Skip to contentSkip to conversation

Question about the dd command

DISCUSSION Eric Tchepannou 3 participants 3 messages Sep 18, 2002

lore
Share & tools
lore
#0 lore raw

Hi all,

I am trying to build a boot image in order to boot from a CD device. I have already created all the parts ( Kernel, Lilo and Rootfs ) and try to bring them together. I first copied it on a floppy in order to see wether I could boot from it and it worked. In the Linux-Bootdisk-HOWTO It is said that on should transfer the rootfs with the following command

dd if=rootfs of=/dev/fd0 bs=1k seek=KERNEL_BLOCKS

I calculated the KERNEL_BLOCK value in my case and applied the command. It is supposed to transfer the rootfs file into the same floppy containing the kernel. I am surprised to see that with a ls-command the rootfs.gz is invisible on the floppy, though the boot process from floppy works properly. Later i created an image of the floppy ( dd if=/dev/fd0 of=boot.img bs=10k count=144 as in the Linux-Bootdisk-HOWTO ), created an iso file from it with mkisofs and copied it on CD. Now I can't boot the image from this CD!

I hope I am in the appropriate ML, I hope someone can help me with this issue,

Regards.

Eric

Signature · 2 lines
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
#1 lore raw

Hi,

Quoted 8 lines

I am trying to build a boot image in order to boot from a CD device. I have already created all the parts ( Kernel, Lilo and Rootfs ) and try to bring them together. I first copied it on a floppy in order to see wether I could boot from it and it worked. In the Linux-Bootdisk-HOWTO It is said that on should transfer the rootfs with the following command

dd if=rootfs of=/dev/fd0 bs=1k seek=KERNEL_BLOCKS

Quoted 7 lines

I calculated the KERNEL_BLOCK value in my case and applied the command. It is supposed to transfer the rootfs file into the same floppy containing the kernel. I am surprised to see that with a ls-command the rootfs.gz is invisible on the floppy, though the boot process from floppy works properly. Later i created an image of the floppy ( dd if=/dev/fd0 of=boot.img bs=10k count=144 as in the Linux-Bootdisk-HOWTO ), created an iso file from it with mkisofs and copied it on CD. Now I can't boot the image from this CD!

I'm assuming that you're trying to create a bootable CD for an X86 machine.

In that case, this is not how bootable CDs work. You need to look up the 'El-Torito' bootable CD specs, and take it from there.

John.

#2 lore raw
In reply to Eric Tchepannou
Quoted 6 lines · Eric Tchepannou

Hi all,

dd if=rootfs of=/dev/fd0 bs=1k seek=KERNEL_BLOCKS

I am surprised to see that with a ls-command the rootfs.gz is invisible

Quoted 1 line

on the floppy, though the boot process from floppy works properly.

That's Obvious. you do not have a filesystem on /dev/fd0 and hence 'ls' wont work.

Quoted 5 lines

Later i
created an image of the floppy ( dd if=/dev/fd0 of=boot.img bs=10k count=144 as in the Linux-Bootdisk-HOWTO ), created an iso file from it with mkisofs and copied it on CD. Now I can't boot the image from this CD!

Try using xcdroast.

Signature · 2 lines
The art of life is drawing sufficient conclusions from insufficient
premises