Skip to contentSkip to conversation

Video streaming over DCCP quality measurment

DISCUSSION rostislava slavova 2 participants 4 messages May 27, 2008

lore
Share & tools
lore
#0 lore raw

Hello,
Is anyone able to tell me what methods should I use to measure packet loss, delay and jitter of the stream over DCCP? I need to collect values of these parameters and compare them to the same via other well known protocols (UDP, TCP). Can you please help me, or at least point me in the right direction, as it seems to me that there is no software that can take these measurements. Any help will be much appreciated. Best regards,
Rossy

-----------------------------------------------------------------
Търси се двойник!
http://zoom.bg/page.php?bid=6
--
To unsubscribe from this list: send the line "unsubscribe dccp" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#1 lore raw

You could have a look at D-ITG:

http://www.grid.unina.it/software/ITG

it is a traffic generation and measurement platform able to emulate different application layer traffic models. It supports DCCP, UDP, TCP, and SCTP, and is able to log different information for the generated packets such as delay (both one way and round trip), jitter, loss, and throughput. Please have a look at the web site and the info therein, and do not hesitate to contact me in case you need further information.

Best regards.

AB

Quoted 12 lines · rostislava slavova

Hello,
Is anyone able to tell me what methods should I use to measure packet loss, delay and jitter of the stream over DCCP? I need to collect values of these parameters and compare them to the same via other well known protocols (UDP, TCP). Can you please help me, or at least point me in the right direction, as it seems to me that there is no software that can take these measurements. Any help will be much appreciated. Best regards,
Rossy

-----------------------------------------------------------------
Търси се двойник!
http://zoom.bg/page.php?bid=6
--
To unsubscribe from this list: send the line "unsubscribe dccp" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 12 lines
Alessio Botta, PhD Student
Dipartimento di Informatica e Sistemistica
Universita` degli Studi di Napoli Federico II
Via Claudio 21 -- 80125 Napoli (Italy)
Phone: +390817683821 - Fax: +390817683816
Email: [email protected]
         [email protected]
WWW: http://wpage.unina.it/a.botta
--
To unsubscribe from this list: send the line "unsubscribe dccp" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw
In reply to rostislava slavova

Thank you Mr. Botta, but by using D-ITG I get a generated test signal and parameters of this signal. And what about a real video stream? Is there any way to monitor it? Currently I'm using VLC for streaming and RTP as application layer protocol. As far as I know RTP is not implemented application layer protocol for D-ITG. Best regards,
Rossy

Quoted 28 lines

-------- Оригинално писмо --------
От: Alessio Botta <[email protected]>
Относно: Re: Video streaming over DCCP quality measurment До: rostislava slavova <[email protected]> Изпратено на: Вторник, 2008, Май 27 12:56:34 EEST
----------------------------------

You could have a look at D-ITG:

http://www.grid.unina.it/software/ITG

it is a traffic generation and measurement platform able to emulate different application layer traffic models. It supports DCCP, UDP, TCP, and SCTP, and is able to log different information for the generated packets such as delay (both one way and round trip), jitter, loss, and throughput. Please have a look at the web site and the info therein, and do not hesitate to contact me in case you need further information.

Best regards.

AB

Quoted 5 lines · rostislava slavova

Hello,
Is anyone able to tell me what methods should I use to measure packet loss, delay and jitter of the stream over DCCP? I need to collect values of these parameters and compare them to the same via other well known protocols (UDP, TCP). Can you please help me, or at least point me in the right direction, as it seems to me that there is no software that can take these measurements. Any help will be much appreciated. Best regards,
Rossy

Quoted 18 lines
Quoted 7 lines

-----------------------------------------------------------------
Търси се двойник!
http://zoom.bg/page.php?bid=6
--
To unsubscribe from this list: send the line "unsubscribe dccp" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 8 lines
Alessio Botta, PhD Student
Dipartimento di Informatica e Sistemistica
Universita` degli Studi di Napoli Federico II
Via Claudio 21 -- 80125 Napoli (Italy)
Phone: +390817683821 - Fax: +390817683816
Email: [email protected]
        [email protected]
WWW: http://wpage.unina.it/a.botta

-----------------------------------------------------------------
Търси се двойник!
http://zoom.bg/page.php?bid=6
--
To unsubscribe from this list: send the line "unsubscribe dccp" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
In reply to rostislava slavova

Dear Rossy,

D-ITG has some built-in models for VoIP traffic over RTP. This means that if you issue:

./ITGSend -a some_receiver_host VoIP -x G711.1 -h RTP

ITGSend will generate UDP packets with size and inter departure time that mimic those of a VoIP flow using RTP protocol and G.711 codec. Clearly, in such packets there will be no RTP header neither voice content, but the size and the inter packet time will be, at least, similar.

For video traffic, you could use some well known models such as that presented in "Analysis, modeling and generation of self-similar VBR video traffic" from Mark W. Garrett and Walter Willinger, and instruct ITGSend to generate UDP packets using the related packet size and inter packet time models.

Best regards.

AB

Quoted 57 lines · rostislava slavova

Thank you Mr. Botta, but by using D-ITG I get a generated test signal and parameters of this signal. And what about a real video stream? Is there any way to monitor it? Currently I'm using VLC for streaming and RTP as application layer protocol. As far as I know RTP is not implemented application layer protocol for D-ITG. Best regards,
Rossy

Quoted 28 lines

-------- Оригинално писмо --------
От: Alessio Botta <[email protected]>
Относно: Re: Video streaming over DCCP quality measurment До: rostislava slavova <[email protected]> Изпратено на: Вторник, 2008, Май 27 12:56:34 EEST
----------------------------------

You could have a look at D-ITG:

http://www.grid.unina.it/software/ITG

it is a traffic generation and measurement platform able to emulate different application layer traffic models. It supports DCCP, UDP, TCP, and SCTP, and is able to log different information for the generated packets such as delay (both one way and round trip), jitter, loss, and throughput. Please have a look at the web site and the info therein, and do not hesitate to contact me in case you need further information.

Best regards.

AB

Quoted 5 lines · rostislava slavova

Hello,
Is anyone able to tell me what methods should I use to measure packet loss, delay and jitter of the stream over DCCP? I need to collect values of these parameters and compare them to the same via other well known protocols (UDP, TCP). Can you please help me, or at least point me in the right direction, as it seems to me that there is no software that can take these measurements. Any help will be much appreciated. Best regards,
Rossy

Quoted 18 lines
Quoted 7 lines

-----------------------------------------------------------------
Търси се двойник!
http://zoom.bg/page.php?bid=6
--
To unsubscribe from this list: send the line "unsubscribe dccp" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 8 lines
Alessio Botta, PhD Student
Dipartimento di Informatica e Sistemistica
Universita` degli Studi di Napoli Federico II
Via Claudio 21 -- 80125 Napoli (Italy)
Phone: +390817683821 - Fax: +390817683816
Email: [email protected]
        [email protected]
WWW: http://wpage.unina.it/a.botta

-----------------------------------------------------------------
Търси се двойник!
http://zoom.bg/page.php?bid=6

Signature · 12 lines
Alessio Botta, PhD Student
Dipartimento di Informatica e Sistemistica
Universita` degli Studi di Napoli Federico II
Via Claudio 21 -- 80125 Napoli (Italy)
Phone: +390817683821 - Fax: +390817683816
Email: [email protected]
         [email protected]
WWW: http://wpage.unina.it/a.botta
--
To unsubscribe from this list: send the line "unsubscribe dccp" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html