroo: enabled [ 3.601303] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 3.602817] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 3.604294] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS [ 3.605822] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 3.607310] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS [ 3.856854] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 3.859409] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI [ 3.861907] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 3.864369] [drm] nouveau 0000:01:00.0: Bios version 70.18.5d.00 [ 3.866829] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 3.869479] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 3.870871] [drm] nouveau 0000:01:00.0: DCB version 4.0 [ 3.872220] [drm] nouveau 0000:01:00.0: DCB outp 00: 02014300 00000000 [ 3.873611] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040 [ 3.874994] [drm] nouveau 0000:01:00.0: DCB conn 01: 00410146 [ 3.876367] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001261 [ 3.877719] [drm] nouveau 0000:01:00.0: DCB conn 03: 00002330 [ 3.879043] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000400 [ 3.880355] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000560 [ 3.881662] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables. [ 3.882961] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDECD [ 3.936538] [drm] nouveau 0000:01:00.0: 0xDE34: i2c wr fail: -6 [ 3.957932] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE378 [ 3.987046] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEF4B [ 3.988396] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEF64 [ 3.990741] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF04B [ 3.992020] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF0B0 [ 4.018084] [TTM] Zone kernel: Available graphics memory: 1917766 kiB [ 4.019438] [TTM] Initializing pool allocator [ 4.020694] [TTM] Initializing DMA pool allocator [ 4.021914] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3) [ 4.024515] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 4.083748] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.084909] [drm] No driver support for vblank timestamp query. [ 4.085985] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own [ 4.246449] [drm] nouveau 0000:01:00.0: 3 available performance level(s) [ 4.247560] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV [ 4.248707] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV [ 4.249807] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV [ 4.250946] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz [ 4.289382] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies [ 4.668174] No connectors reported connected with modes [ 4.669252] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.683844] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x2c0000, bo ffff88013ab53400 [ 4.685057] fb1: nouveaufb frame buffer device [ 4.686244] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1 [ 4.691233] dracut: Starting plymouth daemon
Quoted 3 lines
Now, the question is: could 3.6 kernel get VBIOS by ACPI? If yes, please mount debugfs and send vbios.rom to me please. (cat
/sys/kernel/debug/dri/0/vbios.rom> vbios.rom)
There's no such file on my machine (with mounted debugfs, of course).
Quoted 81 lines · Heinz Diehl
Quoted 1 line · Marcin Slusarz
Try this one.
It works, now I can boot again. However, nouveau seems to be dead now. The dmesg output with your patch on top of 3.7-rc1 is:
[ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1 [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536) [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image... [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22 [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22 [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22 [ 3.740523] dracut: Starting plymouth daemonAnd here's the same output with plain vanilla 3.6.2:
[ 3.588791] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8800b1) [ 3.599783] vga_switcheroo: enabled [ 3.601303] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 3.602817] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 3.604294] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS [ 3.605822] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 3.607310] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS [ 3.856854] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 3.859409] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI [ 3.861907] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 3.864369] [drm] nouveau 0000:01:00.0: Bios version 70.18.5d.00 [ 3.866829] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 3.869479] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 3.870871] [drm] nouveau 0000:01:00.0: DCB version 4.0 [ 3.872220] [drm] nouveau 0000:01:00.0: DCB outp 00: 02014300 00000000 [ 3.873611] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040 [ 3.874994] [drm] nouveau 0000:01:00.0: DCB conn 01: 00410146 [ 3.876367] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001261 [ 3.877719] [drm] nouveau 0000:01:00.0: DCB conn 03: 00002330 [ 3.879043] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000400 [ 3.880355] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000560 [ 3.881662] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables. [ 3.882961] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDECD [ 3.936538] [drm] nouveau 0000:01:00.0: 0xDE34: i2c wr fail: -6 [ 3.957932] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE378 [ 3.987046] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEF4B [ 3.988396] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEF64 [ 3.990741] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF04B [ 3.992020] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF0B0 [ 4.018084] [TTM] Zone kernel: Available graphics memory: 1917766 kiB [ 4.019438] [TTM] Initializing pool allocator [ 4.020694] [TTM] Initializing DMA pool allocator [ 4.021914] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3) [ 4.024515] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 4.083748] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.084909] [drm] No driver support for vblank timestamp query. [ 4.085985] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own [ 4.246449] [drm] nouveau 0000:01:00.0: 3 available performance level(s) [ 4.247560] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV [ 4.248707] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV [ 4.249807] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV [ 4.250946] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz [ 4.289382] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies [ 4.668174] No connectors reported connected with modes [ 4.669252] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.683844] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x2c0000, bo ffff88013ab53400 [ 4.685057] fb1: nouveaufb frame buffer device [ 4.686244] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1 [ 4.691233] dracut: Starting plymouth daemon
Quoted 5 lines
Quoted 3 lines
Now, the question is: could 3.6 kernel get VBIOS by ACPI? If yes, please mount debugfs and send vbios.rom to me please. (cat
/sys/kernel/debug/dri/0/vbios.rom> vbios.rom)There's no such file on my machine (with mounted debugfs, of course).
On 3.6 kernel? (It doesn't exist on 3.7)
Note that it may be in other directory than "0".
Marcin
Quoted 82 lines · Marcin Slusarz
Quoted 81 lines · Heinz Diehl
Quoted 1 line · Marcin Slusarz
Try this one.
It works, now I can boot again. However, nouveau seems to be dead now. The dmesg output with your patch on top of 3.7-rc1 is:
[ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1 [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536) [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image... [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22 [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22 [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22 [ 3.740523] dracut: Starting plymouth daemonAnd here's the same output with plain vanilla 3.6.2:
[ 3.588791] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8800b1) [ 3.599783] vga_switcheroo: enabled [ 3.601303] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 3.602817] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 3.604294] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS [ 3.605822] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 3.607310] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS [ 3.856854] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 3.859409] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI [ 3.861907] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 3.864369] [drm] nouveau 0000:01:00.0: Bios version 70.18.5d.00 [ 3.866829] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 3.869479] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 3.870871] [drm] nouveau 0000:01:00.0: DCB version 4.0 [ 3.872220] [drm] nouveau 0000:01:00.0: DCB outp 00: 02014300 00000000 [ 3.873611] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040 [ 3.874994] [drm] nouveau 0000:01:00.0: DCB conn 01: 00410146 [ 3.876367] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001261 [ 3.877719] [drm] nouveau 0000:01:00.0: DCB conn 03: 00002330 [ 3.879043] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000400 [ 3.880355] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000560 [ 3.881662] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables. [ 3.882961] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDECD [ 3.936538] [drm] nouveau 0000:01:00.0: 0xDE34: i2c wr fail: -6 [ 3.957932] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE378 [ 3.987046] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEF4B [ 3.988396] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEF64 [ 3.990741] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF04B [ 3.992020] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF0B0 [ 4.018084] [TTM] Zone kernel: Available graphics memory: 1917766 kiB [ 4.019438] [TTM] Initializing pool allocator [ 4.020694] [TTM] Initializing DMA pool allocator [ 4.021914] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3) [ 4.024515] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 4.083748] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.084909] [drm] No driver support for vblank timestamp query. [ 4.085985] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own [ 4.246449] [drm] nouveau 0000:01:00.0: 3 available performance level(s) [ 4.247560] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV [ 4.248707] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV [ 4.249807] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV [ 4.250946] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz [ 4.289382] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies [ 4.668174] No connectors reported connected with modes [ 4.669252] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.683844] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x2c0000, bo ffff88013ab53400 [ 4.685057] fb1: nouveaufb frame buffer device [ 4.686244] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1 [ 4.691233] dracut: Starting plymouth daemon
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
Now, the question is: could 3.6 kernel get VBIOS by ACPI? If yes, please mount debugfs and send vbios.rom to me please. (cat
/sys/kernel/debug/dri/0/vbios.rom> vbios.rom)There's no such file on my machine (with mounted debugfs, of course).
On 3.6 kernel? (It doesn't exist on 3.7)
Note that it may be in other directory than "0".
Oh, you need CONFIG_DRM_NOUVEAU_DEBUG too.
Quoted 2 lines · Marcin Slusarz
On 3.6 kernel? (It doesn't exist on 3.7)
Note that it may be in other directory than "0".
[root@wildsau linux-3.6.2]# cat .config | grep -i "nouveau" CONFIG_DRM_NOUVEAU=m CONFIG_DRM_NOUVEAU_BACKLIGHT=y CONFIG_DRM_NOUVEAU_DEBUG=y
I grepped the whole disk, there's no vbios.rom at all.
Quoted 20 lines · Heinz Diehl
Quoted 1 line · Marcin Slusarz
Try this one.
It works, now I can boot again. However, nouveau seems to be dead now. The dmesg output with your patch on top of 3.7-rc1 is:
[ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1 [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536) [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found
Quoted 8 lines
[ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image... [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22 [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22 [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22 [ 3.740523] dracut: Starting plymouth daemon
Hmm, maybe we can't fetch 3 bytes only...
Let's check this:
---
drivers/gpu/drm/nouveau/core/subdev/bios/base.c +4 -2
@@ -192,14 +192,16 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) {struct pci_dev *pdev =nv_device (bios)->pdev;int ret, cnt, i; -u8 data[3 ]; +u8 *data;if (!nouveau_acpi_rom_supported (pdev))return ; bios->size =0 ; -if (nouveau_acpi_get_bios_chunk (data,0 ,3 ) ==3 ) + data =kmalloc (4096 ,GFP_KERNEL ); +if (data &&nouveau_acpi_get_bios_chunk (data,0 ,4096 ) >=3 ) bios->size = data[2 ] *512 ; +kfree (data);if (!bios->size)return ;
---
Please attach acpidump output.
Quoted 47 lines · On Sunday 21 of October 2012 00:19:48 Marcin Slusarz wrote:
Quoted 20 lines · Heinz Diehl
Quoted 1 line · Marcin Slusarz
Try this one.
It works, now I can boot again. However, nouveau seems to be dead now. The dmesg output with your patch on top of 3.7-rc1 is:
[ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1 [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536) [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not foundQuoted 8 lines
[ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image... [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22 [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22 [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22 [ 3.740523] dracut: Starting plymouth daemonHmm, maybe we can't fetch 3 bytes only...
Let's check this:
---
drivers/gpu/drm/nouveau/core/subdev/bios/base.c +1
-1@@ -192,14 +192,16 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) {struct pci_dev *pdev =nv_device (bios)->pdev;int ret, cnt, i; -u8 data[3 ]; +u8 *data;if (!nouveau_acpi_rom_supported (pdev))
drivers/gpu/drm/nouveau/core/subdev/bios/base.c nouveau_bios_shadow_acpi(struct nouveau_bios *bios) · line 206
Quoted 10 lines
drivers/gpu/drm/nouveau/core/subdev/bios/base.c +3
-1return ; bios->size =0 ; -if (nouveau_acpi_get_bios_chunk (data,0 ,3 ) ==3 ) + data =kmalloc (4096 ,GFP_KERNEL ); +if (data &&nouveau_acpi_get_bios_chunk (data,0 ,4096 ) >=3 ) bios->size = data[2 ] *512 ; +kfree (data);if (!bios->size)return ;
with these both patches applied my laptop boots and gui works fine. here's dmesg:
(...)
[ 8.751795] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 8.751798] nouveau [ VBIOS][0000:01:00.0] using image from ACPI [ 8.751895] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 8.751898] nouveau [ VBIOS][0000:01:00.0] version 70.08.45.00 [ 8.752366] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised [ 8.752368] nouveau [ VBIOS][0000:01:00.0] running init tables [ 8.867660] nouveau [ MXM][0000:01:00.0] no VBIOS data, nothing to do [ 8.867690] nouveau [ PFB][0000:01:00.0] RAM type: DDR3 [ 8.867692] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB [ 8.901523] vga_switcheroo: enabled [ 8.901979] [TTM] Zone kernel: Available graphics memory: 6104282 kiB [ 8.901980] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 8.901982] [TTM] Initializing pool allocator [ 8.902014] [TTM] Initializing DMA pool allocator [ 8.902180] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [ 8.902184] nouveau [ DRM] VRAM: 512 MiB [ 8.902185] nouveau [ DRM] GART: 512 MiB [ 8.902188] nouveau [ DRM] BIT BIOS found [ 8.902190] nouveau [ DRM] Bios version 70.08.45.00 [ 8.902192] nouveau [ DRM] TMDS table version 2.0 [ 8.902194] nouveau [ DRM] DCB version 4.0 [ 8.902196] nouveau [ DRM] DCB outp 00: 02011300 00000000 [ 8.902198] nouveau [ DRM] DCB conn 01: 00000100 [ 8.903540] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.903541] [drm] No driver support for vblank timestamp query. [ 8.903545] nouveau [ DRM] ACPI backlight interface available, not registering our own [ 8.903938] nouveau [ DRM] 3 available performance level(s) [ 8.903941] nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV [ 8.903943] nouveau [ DRM] 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV [ 8.903946] nouveau [ DRM] 3: core 672MHz shader 1344MHz memory 900MHz voltage 980mV [ 8.903948] nouveau [ DRM] c: core 202MHz shader 405MHz memory 324MHz voltage 980mV [ 8.908895] nouveau [ DRM] MM: using COPY1 for buffer copies [ 8.988695] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88033b5f1800 [ 8.988955] fb1: nouveaufb frame buffer device [ 8.988959] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 1
(...)
Quoted 1 line
Please attach acpidump output.
Quoted 1 line · Paweł Sikora
with these both patches applied my laptop boots and gui works fine.
The same here. The two patches together, applied to 3.7-rc1 let my machine boot again. Here's the relevant dmesg cut:
[ 3.702671] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1 [ 3.704643] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 3.707003] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.711393] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.712793] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.714147] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.715578] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.716969] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... [ 4.207512] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 4.209711] nouveau [ VBIOS][0000:01:00.0] using image from ACPI [ 4.212469] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 4.214855] nouveau [ VBIOS][0000:01:00.0] version 70.18.5d.00 [ 4.217554] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised [ 4.219922] nouveau [ VBIOS][0000:01:00.0] running init tables [ 4.342202] nouveau [ MXM][0000:01:00.0] no VBIOS data, nothing to do [ 4.343590] nouveau [ PFB][0000:01:00.0] RAM type: DDR3 [ 4.344916] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB [ 4.991887] vga_switcheroo: enabled [ 4.993495] [TTM] Zone kernel: Available graphics memory: 1917720 kiB [ 4.994911] [TTM] Initializing pool allocator [ 4.996228] [TTM] Initializing DMA pool allocator [ 4.998915] nouveau [ DRM] VRAM: 1024 MiB [ 5.000251] nouveau [ DRM] GART: 512 MiB [ 5.001579] nouveau [ DRM] BIT BIOS found [ 5.002904] nouveau [ DRM] Bios version 70.18.5d.00 [ 5.004229] nouveau [ DRM] TMDS table version 2.0 [ 5.005545] nouveau [ DRM] DCB version 4.0 [ 5.006810] nouveau [ DRM] DCB outp 00: 02014300 00000000 [ 5.008115] nouveau [ DRM] DCB conn 00: 00000040 [ 5.009441] nouveau [ DRM] DCB conn 01: 00410146 [ 5.010745] nouveau [ DRM] DCB conn 02: 00001261 [ 5.012019] nouveau [ DRM] DCB conn 03: 00002330 [ 5.013255] nouveau [ DRM] DCB conn 04: 00000400 [ 5.014452] nouveau [ DRM] DCB conn 05: 00000560 [ 5.052344] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.053486] [drm] No driver support for vblank timestamp query. [ 5.054590] nouveau [ DRM] ACPI backlight interface available,not registering our own [ 5.356822] nouveau [ DRM] 3 available performance level(s) [ 5.358682] nouveau [ DRM] 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV [ 5.360442] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV [ 5.362215] nouveau [ DRM] 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV [ 5.363998] nouveau [ DRM] c: core 405MHz shader 810MHz memory 405MHz [ 5.404143] nouveau [ DRM] MM: using COPY for buffer copies [ 5.481593] No connectors reported connected with modes [ 5.482667] [drm] Cannot find any crtc or sizes - going 1024x768 [ 5.517932] nouveau [ DRM] allocated 1024x768 fb: 0x70000, bo ffff88013a6d3400 [ 5.519236] fb1: nouveaufb frame buffer device [ 5.520368] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 1 [ 5.527378] dracut: Starting plymouth daemon
Quoted 98 lines · Paweł Sikora
Quoted 47 lines · On Sunday 21 of October 2012 00:19:48 Marcin Slusarz wrote:
Quoted 20 lines · Heinz Diehl
Quoted 1 line · Marcin Slusarz
Try this one.
It works, now I can boot again. However, nouveau seems to be dead now. The dmesg output with your patch on top of 3.7-rc1 is:
[ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1 [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536) [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not foundQuoted 8 lines
[ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image... [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22 [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22 [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22 [ 3.740523] dracut: Starting plymouth daemonHmm, maybe we can't fetch 3 bytes only...
Let's check this:
---
drivers/gpu/drm/nouveau/core/subdev/bios/base.c +1
-1@@ -192,14 +192,16 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) {struct pci_dev *pdev =nv_device (bios)->pdev;int ret, cnt, i; -u8 data[3 ]; +u8 *data;if (!nouveau_acpi_rom_supported (pdev))drivers/gpu/drm/nouveau/core/subdev/bios/base.c nouveau_bios_shadow_acpi(struct nouveau_bios *bios) · line 206
Quoted 10 lines
drivers/gpu/drm/nouveau/core/subdev/bios/base.c +3
-1return ; bios->size =0 ; -if (nouveau_acpi_get_bios_chunk (data,0 ,3 ) ==3 ) + data =kmalloc (4096 ,GFP_KERNEL ); +if (data &&nouveau_acpi_get_bios_chunk (data,0 ,4096 ) >=3 ) bios->size = data[2 ] *512 ; +kfree (data);if (!bios->size)return ;with these both patches applied my laptop boots and gui works fine. here's dmesg:
(...)
[ 8.751795] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 8.751798] nouveau [ VBIOS][0000:01:00.0] using image from ACPI [ 8.751895] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 8.751898] nouveau [ VBIOS][0000:01:00.0] version 70.08.45.00 [ 8.752366] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised [ 8.752368] nouveau [ VBIOS][0000:01:00.0] running init tables [ 8.867660] nouveau [ MXM][0000:01:00.0] no VBIOS data, nothing to do [ 8.867690] nouveau [ PFB][0000:01:00.0] RAM type: DDR3 [ 8.867692] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB [ 8.901523] vga_switcheroo: enabled [ 8.901979] [TTM] Zone kernel: Available graphics memory: 6104282 kiB [ 8.901980] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 8.901982] [TTM] Initializing pool allocator [ 8.902014] [TTM] Initializing DMA pool allocator [ 8.902180] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [ 8.902184] nouveau [ DRM] VRAM: 512 MiB [ 8.902185] nouveau [ DRM] GART: 512 MiB [ 8.902188] nouveau [ DRM] BIT BIOS found [ 8.902190] nouveau [ DRM] Bios version 70.08.45.00 [ 8.902192] nouveau [ DRM] TMDS table version 2.0 [ 8.902194] nouveau [ DRM] DCB version 4.0 [ 8.902196] nouveau [ DRM] DCB outp 00: 02011300 00000000 [ 8.902198] nouveau [ DRM] DCB conn 01: 00000100 [ 8.903540] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.903541] [drm] No driver support for vblank timestamp query. [ 8.903545] nouveau [ DRM] ACPI backlight interface available, not registering our own [ 8.903938] nouveau [ DRM] 3 available performance level(s) [ 8.903941] nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV [ 8.903943] nouveau [ DRM] 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV [ 8.903946] nouveau [ DRM] 3: core 672MHz shader 1344MHz memory 900MHz voltage 980mV [ 8.903948] nouveau [ DRM] c: core 202MHz shader 405MHz memory 324MHz voltage 980mV [ 8.908895] nouveau [ DRM] MM: using COPY1 for buffer copies [ 8.988695] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88033b5f1800 [ 8.988955] fb1: nouveaufb frame buffer device [ 8.988959] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 1
Quoted 6 lines
(...)
Quoted 1 line
Please attach acpidump output.
This looks like ACPI bug...
Nouveau calls this method:
Method (_ROM, 2, NotSerialized)// _ROM: Read-Only Memory {
Add (Arg0, RBUF, Local0)
ShiftLeft (Arg1, 0x03, Local1)
Name (VBUF, Buffer (Arg1) {})
OperationRegion (VROM, SystemMemory, Local0, Local1) Field (VROM, ByteAcc, NoLock, Preserve)
{
ROMI, 65536}
Store (ROMI, VBUF)
Return (VBUF)
}
with Arg0 == 0, Arg1 == 3 and gets:
ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGR.GFX0._ROM] (Node ffff88033e47fe88), AE_AML_REGION_LIMIT (20120913/psparse-536)
We can workaround it by aligning Arg1 to 4096 (I'm wondering what is the minimal value), but do we really have to?
Marcin
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 6 lines · Marcin Slusarz
Quoted 4 lines
Quoted 1 line
Please attach acpidump output.
This looks like ACPI bug...
I guess my acpidump didn't make it to the list. Anyway, here it is:
Quoted 2 lines · Marcin Slusarz
This looks like ACPI bug...
I'm _shocked_ to hear that firmware would be fragile.
Anyway, here's the #1 thing to keep in mind about firmware:
- firmware is *always* buggy.
It's that simple. Don't expect anything else. Firmware is written by people who have lost the will to live (why? Because they do firmware development for a living), and the only thing keeping them going is the drugs. And they're not the "fun" kind of drugs. The end result is predictable. In their drug-induced haze, they make a mess.
So saying "ACPI is buggy" is like saying "water is wet". Deal with it.
Quoted 9 lines
Nouveau calls this method: [...]
with Arg0 == 0, Arg1 == 3 and gets:
ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGR.GFX0._ROM] (Node
ffff88033e47fe88),AE_AML_REGION_LIMIT(20120913/psparse-536)We can workaround it by aligning Arg1 to 4096 (I'm wondering what is the minimal value), but do we really have to?
Yes, you really have to. You need to understand that ACPI has been tested with one thing, and one thing only: Windows. Clearly windows doesn't ask for some three-byte region. So it doesn't work. Big surprise. Untested code written by monkeys on crack - what did you expect?
So don't do "clever" things. When it comes to firmware, you need to expect it to be buggy, and try to access it the way Windows accesses it.
Now, whether Windows realy always does things with a 4kB-aligned access, or whether you just need to make sure that you're (say) 4-byte-aligned, I don't know. Maybe doing things four (or eight, or sixteen) bytes at a time will work. You can try. But if we know from past experience that a 4kB block-size will work, I'd suggest just saying
"It's stupid, but stupid is good - we're working with firmware"
Think of firmware the way you think of hardware: it's buggy and needs workarounds.
Linus
Quoted 10 lines · Linus Torvalds
Quoted 2 lines · Marcin Slusarz
This looks like ACPI bug...
I'm _shocked_ to hear that firmware would be fragile.
Anyway, here's the #1 thing to keep in mind about firmware:
- firmware is *always* buggy.
I know. But this bug is not about broken firmware. It's about Linux kernel ACPI implementation, which (I think) wrongly interprets ACPI script.
Marcin
Quoted 3 lines · Marcin Slusarz
I know. But this bug is not about broken firmware. It's about Linux kernel ACPI implementation, which (I think) wrongly interprets ACPI script.
Hmm. Len, care to comment? Marcin quoted the AML and our arguments in an earlier thing. I don't read AML, so I was assuming it's the AML itself that was buggy, not our interpretation of it..
Linus
Quoted 6 lines · On Sunday 21 October 2012 16:49:08 Marcin Slusarz wrote:
Quoted 5 lines · Linus Torvalds
On Sun, Oct 21, 2012 at 5:09 AM, Marcin Slusarz
Quoted 1 line · <[email protected]> wrote:
This looks like ACPI bug...
Quoted 8 lines
Quoted 5 lines
I'm shocked to hear that firmware would be fragile.
Anyway, here's the #1 thing to keep in mind about firmware:
- firmware is always buggy.
I know. But this bug is not about broken firmware. It's about Linux kernel ACPI implementation, which (I think) wrongly interprets ACPI script.
The ACPI implementation is fine, it is just the fw engineers that suck. I see I have not cc'd the linux-vger ml when replying to a previous mail. I'll paste it below:
Since commit 9a334cd "drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB" chunks are not always read in multiples of 4KiB anymore (less is possible). That is the only obvious thing I can think of atm (besides the kmalloc(0) bug for which Martin submitted a patch in the previous mail).
Do you still still have an Asus laptop with the same BIOS as in
https://bugzilla.kernel.org/show_bug.cgi?id=19702? (if yes, then the acpidump from that bug still applies).
This is the ACPI _ROM method that is being called:
Method (_ROM, 2, NotSerialized) // _ROM: Read-Only Memory
{
Add (Arg0, RBUF, Local0)
ShiftLeft (Arg1, 0x03, Local1) // times 8, bytes to bits?
Name (VBUF, Buffer (Arg1) {})
OperationRegion (VROM, SystemMemory, Local0, Local1)
Field (VROM, ByteAcc, NoLock, Preserve)
{
ROMI, 65536
}
Store (ROMI, VBUF)
Return (VBUF)
}Arg0 is the offset (0 when first reading the size), Arg1 is the number of read bytes (3). Note the use of Local1 in OperationRegion. The meaning there is bytes, but a multiple of the requested bytes is passed. So if we request 4096 bytes, we end up with a VROM of size 32KiB. ROMI is 65536 bits (or 8192 bytes), hence reading 4096 does not give errors. But reading only 3 bytes will fail. Martin, I saw your second patch (https://lkml.org/lkml/2012/10/20/150)
which takes care of the first case, but it skips the case where the ROM is of an odd size (does that even happen, something like 64KiB+1 bytes? No idea.)
Addition: Conclusion: this means that the request must have a length must be at least 1 KiB or it will fail with the ACPI error that you have seen before. This AML snippet suck.
Regards,
Peter
Quoted 30 lines · Marcin Slusarz
Quoted 20 lines · Heinz Diehl
Quoted 1 line · Marcin Slusarz
Try this one.
It works, now I can boot again. However, nouveau seems to be dead now. The dmesg output with your patch on top of 3.7-rc1 is:
[ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1 [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8) [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image... [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210) [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536) [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not foundQuoted 8 lines
[ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image... [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22 [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22 [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22 [ 3.740523] dracut: Starting plymouth daemon
Quoted 1 line
Hmm, maybe we can't fetch 3 bytes only...
Yeah, I noticed this issue myself on a machine here while backporting the patch to another (older) kernel. I assumed (wrongly, apparently) that there was just a bug in the older kernel's ACPI implementation that had been fixed upstream already (I didn't see it on the same machine with the current kernel)... So, I didn't send the patch.
I'll queue it up with a -fixes batch later today.
Sorry about the trouble,
Ben.
Quoted 30 lines
Let's check this:
---
drivers/gpu/drm/nouveau/core/subdev/bios/base.c +4
-3@@ -192,14 +192,16 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) {struct pci_dev *pdev =nv_device (bios)->pdev;int ret, cnt, i; -u8 data[3 ]; +u8 *data;if (!nouveau_acpi_rom_supported (pdev))return ; bios->size =0 ; -if (nouveau_acpi_get_bios_chunk (data,0 ,3 ) ==3 ) + data =kmalloc (4096 ,GFP_KERNEL ); +if (data &&nouveau_acpi_get_bios_chunk (data,0 ,4096 ) >=3 ) bios->size = data[2 ] *512 ; +kfree (data);if (!bios->size)return ; ---Please attach acpidump output.
Quoted 14 lines · On Saturday 20 of October 2012 11:40:04 Martin Peres wrote:
Quoted 13 lines · Heinz Diehl
Quoted 4 lines · Linus Torvalds
Added more appropriate people to this. Added both i915 and nouveau people, since apparently that fine piece of hardware has both.
Guys, any ideas?
Plese see https://lkml.org/lkml/2012/10/19/371 , this is the same thing going on. Reverting
Ben Skeggs <[email protected]>
drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB
Quoted 6 lines
Quoted 1 line
fixes the problem.
Can you test the attached patch too ? I rebased the previous one I sent on top on 3.7-rc1 as I accidentally used an older version.
Martin
Hi all once again,
i've tested current 3.7.0-rc2-00145-g4864ccb and it works fine (boots and works with builtin core-i7 intel video) but i have one more question - what is the reason of loading nouveau driver for laptops with nvidia optimus and enabling vga switcheroo which doesn't work in such (optimus) cases. or maybe i've missed something and switchereoo works with optimus?
BR,
Paweł.
Quoted 3 lines · Paweł Sikora
what is the reason of loading nouveau driver for laptops with nvidia optimus and enabling vga switcheroo which doesn't work in such (optimus) cases.
You can safely compile a kernel without nouveau, your Nvidia card will not be used at all since neither Linux nor the proprietary nvidia driver does support optimus at this time (and frankly, I won't buy any further machines with opticrap). So having nouveau compiled and loaded seems like a waste of ressources in this case.
For me it's important to have nouveau working, because I try/use Bumblebee and optirun:
http://bumblebee-project.org/
https://fedoraproject.org/wiki/Bumblebee
Quoted 6 lines · On Thursday 25 of October 2012 20:06:54 Heinz Diehl wrote:
Quoted 3 lines · Paweł Sikora
what is the reason of loading nouveau driver for laptops with nvidia optimus and enabling vga switcheroo which doesn't work in such (optimus) cases.
Quoted 6 lines
You can safely compile a kernel without nouveau, your Nvidia card will not be used at all since neither Linux nor the proprietary nvidia driver does support optimus at this time (and frankly, I won't buy any further machines with opticrap). So having nouveau compiled and loaded seems like a waste of ressources in this case.
i've bought this asus laptop mostly for a developer's workstation replacement (quad-core-i7-avx cpu with integrated gpu, with 12GB ram and 2x500GB hdd). nvidia's addon is an optional crap :)
Quoted 5 lines
For me it's important to have nouveau working, because I try/use Bumblebee and optirun:
http://bumblebee-project.org/
https://fedoraproject.org/wiki/Bumblebee
i'll try to use transformers too :-)
A message that is not in the archive (sent off-list or not yet received): 1437818.9jlLBUTXHL@al
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 4 lines · On Sunday 21 October 2012 11:03:10 Heinz Diehl wrote:
The machine is the same, the BIOS is updated since then. The output of the actual "acpidump" is here:
The _ROM method is still the same. It looks like a general issue with Asus laptops. Pawel also has the Asus laptop <https://lkml.org/lkml/2012/10/21/11>
and has the same _ROM method. Some other acpidumps I have checked before also expose this behavior.
Ben, I am wondering what machine provided a VBIOS > 64KiB?
Regards,
Peter