Background memory scrubbing
Quoted 13 lines · Clemens Ladisch
Quoted 10 lines
Quoted 4 lines
Unfortunately in common with a large number of hardware platforms background scrubbing isn't supported in the hardware (even though ECC error correction is supported) and thus there is no BIOS option to enable it.
Which hardware platform is this? AFAICT all architectures with ECC (old AMD64, Family 0Fh, Family 10h) also have scrubbing support. If your BIOS is too dumb, just try enabling it directly (bits 0-4 of PCI configuration register
0x58in function 3 of the CPU's northbridge device, see the BIOS and Kernel's Developer's Guide for details).
Quoted 12 lines
Or even better, if on AMD, you can build the
amd64_edacmodule (CONFIG_EDAC_AMD64) and doecho >
/sys/devices/system/edac/mc/mc/sdram_scrub_ratewhere x is the scrubbing bandwidth in bytes/sec and y is the memory controller on the machine, i.e. node.
Signature · 2 lines
Regards/Gruss, Boris.
Unfortunately that also isn't an option on my platform(s). There surely must be a way for a module to be able to get a mapping for each physical page of memory in the system and to be able to use that mapping to do atomic read/writes to scrub the memory.
Quoted 16 lines · Robert Whitton
Quoted 16 lines · Clemens Ladisch
Quoted 10 lines
Quoted 4 lines
Unfortunately in common with a large number of hardware platforms background scrubbing isn't supported in the hardware (even though ECC error correction is supported) and thus there is no BIOS option to enable it.
Which hardware platform is this? AFAICT all architectures with ECC (old AMD64, Family 0Fh, Family 10h) also have scrubbing support. If your BIOS is too dumb, just try enabling it directly (bits 0-4 of PCI configuration register
0x58in function 3 of the CPU's northbridge device, see the BIOS and Kernel's Developer's Guide for details).Or even better, if on AMD, you can build the
amd64_edacmodule (CONFIG_EDAC_AMD64) and do
Quoted 6 lines
Quoted 4 lines
echo >
/sys/devices/system/edac/mc/mc/sdram_scrub_ratewhere x is the scrubbing bandwidth in bytes/sec and y is the memory controller on the machine, i.e. node.
Unfortunately that also isn't an option on my platform(s). There surely must be a way for a module to be able to get a mapping for each physical page of memory in the system and to be able to use that mapping to do atomic read/writes to scrub the memory.
For such questions I've added just the right ML to Cc :).
Signature · 15 lines
Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach General Managers: Alberto Bozzo, Andrew Bowd Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen Registergericht Muenchen, HRB Nr. 43632 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/ Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 17 lines · Borislav Petkov
Quoted 16 lines · Robert Whitton
Quoted 16 lines · Clemens Ladisch
Quoted 10 lines
Quoted 4 lines
Unfortunately in common with a large number of hardware platforms background scrubbing isn't supported in the hardware (even though ECC error correction is supported) and thus there is no BIOS option to enable it.
Which hardware platform is this? AFAICT all architectures with ECC (old AMD64, Family 0Fh, Family 10h) also have scrubbing support. If your BIOS is too dumb, just try enabling it directly (bits 0-4 of PCI configuration register
0x58in function 3 of the CPU's northbridge device, see the BIOS and Kernel's Developer's Guide for details).Or even better, if on AMD, you can build the
amd64_edacmodule (CONFIG_EDAC_AMD64) and do
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
echo >
/sys/devices/system/edac/mc/mc/sdram_scrub_ratewhere x is the scrubbing bandwidth in bytes/sec and y is the memory controller on the machine, i.e. node.
Unfortunately that also isn't an option on my platform(s). There surely must be a way for a module to be able to get a mapping for each physical page of memory in the system and to be able to use that mapping to do atomic read/writes to scrub the memory.
For such questions I've added just the right ML to Cc :).
There was a thread back in 2009 cwith the subject "marching through all physical memory in software" that discussed some of the issues of a software background scrub.
Chris
Signature · 12 lines
Chris Friesen Software Developer GENBAND [email protected] www.genband.com -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/ Don't email: <a href=mailto:"[email protected]"> [email protected] </a>