Skip to contentSkip to conversation

Hyperthreading - Found the answers

DISCUSSION Russell "Elik" Rademacher 2 participants 2 messages Dec 4, 2003 – Dec 7, 2003

lore
Share & tools
lore
#0 lore raw

Hello linux-kernel,

Thanks folks. Apparently, the documentations are little buried under but apparently, needed to have boot time parameter as follows: acpismp=force to have the hyperthreading to show up properly.

Signature · 3 lines
Best regards,
Russell "Elik" Rademacher
Freelance Remote System Adminstrator/Tech Support    
#1 lore raw
Quoted 5 lines · Russell "Elik" Rademacher

Hello linux-kernel,

Thanks folks. Apparently, the documentations are little buried under
but apparently, needed to have boot time parameter as follows:
acpismp=force to have the hyperthreading to show up properly.

fwiw, on my xeon box i need to use "acpi=ht" or else the acpi code causes 80000 interrupts per second, even when idle. (this is with 2.4.22, on a tyan 2723 with whatever their latest bios was as of three or four months ago.)

-dean