Skip to contentSkip to conversation

result of pci=assign-busses on HP NW9440 laptop

DISCUSSION Eric Anderson 1 participant 1 message Aug 4, 2006

lore
Share & tools
lore
#0 lore raw

dmesg on booting a 2.6.17.7 kernel on the HP NW9440 laptop reports:

Quoted 2 lines

PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently

I'm not quite sure which part of the dmesg output I'm supposed to report. When I enable pci=assign-busses, the piece of dmesg that reports the warning says nothing, but later on in dmesg where it is printing out information about busses, it says:

Quoted 5 lines

PCI: Bus 6, cardbus bridge: 0000:05:06.0
IO window: 00006000-000060ff
IO window: 00006400-000064ff
PREFETCH window: 88000000-89ffffff
MEM window: 8a000000-8bffffff

Instead of PCI: Bus 3, ...

I didn't notice anything else changing. If I should run some other command or provide other output, tell me what to run and I'll report the output.

Please CC me directly since I'm not subscribed to linux-kernel.
-Eric