Skip to contentSkip to conversation

multi channels input and single channel out

DISCUSSION hong zhang 3 participants 5 messages May 5, 2011 – May 6, 2011

lore
Share & tools
lore

hong zhang

author
#0 lore raw

List,

I have 8 channels of hdmi input and one channel output on my board.
When arecord -f dat hdmi-rx.wav to store 8 channels data, aplay -f dat hdmi-rx.wav releases noise.

Ia there any way arecord stores each channel data to 8 different files? Or I have to do beam forming to sort 8 channels out by custom application?

Thanks.

---henry

#1 lore raw
Quoted 6 lines · hong zhang

List,

I have 8 channels of hdmi input and one channel output on my board.
When arecord -f dat hdmi-rx.wav to store 8 channels data, aplay -f dat hdmi-rx.wav releases noise.

Ia there any way arecord stores each channel data to 8 different files?

check out the "--separate-channels" option for arecord. see if it meets your needs.

Quoted 9 lines

Or I have to do beam forming to sort 8 channels out by custom application?

Thanks.

---henry
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Signature · 1 line
guanqun
author
#2 lore raw

"--separate-channels" option only allows two files for two channels. Interesting thing is plughw:0,1 -c 1 works only for one pin input (two channels).

plughw:0,1 -c 1 complains overrun for 6 channels (3 input pins) input.

Quoted 34 lines · Lu Guanqun

From: Lu Guanqun <[email protected]>
Subject: Re: [alsa-devel] multi channels input and single channel out
To: "hong zhang" <[email protected]>
Cc: "[email protected]" <[email protected]>
Date: Thursday, May 5, 2011, 7:23 PM

Quoted 3 lines · hong zhang

List,

I have 8 channels of hdmi input and one channel output

on my board.

Quoted 1 line

When arecord -f dat hdmi-rx.wav to store 8 channels

data, aplay -f dat hdmi-rx.wav releases noise.

Quoted 2 lines

Ia there any way arecord stores each channel data to 8

different files?

check out the "--separate-channels" option for arecord. see if it meets your needs.

Quoted 1 line

Or I have to do beam forming to sort 8 channels out by

custom application?

Quoted 8 lines

Thanks.

---henry
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Signature · 1 line
guanqun
#3 lore raw

At Thu, 5 May 2011 17:31:06 -0700 (PDT),

Quoted 2 lines · hong zhang

"--separate-channels" option only allows two files for two channels.

No. You passed -fdat, right? "dat" format specifies 2 channels. Pass -c8 after -fdat.

Takashi

Quoted 45 lines

Interesting thing is plughw:0,1 -c 1 works only for one pin input (two channels).

plughw:0,1 -c 1 complains overrun for 6 channels (3 input pins) input.

Quoted 23 lines · Lu Guanqun

From: Lu Guanqun <[email protected]>
Subject: Re: [alsa-devel] multi channels input and single channel out
To: "hong zhang" <[email protected]>
Cc: "[email protected]" <[email protected]>
Date: Thursday, May 5, 2011, 7:23 PM

Quoted 3 lines · hong zhang

List,

I have 8 channels of hdmi input and one channel output

on my board.

Quoted 1 line

When arecord -f dat hdmi-rx.wav to store 8 channels

data, aplay -f dat hdmi-rx.wav releases noise.

Quoted 2 lines

Ia there any way arecord stores each channel data to 8

different files?

check out the "--separate-channels" option for arecord. see if it meets your needs.

Quoted 1 line

Or I have to do beam forming to sort 8 channels out by

custom application?

Quoted 1 line
Quoted 11 lines
Quoted 7 lines

Thanks.

---henry
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Signature · 1 line
guanqun

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

author
#4 lore raw

Yes, you are right. But 6 files (3 pins) size is same 4096 see following.

$arecord -f S16_LE -r 48000 -c 6 -D plughw:0,1 --separate-channels c1.wav c2.wav c3.wav c4.wav c5.wav c6.wav Recording raw data 'c1.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 6

$ll c*
-rw-r--r-- 1 root root 4096 2011-05-06 09:44 c1.wav -rw-r--r-- 1 root root 4096 2011-05-06 09:44 c2.wav -rw-r--r-- 1 root root 4096 2011-05-06 09:44 c3.wav -rw-r--r-- 1 root root 4096 2011-05-06 09:44 c4.wav -rw-r--r-- 1 root root 4096 2011-05-06 09:44 c5.wav -rw-r--r-- 1 root root 4096 2011-05-06 09:44 c6.wav

$aplay -f S16_LE -r 48000 -c 1 -D plughw:0,0 c1.wav

does not have sound.

Are my commands right?

Quoted 80 lines · Takashi Iwai

From: Takashi Iwai <[email protected]>
Subject: Re: [alsa-devel] multi channels input and single channel out
To: "hong zhang" <[email protected]>
Cc: "[email protected]" <[email protected]>, "Lu Guanqun" <[email protected]>
Date: Friday, May 6, 2011, 12:51 AM
At Thu, 5 May 2011 17:31:06 -0700
(PDT),

Quoted 2 lines · hong zhang

"--separate-channels" option only allows two files for

two channels.

No.  You passed -fdat, right?  "dat" format
specifies 2 channels.
Pass -c8 after -fdat.

Takashi

Quoted 1 line

Interesting thing is plughw:0,1 -c 1 works only for

one pin input (two channels).

Quoted 2 lines

plughw:0,1 -c 1 complains overrun for 6 channels (3

input pins) input.

Quoted 2 lines

--- On Thu, 5/5/11, Lu Guanqun <[email protected]>

Quoted 3 lines · wrote:
Quoted 3 lines

From: Lu Guanqun <[email protected]>
Subject: Re: [alsa-devel] multi channels input

and single channel out

Quoted 2 lines
Quoted 2 lines

To: "hong zhang" <[email protected]>
Cc: "[email protected]"

<[email protected]>

Quoted 6 lines
Quoted 6 lines

Date: Thursday, May 5, 2011, 7:23 PM

Quoted 3 lines · hong zhang

List,

I have 8 channels of hdmi input and one

channel output

Quoted 2 lines
Quoted 2 lines

on my board.

Quoted 1 line

When arecord -f dat hdmi-rx.wav to store 8

channels

Quoted 3 lines
Quoted 3 lines

data, aplay -f dat hdmi-rx.wav releases noise.

Quoted 2 lines

Ia there any way arecord stores each channel

data to 8

Quoted 3 lines
Quoted 3 lines

different files?

check out the "--separate-channels" option for

arecord.

Quoted 3 lines
Quoted 3 lines

see if it meets your needs.

Quoted 1 line

Or I have to do beam forming to sort 8

channels out by

Quoted 6 lines
Quoted 6 lines

custom application?

Quoted 5 lines

Thanks.

---henry

_______________________________________________

Quoted 4 lines
Quoted 4 lines
Quoted 3 lines

Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Quoted 8 lines
Quoted 3 lines
Signature · 1 line
guanqun

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel