UBIFS: failed to read inode, error -2
Subject: UBIFS: failed to read inode, error -2
Hello.
I encountered an error while working with UBIFS on Toshiba TH58NVG3S0HBAI4 NAND chip, the kernel version is 4.19.78. The following errors appear when trying to access file named "SCND":
ubifs_lookup_level0: UBIFS DBG tnc (pid 906):
search key (8593, inode)ubifs_lookup_level0: UBIFS DBG tnc (pid 906):
found 0, lvl 0, n 3
UBIFS error (ubi0:4 pid 906): 0xc01fb7b9:
failed to read inode 8593, error -2ubifs_evict_inode: UBIFS DBG gen (pid 906):
inode 8593, mode 0x8000
UBIFS error (ubi0:4 pid 906):0xc01f8819: dead directory entry 'SCND', error -2
UBIFS warning (ubi0:4 pid 906):0xc01fe39b: switched to read-only mode, error -2
The file "SCND" was presumably broken because of the power-cut during writing. As a result, the file system became read-only. I'm setting the file system to read-write mode. I'm trying to erase the corrupted file. But this (like any action with this file) leads to the fact that the system becomes read-only again.
So my questions are:
1)Is there a way to repair UBI filesystem? Perhaps, some sort of fsck util for UBIFS?
2)Is there a way to remove a broken inode?
Thanks,
Andrey Korobchenko.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/